膨胀石墨污水净化处理研究

利用膨胀石墨强大的吸附能力来处理城市生活污水,结果发现用膨胀石墨处理污水的前8h,COD的去除率达43％;处理第5～9d将出现第二个高峰,COD的去除率达48％,分析原因可能是存在物理吸附和微生物絮凝两方面的作用。最后经过20d的处理,膨胀石墨对生活污水的COD和BOD总去除率分别达到86％、78．9％,且除臭能力也很显著。     

碱改性脱水污泥对水中镉的吸附效能研究

城市市政污水处理厂产生的剩余污泥是一种良好的重金属生物吸附剂制备原料。以北京某市政污水处理厂产生的脱水剩余污泥为原料,采用碱改性处理方法,制备得到碱改性脱水污泥生物吸附剂,通过其对水中镉的等温吸附实验,考察其重金属吸附效能。研究结果表明:碱改性脱水污泥对水中镉的等温吸附曲线符合Langmuir等温吸附模型。碱改性处理后,脱水污泥对水中镉的最大饱和吸附容量提高了2.8倍,达0.966 mmol/g,显著高于同类型脱水污泥生物吸附剂。碱改性脱水污泥对水中镉的最大饱和吸附容量与改性过程中所使用的Na OH浓度之间的线性相关性较差,呈现一定的波动变化趋势。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

Pd/activated carbon sorbents for mid-temperature capture of mercury from coal-derived fuel gas

Higher concentrations of Hg can be emitted from coal pyrolysis or gasification than from coal combustion, especially elemental Hg. Highly efficient Hg removal technology from coal-derived fuel gas is thus of great importance. Based on the very excellent Hg removal ability of Pd and the high adsorption abilities of activated carbon（AC） for H2 S and Hg, a series of Pd/AC sorbents was prepared by using pore volume impregnation, and their performance in capturing Hg and H2 S from coal-derived fuel gas was investigated using a laboratory-scale fixed-bed reactor. The effects of loading amount, reaction temperature and reaction atmosphere on Hg removal from coal-derived fuel gas were studied. The sorbents were characterized by N2 adsorption, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The results indicated that the efficiency of Hg removal increased with the increasing of Pd loading amount, but the effective utilization rate of the active component Pd decreased significantly at the same time. High temperature had a negative influence on the Hg removal. The efficiency of Hg removal in the N2-H2S-H2-CO-Hg atmosphere（simulated coal gas） was higher than that in N2-H2S-Hg and N2-Hg atmospheres, which showed that H2 and CO, with their reducing capacity, could benefit promote the removal of Hg. The XPS results suggested that there were two different ways of capturing Hg over sorbents in N2-H2S-Hg and N2-Hg atmospheres.     

油风化对吸油毡吸附量影响的研究

选取天然羽毛压缩物和复合聚酯纤维两种吸油毡,取4种油(2种原油和2种燃料油)进行短期风化,测量2种吸油毡对不同风化程度油的吸附量。分析结果发现,随着油风化程度的增强,天然羽毛对其中3种油的吸附量稍有增加,而对其中较轻原油的吸附量减小明显;复合聚酯纤维吸油毡对4种油的吸附量都增加,且增加幅度大于天然羽毛。原因是天然羽毛孔隙大材质厚,主要靠孔隙吸油,而聚酯纤维孔隙小且薄,表面粘附油的比重较大。对高密度油而言,风化程度越大,吸油毡越难靠孔隙对其渗透吸收,而表面粘附油占总吸附量的比重增加。可见,在应对不同风化程度油时,选取吸油毡须有针对性,才能最大限度地清除油污。     

桑枝基吸附剂的制备及其对阴离子染料的吸附

为了废弃桑枝的资源化,利用3-氯-2-羟丙基三甲基氯化铵(CTA)对桑枝进行醚化改性制备桑枝基吸附剂,通过正交实验优化了吸附剂的制备条件。采用制备的吸附剂吸附水中阴离子染料日落黄,研究了pH值、吸附剂投加量、吸附时间和吸附温度对吸附效果的影响,测定了日落黄在吸附剂上的吸附等温线。结果表明,制备吸附剂的最佳工艺条件为CTA与桑枝粉的质量比为0.5,NaOH与桑枝粉的质量比为1.0,微波功率为300 W,反应时间为3 min。制备的吸附剂对质量浓度为50 mg/L的日落黄的最大吸附去除率达92.0%。日落黄在吸附剂上的等温吸附线可用Langmuir方程和Freundlich方程来描述,饱和吸附容量为18.21 mg/g,吸附易于进行。吸附速率数据可以用准二级吸附动力学方程拟合,说明日落黄在吸附剂上的吸附以化学吸附为主。     

海底油气管道泄漏的原因及防范

随着全球油气工业正在向海洋进军,人类钻井足迹从陆地延伸到海洋,茫茫大海中出现越来越多的油气钻井平台,犹如洒在蔚蓝海面的点点星光。海底蜿蜒曲折的油气管道,成为全球能源运输动脉的重要组成部分。与此同时,随着海底油气管道不断延伸变长,海底油气管道破裂泄漏的风险也悄然增加,成为海洋溢油事故的原因之一,防范海底油气管道的泄漏已成当务之急。与传统碰撞或触礁导致油轮泄漏、钻采平台操作失误或部件老化等原因引发的溢油事故相比,海底油气管道破裂在行为模式、影响范围、修复周期等方面都有明显不同,因此应对策略和预防措施也必须加以调整。     

海洋溢油生态损害评估模型研究进展

近年来,中国沿海溢油事件频频发生,海洋溢油的损害评估越来越受到人们的关注。由于国内在这方面的研究起步较晚,尚未形成完善的溢油损害评估体系,海洋溢油事故所造成的生态损害往往被低估。本文着重介绍海洋溢油生态损害评估常用模型的研究进展,主要包括自然资源损害评估模型中的Type A模型、生境等价分析法以及针对中小型溢油的简易评估模型,分析了模型在实际应用中存在的一些问题,包括溢油数据库不够完善、部分损失难以量化、参数输入存在一定的主观性和不确定性以及深海溢油的适用性不高等。最后提出我国应通过借鉴国外相对成熟的评估方法,建立一套完善的适合我国国情的海洋溢油生态损害评估体系。     

电磁流体海面浮油回收分离技术的研究

详细介绍了电磁流体海面浮油回收分离技术的运行过程和特点;阐述了电磁流体海面浮油回收分离过程中电磁场作用下的水、气、油多相介质的流动特性和系统性能特征及其影响因素;重点介绍了油污水处理量1 000 L/h的电磁流体海面浮油回收分离装置实验室样机的研制和水槽油污水回收分离试验。试验结果表明:油层厚度在3 mm~4 mm时,工作电流密度2 300 A/m2,油污海水处理量1 100 L/h,平均收油量(32~56)L/h;油膜厚度小于1 mm、甚至是微米级油膜,回收分离效果明显;回收油含水率小于5%,处理后的海水达到国标第四类海水水质无明显油膜的标准。