微絮凝双层滤料过滤处理含油废水试验研究

针对机电和机械加工行业排水中含油废水的特性 ,提出了微絮凝双层滤料过滤法处理工艺。通过实验 ,肯定了其良好的除油效果 ,并对影响除油率的因素进行了分析讨论 ,确定了处理工艺流程及合理的设计参数     

Effects of simulated acid rain on cation release in soils of South China

This paper deals with the release of base cations and Al3+ at the treatment with simulated acid rain (SAR) in main soil types collected from South China. Results showed that the amounts of base cations increased obviously when the pH value of simulated acid rain was lower than 3.0 or 3.5. Compared with the leaching of K+ and Na+, the leaching of Ca2+ and Mg2+ was affected by the pH value of SAR. Only when the amounts of base cations leached from soils exceeded the cation exchange capacity, the pH value of leaching solutions decreased sharply and the amounts of released Al3+ increased. The H+ buffering mechanisms, which were affected notonly by the pH values of SAR, but also by the types and solid components of soils, were proposed for the main soils studied.     

Aquafluor藻细胞活体分析法在三峡库区次级河流回水区Chla测定中的校准及应用

从三峡库区次级河流大宁河、小江、汤溪河及梅溪河139m回水区中段采集水样,经实验室培养后,用丙酮萃取分光光度法和Aquafluor藻细胞活体分析法测定Chla浓度.通过对Chla萃取值(y)和活体值(x)进行回归分析,得到其回归方程为y=4.15x 2.48,t检验显示回归方程具有线性.在库区次级河流139m回水区富营养化监测中,Chla模拟值与萃取值基本吻合,相对误差＜±7%,故可以采用Chla模拟值对水体富营养化程度进行评价.     

Efficient degradation of organic pollutants by S-NaTaO3/biochar under visible light and the photocatalytic performance of a permonosulfate-based dual-effect catalytic system

Removing large concentrations of organic pollutants from water efficiently and quickly under visible light is essential to developing photocatalytic technology and improving solar energy efficiency. This study used a simple hydrothermal method to prepare a non-metallic, S-doped NaTaO₃ (S-NTO) photocatalyst, which was then loaded onto biochar (BC) to form a S-NTO/BC composite photocatalyst. After uniform loading onto BC, the S-NTO particles transformed from cubic to spherical. The photogenerated electron-hole pair recombination probability of the composite photocatalyst was significantly lower than those of the NTO particles. The light absorption range of the catalyst was effectively widened from 310 nm UV region to visible region. In addition, a dual-effect catalytic system was constructed by introducing peroxymonosulfate (PMS) into the environment of the pollution to be degraded. The Rhodamine B, Methyl Orange, Acid Orange 7, tetracycline, and ciprofloxacin degradation efficiency at 40 mg/L reached 99.6%, 99.2%, 84.5%, 67.1%, and 70.7%, respectively, after irradiation by a 40 W lamps for 90 min. The high-efficiency visible-light catalytic activity of the dual-effect catalytic system was attributed to doping with non-metallic sulfur and loading of catalysts onto BC. The development of this dual-effect catalytic system provides new ideas for quickly and efficiently solving the problem of high-concentration organic pollution in aqueous environments, rationally and fully utilizing solar energy, and expanding the application of photocatalytic technology to practice.     

In-situ-reduced synthesis of cyano group modified g-C3N4/CaCO3 composite with highly enhanced photocatalytic activity for nicotine elimination

Graphite carbon nitride has many excellent properties as a two-dimensional semiconductor material so that it has a wide application prospect in the field of photocatalysis. However, the traditional problems such as high recombination rate of photogenerated carriers limit its application. In this work, we introduce nitrogen deficiency into g-C₃N₄ to solve this problem a simple and safe in-situ reduction method. g-C₃N₄/CaCO₃ was obtained by a simple and safe one-step calcination method with industrial-grade micron particles CaCO₃. Cyano group modification was in-situ reduced during the thermal polymerization process, which would change the internal electronic structure of g-C₃N₄. The successful combination of g-C₃N₄ and CaCO₃ and the introduction of cyanide have been proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometer. The formation of the cyano group, an electron-absorbing group, promotes the effective separation of photogenic electron hole pairs and inhibits the recombination of photogenic carriers. These advantages result in the generation of more •O₂⁻ and ¹O₂ in the catalytic system, which increases the photocatalytic efficiency of nicotine degradation by ten times. Furthermore, the degradation process of nicotine has been studied in this work to provide a basis for the degradation of nicotine organic pollutants in the air.     

