Impacts of wastewater sludge amendments in restoring nitrogen cycle in p-nitrophenol contaminated soil

The possible impacts on nitrogen-cycle in a p-nitrophenol (PNP) polluted soil and the e ectiveness of wastewater sludge amendments in restoring nitrification potential and urease activity were evaluated by an incubation study. The results indicated that PNP at 250 mg/kg soil inhibited urease activity, nitrification potential, arginine ammonification rate and heterotrophic bacteria counts to some extents. After exposure to PNP, the nitrification potential of the tested soil was dramatically reduced to zero over a period of 30 days. Based on the findings, nitrification potential was postulated as a simple biochemical indicator for PNP pollution in soils. Nitrogen-cycling processes in soils responded positively to the applications of wastewater sludges. A sludge application rate of 200 tons/ha was su cient for successful biostimulation of these nitrogen processes. The microbial activities in sludge-amended, heavy PNP-polluted soils seemed to recover after 30–45 days, indicating the e ectiveness of sludge as a useful soil amendment.     

Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

Effect of anaerobic digestion on the high rate of nitritation, treating piggery wastewater

Laboratory reactors were operated by using piggery wastewater and the effluent of anaerobic digester from piggery wastewater plants to study the effect of anaerobic digestion on nitritation rate.     

铅酸电池的回收处理工艺

本文阐述了铅酸电池的资源化回收利用的工艺技术,通过分析废铅合金板的回收再利用技术及电解液、含铅废水、废气处理工艺的优、缺点探索铅酸电池回收利用技术的发展趋势。     

吹扫捕集-气相色谱法测定水中的乙醛和丙烯醛

建立了吹扫捕集-气相色谱法测定水样中乙醛和丙烯醛的方法,并对吹扫捕集测试条件进行优化,考察了吹扫温度和吹扫时间对吹扫捕集效率和方法检出限的影响。在50℃下,吹扫时间为20 min时,该方法乙醛和丙烯醛的检出限分别为0.001 2 mg/L、0.000 6 mg/L,相对标准偏差分别为3.5%～6.9%、2.9%～5.8%,加标回收率分别为91.6%～108%、92.0%～105%。与GB3838-2002推荐使用的分析方法相比较,该方法具有操作简便、灵敏度高、重复性好、基本上不消耗有机溶剂等特点,可满足地表水和废水中乙醛和丙烯醛的测定要求。     

酒精废水处理及资源利用

通过对酒精废水的水质特性、污染情况及治理现状的分析,提出了污水综合治理的工艺流程,包括预处理、二级UASB、好氧活性污泥法.通过一系列的牛物及物理化学方法在酒精废水处理工程中的实际应用,COD、BOD5、SS去除率均＞99%,达到国家<污水综合排放标准>(GB 8978-1996)二级标准,有效地削减了酒精废水的排放量...     

等离子体催化降解有机废水研究

研究了多种因素对高压脉冲介质阻挡放电低温等离子体法处理印染废水效果的影响。通过实验得出结论:随着有效处理时间和峰值外施电压的增加,废水中的有机物的去除率增加;随着水样浓度的增加,废水中有机物的去除率降低;随着催化剂(TiO)2量的增加,废水中有机物的去除率先升高后降低,最佳催化剂的加入量为0.5 g/L TiO2悬浮液0.5 mL。     

酸析+臭氧+MBR工艺处理手机显示屏厂废水

哈威特光电技术有限公司是一家生产手机显示屏强化玻璃的企业,主要生产废水为油墨废水、研磨废水、清洗废水,其中油墨废水COD浓度高达8 000～12 000 mg/L,废水呈碱性且可生化性差;污水处理采用酸析+臭氧+MBR工艺,其中酸析法主要对油墨废水进行预处理,臭氧氧化提高综合废水的B/C比,最后进入膜生化装置MBR处理,出水能达到污水综合排放标准(GB8978-1996)的一级标准。     

磁性膨润土材料吸附处理印染废水研究

针对目前膨润土在应用中的一些问题,对膨润土进行磁性能改性,通过共沉淀法制备磁性膨润土颗粒,并对其进行了X射线衍射和磁性能表征分析.以阴离子染料OrangeⅡ为目标化合物,研究了磁性膨润土材料对OrangeⅡ废水的吸附效果,并探讨了主要工艺参数如阳离子表面活性剂的质量浓度、pH、温度等对染料去除率的影响.结果表明:阳离子...     

化学沉淀法处理线路板厂络合铜废水实验研究

为解决某线路板厂络合铜废水达标排放的问题,模拟该厂络合铜废水处理的工艺条件,采用硫酸亚铁和硫化钠相结合的化学沉淀法进行小试,通过正交实验确定最佳药剂投加量.结果表明,影响络合铜废水处理效果的各因素的重要性顺序依次为pH、PAM、FeSO4·7H2O、LIME、Na2S;处理500mL络合铜废水的最佳的操作条件是废水初始...