Air assimilative capacity-based environment friendly siting of new industries--a case study of Kochi region, India

Air pollution has become a matter of grave concern, particularly in mega-cities and urban areas, where the situation is alarming and becoming more and more severe day-by-day and warrants, therefore, careful planning to facilitate future industrial development. Site selection, with the objective of minimizing adverse environmental impacts based on environmental criteria is a vital prerequisite, particularly for air polluting industries. In order to locate any air polluting industry, the assimilative capacity of the region needs to be assessed carefully and planned accordingly, so that the receiving environment is not adversely affected. Assimilative capacity of a region/airshed, widely represented through the ventilation coefficient by many researchers in the past, does not give a clear picture about the amount of emission load that can be assimilated in a given region. The ventilation coefficient, at best, can only present a broad picture about the air pollution dispersion potential (low, medium or high) of the region. A modified approach, which utilizes air quality modelling as a tool to estimate the maximum allowable emission load that a region can assimilate without violating the stipulated standards, has been used for estimating the assimilative capacity of the air environment. Details of this approach have been presented in this paper through a case study carried out for the Kochi region, located in the Kerala State of India. A variety of emission and meteorological scenarios have been considered and critical emission loads have been estimated. This approach shall provide necessary technical guidance to the environmental regulatory authorities as well as to the industries in planning environment friendly industrial development.     

A framework for assessing the impact of land use policy on community exposure to air toxics

Our research focuses on the linkage between land use planning policy and the spatial pattern of exposure to air toxics emissions. Our objective is to develop a modeling framework for assessment of the community health risk implications of land use policy. The modeling framework is not intended to be a regulatory tool for small-scale land use decisions, but a long-range planning tool to assess the community health risk implications of alternative land use scenarios at a regional or subregional scale. This paper describes the development and application of an air toxic source model for generating aggregate emission factors for industrial and commercial zoning districts as a function of permitted uses. To address the uncertainty of estimating air toxics emission rates for planned general land use or zoning districts, the source model uses an emissions probability mass function that weights each incremental permitted land use activity by the likelihood of occurrence. We thus reduce the uncertainty involved in planning for development with no prior knowledge of the specific industries that may locate within the land use district. These air toxics emission factors can then be used to estimate pollutant atmospheric mass flux from land use zoning districts, which can then be input to air dispersion and human health risk assessment models to simulate the spatial pattern of air toxics exposure risk. The model database was constructed using the California Air Toxics Inventory, 1997 US Economic Census, and land assessment records from several California counties. The database contains information on more than 200 air toxics at the 2-digit Standard Industrial Classification (SIC) level. We present a case study to illustrate application of the model. LUAIRTOX, the interactive spreadsheet model that applies our methodology to the California data, is available at http://www2.bren.ucsb.edu/~mwillis/LUAIRTOX.htm.     

Developing the interaction matrix technique as a tool assessing the impact of traffic on air quality

This paper develops a technique which can be used as a preliminary tool for assessing air quality related to urban traffic. It combines a Geographic Information System (GIS) with an interaction matrix-type methodology based on a system analysis approach. The matrix identifies and quantifies interactions between all selected variables involved in a system as well as their interaction with the system as a whole. This matrix is used to determine the weightings to apply to spatial datasets within a GIS to develop a pollution vulnerability map. The focus of the paper is to introduce and assess a more versatile coding of the interaction matrix with respect to previously used coding. A case study is presented in which the modified interaction methodology is applied to data for a busy urban location. The resulting vulnerability map, in terms of pollution vulnerable hot spots, was compared to a pollution map derived from an advanced dispersion model. The interaction matrix technique with GIS can be used as a tool complementary to sophisticated numerical modelling and has potential as an analytical tool to evaluate multidisciplinary systems.     

Environmental Equity and the Role of Public Policy: Experiences in the Rijnmond Region

This Φ Ψ study of environmental equity uses secondary quantitative data to analyze socioeconomic disparities in environmental conditions in the Rijnmond region of the Netherlands. The disparities of selected environmental indicators—exposure to traffic noise (road, rail, and air), NO₂, external safety risks, and the availability of public green space—are analyzed both separately and in combination. Not only exposures to environmental burdens (“bads”) were investigated, but also access to environmental benefits (“goods”). Additionally, we held interviews and reviewed documents to grasp the mechanisms underlying the environmental equity situation, with an emphasis on the role of public policy. Environmental equity is not a priority in public policy for the greater Rotterdam region known as the Rijnmond region, yet environmental standards have been established to provide a minimum environmental quality to all local residents. In general, environmental quality has improved in this region, and the accumulation of negative environmental outcomes (“bads”) has been limited. However, environmental standards for road traffic noise and NO₂ are being exceeded, probably because of the pressure on space and the traffic intensity. We found an association of environmental “bads” with income for rail traffic noise and availability of public green space. In the absence of regulation, positive environmental outcomes (“goods”) are mainly left up to market forces. Consequently, higher-income groups generally have more access to environmental “goods” than lower-income groups.     