清洁的胡椒基T醚生产工艺的研究I,5-丙基-1,3-苯并二氧杂茂的氯甲基化废水的处理

报道了胡椒基丁醚生产中５－丙基－１，３－苯并二氧杂茂的氯甲基化的废水处理，该废水经蒸馏可回收９４％的盐酸，此酸吸收氯化氢后浓度在３６％以上，可再用于氯甲基化反应。蒸馏残液经分油、Ｆｅｎｔｏｎ试剂处理和五次生炭柱吸附后ＣＯＤＣｒ等项指标均可国家二类污染物的一级排放标准。     

Upgrading of organic waste: production of the copolymer poly-3-hydroxybutyrate-co-valerate by Ralstonia eutrophus with organic waste as sole carbon source

Two types of fermented organic waste (trade and industry waste and fruit and vegetable waste) were successfully used as a sole carbon source to produce poly-3-hydroxybutyrate-co-valerate (PHBV) by Ralstonia eutrophus (formerly Alcaligenes eutrophus) via oxygen limitation.The production of PHBV could be optimized by optimizing the oxygen transfer through the fermentor. Thereby, a peak concentration of 1.1 g PHBV per liter cell suspension, 40 w% of cell dry weight, was obtained at an aeration rate of 0.24 mol O₂/h·kg biomass. The yield of PHBV on the fatty acid concentration in the organic waste was 0.16 g polymer/g volatile organic matter. The process obtained, compares well with the commercial production process of PHBV based on glucose.     

县域生态功能区划研究——以桐柏县为例

结合桐柏县的实例,对县域生态功能区划分的原则和方法进行初步探讨.综合利用3S技术对县域生态敏感性和生态服务功能重要性的分析和评价,提出桐柏县生态服务功能区划的初步方案.将桐柏县划分为生态支持区,产品供给区,生态调节区.简要分析了各功能区在桐柏县经济可持续发展中的地位和作用,指出各区协调发展的方向和途征.     

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C_3N_4) modified Bi_4O_5I_2 composite was successfully prepared insitu via the thermal treatment of a g-C_3N_4/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C_3N_4/Bi_4O_5I_2 showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min~(-1),which is 3.2 and 82 times as high as that of Bi_4O_5I_2 and g-C_3N_4,respectively.The g-C_3N_4/Bi_4O_5I_2 was characterized by X-ray powder diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman,X-ray photoelectron spectroscopy(XPS),ultraviolet-visible diffuse reflectance spectra(DRS),electrochemical impedance spectroscopy(EIS) and transient photocurrent response in order to explain the enhanced photoactivity.Results indicated that the decoration with a small amount of g-C_3N_4 influenced the specific surface area only slightly.Nevertheless,the capability for absorbing visible light was improved measurably,which was beneficial to the MO degradation.On top of that,a strong interaction between g-C_3N_4 and Bi_4O_5I_2 was detected.This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation.Thus,the g-C_3N_4/Bi_4O_5I_2 composite presented greater charge separation efficiency and much better photocatalytic performance than Bi_4O_5I_2.Additionally,g-C_3N_4/Bi_4O_5I_2 also presented high stability.·O_2~-and holes were verified to be the main reactive species.     

海水环境下玻璃纤维增强复合材料力学性能演化规律研究

目的 研究海水环境下海流能发电机组叶片用玻璃纤维复合材料力学性能的变化规律.方法 在实验室内通过海水浸泡试验、拉伸试验、弯曲试验以及剪切试验,测定叶片用玻璃纤维树脂基复合材料的吸水特性,以及在人工海水介质中各项力学性能参数的演变规律.结果 随着浸泡时间的增加,玻璃纤维树脂基复合材料吸水率先逐步增大、后趋于稳定,总吸水率约0.075％.抗拉强度呈先降低、后提高、又降低的趋势,抗拉强度最高可超过1100 MPa,最小值约为940 MPa.弹性模量和弯曲强度呈逐渐降低的趋势,弹性模量降幅约9.5％,弯曲强度降幅约为30％.弯曲模量变化起伏不定,变化幅度在15％以内.材料剪切强度呈先增大、后降低的趋势,最小值为189 MPa,较初始值高10 MPa.剪切模量呈先降低、后提高的现象,在浸泡28 d时,剪切模量最小,为16.4 GPa.结论 玻璃纤维增强树脂基复合材料经过长期海水浸泡后,拉伸及抗剪切性能略有降低,但降幅不大,抗弯性能下降明显,需要在叶片结构设计和强度计算时,充分考虑抗弯性能衰减的负面影响.