Application of magnetic particles modified with amino groups to adsorb copper ions in aqueous solution

A magnetic adsorbent can be easily recovered from treated water by magnetic force,without requiring further downstream treatment.In this research,amine-functionalized silica magnetite has been synthesized using N-[3-(trimethoxysilyl)propyl]-ethylenediamine(TPED) as a surface modification agent.The synthesized magnetic amine adsorbents were used to adsorb copper ions in an aqueous solution in a batch system,and the maximum adsorption was found to occur at pH 5.5 ± 0.1.The adsorption equilibrium data fitted t...     

北京地区大气细颗粒物的个体暴露水平

于2012年12月至2013年4月采用LD6S型微电脑激光粉尘仪在北京地区采取单人逐日跟踪的方式记录了多名个体对大气细颗粒物(PM2.5)的暴露水平,同时收集研究对象的时间-活动日志,计算日平均暴露水平,再进行多人多日合并处理.并于研究时段内同步记录北京市环境保护监测中心发布的空气质量监测数据.结果表明,研究期间北京地区冬季与春季PM2.5的平均浓度分别为127,69μg/m3.个体日均暴露水平中值为54μg/m3,与大气质量浓度的平均比值为0.60.个体室内暴露分量均值达到总暴露量的80%,室外与交通各占约10%.不同人群及季节的暴露水平之间未表现出显著差异.当大气环境质量浓度高于国家空气质量二级标准浓度限值时,室内住宅、办公室和餐厅,室外公交车、街道微环境中的PM2.5质量浓度与大气环境质量浓度存在显著的相关关系.     

细颗粒物污染成室内主要污染

正2013年12月27日,全国室内车内环保行业发展工作会举行,国家室内车内环境及环保产品质量监督检验中心主任宋广生发布了"2013年全国室内环境车内空气质量十大新闻".据中国室内环境监测工作委员会检测调查分析,室外雾霾天气时,80%的室内环境细颗粒物超标,室内环境的细颗粒物污染已经成为我国家庭中的主要污染物.雾霾污染带来了空气净化器的热销,而空气净化器质量成为家用电     

纳米铁的合成、性质及其在环境修复领域的应用

由于纳米铁的特殊性质,它在环境修复领域中的应用日渐增加。本文主要介绍了纳米铁的合成、性质以及在环境修复领域的应用情况。文章归纳了目前常用的几种纳米铁合成的物理方法和化学方法;介绍了纳米铁微粒重要的理化性质;并总结了纳米铁用于修复含氯有机物污染、重金属污染和其他无机物污染场地的应用情况。     

Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst

The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

安徽省霍山县东溪-南关岭金矿地质特征与成矿条件

东溪-南关岭金矿为北淮阳东段发现的第一个原生金矿,产于磨子潭-晓天中生代火山盆地边缘,容矿围岩为安山质-英安质火山岩,矿化和蚀变受桐柏-桐城深大断裂带的次级构造带控制。该金矿发育陡倾斜的脉状矿体和缓倾斜的似层状矿体,成因类型为冰长石-绢云母型浅成低温热液金矿。火山岩盆地之下的变质基底可能起到了初始矿源层作用,桐柏-桐城断裂带及其次级构造破碎带为重要的导岩导矿构造,早白垩世强烈的岩浆活动提供了热源、动力源和部分矿源。参照国内外类似金矿的特征,认为本区成矿地质条件良好,有可能隐伏着与石英正长岩体有关的细脉浸染型矿化,晓天火山盆地具有良好的找矿前景。     

天津市夏季蜂窝状溶蚀器涂层溶液浓度确定的实验研究

于2013年7月1日～8月31日,在天津市南开大学理化楼楼顶,采用蜂窝状溶蚀器进行了溶蚀器涂层溶液最适浓度的探究实验.结果表明,在天津夏季,蜂窝状溶蚀器的碳酸钠涂层溶液最适浓度为3%,柠檬酸涂层溶液最适浓度为6%.含有溶蚀器系统的颗粒物采样法与传统采样法对比发现,含蜂窝状溶蚀器的采样系统所得到的PM2.5样品浓度有86%低于传统方法所得到的PM2.5样品浓度,其原因主要为1酸/碱性气体被去除,使其无法与富集在采样膜上的颗粒物发生反应,也无法吸附到颗粒物上;2溶蚀器系统采样过程中,部分颗粒物被捕集到溶蚀器上;3酸/碱性气体被去除,导致气-粒平衡被打破,部分颗粒物组分向气态转化.     

双级虚拟撞击采样器应用于固定污染源PM10和PM2.5排放测量

为贯彻落实《大气污染防治行动计划》,环境保护部指导各地开展大气污染源排放清单编制工作,其中包括固定源PM_(10)和PM_(2.5)的排放清单.但目前国内尚无固定源PM_(10)和PM_(2.5)标准采样方法.本研究提出了适合我国固定源PM_(10)和PM_(2.5)测量的双级虚拟撞击采样方法,开发了相应的分级采样系统,并用该方法对各类固定源进行了现场测试.测试结果表明,所测试的煤粉炉电厂的烟囱入口PM_(2.5)质量浓度为(0.93±0.03)mg·m~(-3),PM_(10)质量浓度为(1.13±0.11)mg·m~(-3).所测试的垃圾焚烧电厂的烟囱排放口PM_(2.5)质量浓度为(3.3±0.65)mg·m~(-3),PM_(10)质量浓度为(6.9±0.86)mg·m~(-3).所测试的大型循环流化床发电厂的烟囱排放口PM_(2.5)质量浓度为(0.59±0.04)mg·m~(-3),PM_(10)质量浓度为(1.12±0.16)mg·m~(-3).所测试的钢铁转炉的烟囱排放口PM_(2.5)质量浓度为(0.15±0.04)mg·m~(-3),PM_(10)质量浓度为(0.43±0.15)mg·m~(-3).     

重庆市主城区大气细颗粒物污染特征与来源解析

重庆市主城区大气细颗粒物(PM_(2.5))浓度从1990s的100μg·m~(-3)下降至当前的约70μg·m~(-3),但仍高于环境标准限值.为探讨重庆市主城区PM_(2.5)化学组成与来源特征,于2012—2013年在渝北区大气超级站利用四通道采样仪连续采集了颗粒物样品,分析了其中水溶性离子、碳质组分和无机元素含量.采样期间,重庆市主城区大气PM_(10)和PM_(2.5)的年日均浓度分别为103.9和75.3μg·m~(-3),扩散条件不利的冬季,细颗粒物污染较为严重.受静稳天气影响的1月和2月,受沙尘影响的3月,及二次转化显著的6月是重庆市细颗粒物污染较重的月份.重庆市PM_(2.5)组成以有机物(OM,30.8%)为主,其次为硫酸盐(SO_4~(2-),23.0%)、硝酸盐(NO_3~-,11.7%)、铵盐(NH_4~+,10.9%)、地壳物质(Soil,8.2%)、元素碳(EC,5.2%)、K~+(1.1%)、Cl~-(1.0%)和微量元素(Trace,0.6%).较高的SO_4~(2-)浓度和逐步上升的[NO_3~-]/[SO_4~(2-)]比值反映了重庆市燃煤污染较重,同时机动车污染比例逐步增加.采用主因子分析/绝对主因子得分法解析了重庆城区细颗粒物5类主要来源是:二次粒子(41.7%)、燃煤(15.6%)、建筑/道路尘(12.4%)、土壤尘(11.0%)和工业尘(10.4%),通过各污染源季节变化及与其他结果对比,该源解析结果能够较可靠反映重庆市细颗粒物的来源信息.