Polychlorinated dibenzo-p-dioxins, dibenzofurans, and dioxin-like polychlorinated biphenyls in rice straw smoke and their origins in Japan

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs) contained in the smoke generated from rice straw burning in post-harvest paddy fields in Japan were analyzed to determine their congener profiles. Both the apportionment of toxic equivalent (TEQ) by using indicative congeners and the comparison of the homolog profiles showed that the PCDDs/PCDFs/DL-PCBs present in the rice-straw smoke were greatly influenced by those present as impurities in pentachlorophenol (PCP) and chlornitrofen (CNP, 4-nitrophenyl-2,4,6-trichlorophenyl ether) formulations that had been widely used as herbicides in paddy fields in Japan. Further, in order to investigate the effects of paddy-field soil on the PCDDs/PCDFs/DL-PCBs present in rice-straw smoke, PCDD/PCDF/DL-PCB homolog profiles of rice straw, rice-straw smoke and paddy-field soil were compared. Rice-straw smoke was generated by burning rice straw on a stainless-steel tray in a laboratory. The results suggested that the herbicides-originated PCDDs/PCDFs/DL-PCBs and the atmospheric PCDDs/PCDFs/DL-PCBs contributed predominantly to the presence of PCDDs/PCDFs/DL-PCBs in the rice-straw smoke while the contribution of PCDDs/PCDFs/DL-PCBs formed during rice straw burning was relatively minimal. The major sources of the PCDDs/PCDFs/DL-PCBs found in the rice-straw smoke were attributed primarily to the paddy-field soil adhered to the rice straw surface and secondarily to the air taken by the rice straw. The principal component analysis supported these conclusions. It is concluded that rice straw burning at paddy fields acts as a driving force in the transfer of PCDDs/PCDFs/DL-PCBs from paddy-field soil to the atmosphere.     

Enhancing consultation practices on Air Quality Management in local authorities

Schedule 11 of the Environment Act 1995 underpins the requirement for consultation on air quality issues. The ongoing air quality review and assessment process represents one of the largest locally based science policy and communication initiatives ever undertaken in the UK. This paper outlines the practice of consultation and communication for Air Quality Management (AQM) and reviews the interaction between Environmental Health professionals, as the leading actor in the AQM process and other stakeholders involved in air quality consultation, including the public. Results are presented from a widespread questionnaire survey of English local authorities. Data indicate that the majority of air quality consultation has been carried out with statutory consultees (by sending the review and assessment reports) and the public (via websites and leaflets) in the form of information dissemination.     

杭州主城区大气臭氧对空气污染指数API的影响

利用2004年至2007年空气污染监测数据,比较现行API指数和修正后API指数的差异,分析修正后O3污染的变化状况,研究O3污染的季节变化。结果表明,O3作为一种新的空气污染指标,对修正后API指数的影响很大。与现行API指数相比,4年来修正后API指数的污染率大幅度增加,并且各季节的污染率越来越接近,2007年污染率在25%左右。2007年各季节修正后API指数污染天数中O3污染天数所占百分比分别是春季为52%、夏季91.6%、秋季20.8%、冬季O3,未出现污染。     

White clover clones as a cost-effective indicator of phytotoxic ozone: 10 years of experience from central Italy

Data collected at one site in central Italy using the NC-S/NC-R clover (Trifolium repens) biotype system during 1997-2007 were analysed in order to assess: (a) its performance under Mediterranean conditions; (b) variations of ozone damage linked with meteorological conditions; (c) if critical level approach is a good predictor of ozone risk on vegetation. NC-S dry biomasses were systematically lower than those of NC-R, the mean ratio being 0.7. Relevant relationship between ozone visible injury and cumulated values of AOT40 were also reported. Temperature and number of rainy days were the most important factors associated with ozone presence and, as a consequence, with leaf injury index. Photosynthetic gas exchange properties indicate that NC-S has higher values of stomatal conductance.     

在线分析宁波市北仑区VOCs组成、趋势及来源

利用VOCs在线监测技术，对2010年宁波市北仑区空气内的VOCs的浓度、组成、变化规律及来源进行分析研究。结果表明，在北仑区域内的16种VOCs中，苯、甲苯、二甲苯、乙苯和己烷的比例占到了总数的82．9％，且该5种有机物浓度存在较为典型的季节性变化规律和日变化规律；采用CMD模型法对VOCs的来源进行解析后发现，北仑区域内的VOCs主要来源于汽车尾气、汽油蒸气和石油液化气，而且汽车尾气的贡献值要比一些大城市低得多，且夏季和冬季的成分源贡献率存在明显差异。     

Field application of evaluated methodology for determining 1,2‐dibromoethane,EDB, in ambient air

Abstract

EDB (ethylene dibromide) is of regulatory interest because it has cancer inducing properties and is a causative agent of aspermia. Previously evaluated methodology was used to determine the extent of exposure of workers to EDB in citrus fumigation stations and a warehouse used as a holding site before shipment. The purpose of this effort was to carry out environmental sampling, and to determine the exposure level of workers and related administrative personnel at two citrus fumigation centers and at a warehouse