气浮过程中的界面相互作用

首先讨论了水体颗粒物的基本性质以及气泡的形成过程，而后对气液界面上胶体颗粒的吸附进行分析。其次讨论了气浮过程中，气泡与颗粒物之间的相互作用。对气泡与颗粒物之间的碰撞进行分析。结合紊流气浮的理论与应用，在气浮过程中的界面相互作用分析的基础上。设计了一种新型集成的溶气气浮水处理工艺，即逆流共聚气浮工艺，并对其运行情况进行了研究。探讨了其中的界面相互作用对气浮效果的影响，进一步与传统工艺进行了对比。     

水域悬浮固体含量的遥感定量研究

该文提出了反射率与悬浮固体含量之间的理论关系式——负指数关系式,并确定了其与经验公式的关系。理论分析和实际应用的结果表明,该式精度高于原有公式的精度,是目前遥感水中悬浮固体含量的最佳公式。将该式应用于杭州湾水域悬浮固体含量调查中取得了成功。     

皮革和毛皮加工废水处理技术

采用混凝沉淀-酸化水解-悬挂链曝气-生物接触氧化组合工艺处理皮革和毛皮加工生产废水。实验结果表明;进水COD为2400mg/L,处理后出水COD≤100mg/L,去除率≥95.8%。各项水质指标均稳定地达到了GB8978-96污水综合排放一级标准。     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.     

分子筛生产废水中悬浮物的絮凝与回用

对分子筛生产废水进行了絮凝沉降分离试验，确定了絮凝剂、助凝剂及絮凝敢分离条件。试验结果表明，絮凝沉降所得到的絮凝物料的化学组成、结构、性能与絮凝前原废水中的悬浮物基本一致，可返回原生产工序中使用。     

除湿机的冷凝水化学成分与空气环境质量的关系

本文采用家用除湿机作为空气水溶性物质采样器方法，并验证了该方法作为空气水溶性物质采样嚣的可行性。本文通过空气冷凝水化学成分与空气总悬浮微粒(TSP)可溶性化学成分的对比，得到水汽中大部分阴阳离子的含量只比TSP低1个数量级，而水汽中的微量元素含量与各种碳的浓度不都比TSP低，TSP中一般检测不出亚硝酸根，而水汽中则检出大量亚硝酸根。     

CHARACTERIZATION OF INORGANIC PARTICLES IN SELECTED RESERVOIRS AND TRIBUTARIES OF THE NEW YORK CITY WATER SUPPLY1

ABSTRACT: Individual particle analysis (IPA) by scanning electron microscopy interfaced with automated image and X‐ray analyses was used to characterize inorganic particles in five reservoirs and four tributaries located within the Catskill and Delaware systems of the New York City water supply. Individual particle analysis provides combined elemental and morphologic characterizations. Results are presented in terms of particle projected area per unit volume (PAV), consistent with optical impacts, and partitioned into seven generic particle types according to composition. Minerals of terrigenous origins, particularly clay minerals, dominated the inorganic particle populations of all the study systems except one downstream reservoir. Higher PAV levels were observed in the Catskill system. Particle dynamics represented by PAV were driven primarily by runoff, while the reservoirs were also greatly influenced by the timing of sediment resuspension promoted by drawdown of the surface and fall mixing. The benefit of the serial configuration of the reservoirs in decreasing inorganic particles with progression downstream towards the city is demonstrated. The patterns in PAV levels among the study systems generally tracked those of more common metrics of impacts of suspensoids, including mass concentrations of suspended solids, turbidity, and Secchi disc transparency.     

用于煤矿安全切割的前混合磨料射流加速机理研究

前混合磨料射流具有切割各种材料无火花、所需设备压力低以及操作简单等优点,具有广泛应用井下安全切割的功能。笔者根据建立的磨料粒子运动方程,推导出具有普遍意义的匀速流场内粒子路程函数以及用数值分析法求解出粒子在喷嘴内的速度;通过理论分析和具体的数值计算,磨料最主要的加速过程是在收缩段内完成,磨料粒子从喷嘴喷出时已能高达水流速度的95 %以上,磨料粒子在离开喷嘴在射流的核心段内仍将继续得到加速;同时发现,在条件允许的情况下,喷嘴的收缩段应适当长些,喷嘴圆柱段长度为喷嘴出口直径的2 .5～3.0倍最合适。     

基于改进粒子群算法和元胞自动机的城市扩张模拟——以南京为例

为合理利用多智能体算法解决城市扩张动态模拟问题,基于地理学理论和社会学规律对粒子群算法进行有针对性的改进,提出分段式粒子群算法(SPSO),并结合元胞自动机模拟复杂时空过程的能力,构建出适用于城市扩张模拟的地理元胞自动机SPSO-CA。在SPSO-CA中我们利用多时像的土地利用数据、交通路网数据和地形数据,挖掘出1995~2000年南京城市扩张的土地转换规则。再由此规则实现1995~2008年的南京市城市扩张过程的动态模拟。最后对比SPSO-CA、PSOCA及NULL模型结果得:SPSO-CA总精度86.3%,Kappa系数为0.792,Moran’s I为0.078,PSO-CA总精度83.6%,Kappa系数为0.755,Moran’s I为0.054,NULL模型总精度81.9%,Kappa系数为0.741,真实的Moran’s I为0.072。这表明无论是总精度还是空间一致性,SPSO-CA都优于PSO-CA和NULL模型,即用SPSO-CA模拟城市扩张是可行的。