微波高压络合消解石墨炉原子吸收分光光度法测定环境空气中锑

用有机滤膜采集空气中颗粒物样品,用微波高压络合消解后制成样品溶液。用石墨炉原子吸收分光光度法可确定样品溶液中锑的浓度。该方法具有对有机滤膜和样品消解完全,省时,无损失,灵敏度高,准确度、精密度好等特点。     

塔里木油田环境空气质量状况及评价

根据塔里木油田１９９３－１９９６年环境空气监测数据，对其环境空气质量状况进行了分析和评价。     

液相色谱法测定环境空气中酞酸酯类

制作了半挥发性有机物中流量采样装置,使用超细玻璃纤维滤膜采样,反相液相色谱法测定环境空气中酞酸酯类,并对样品净化方式、目标化合物在气相和颗粒物上的分布规律及采样器的捕集效率进行了试验.方法在0.50 mg/L～50.0 mg/L之间线性关系良好,当浓缩体积为1.0 mL、采样体积为144 m3时,目标化合物的检出限为0.4×10-3 μg/m3～6.0×10-3 μg/m3;当采样体积为6 m3时,检出限为0.008 μg/m3～0.145 μg/m3.     

环境污染纠纷技术仲裁监测方法探讨

以某铝厂环境空气氟化物污染纠纷的技术仲裁监测为实例，总结出了一套环境污染纠纷技术仲裁监测的工作程序和方法，从法律程序、技术路线、质量保证，监测指标体系等方面对环境污染纠纷技术仲裁监测工作如何开展进行了探讨。     

扩散法测定环境空气中的二氧化硫

介绍了利用自制分子扩散式个体采样器 ,监测环境空气中的二氧化硫的方法 ,该方法改 PRA光度法为离子色谱法 ,提高了方法的灵敏度。经实验室性能评价能够满足实验室测试的要求。并经有动力的溶液吸收管法现场对比测试 ,两种测试方法结果一致     

遂宁市城区大气中二氧化硫、二氧化氮和总悬浮颗粒物的污染现状及其成因分析

依据近5年的环境空气监测基础数据，分析评价了遂宁市城区大气中周报监测项目(二氧化硫、二氧化氮、总悬浮颗粒物)的污染现状，并对其变化趋势及其成因进行了系统分析。     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001     

Illinois redesigns its ambient water quality monitoring network

Illinois has been operating an ambient water quality network of almost 600 stations for several years. In 1977 changes in program emphasis toward intensive monitoring, the need for improved procedures and quality control in monitoring operations, and the desire to create a single data base of all Illinois State monitoring data, resulted in a redesign of the ambient monitoring program.A unique cooperative program between the Illinois Environmental Protection Agency and the US Geological Survey provides for their monitoring a portion of the network. The Survey provides flow data at most network stations as well as extensive manpower training, equipment, data processing, and program quality control. Informal agreements with other agencies have permitted a great reduction in the monitoring effort required by the Illinois Environmental Protection Agency.     

A methodological framework for improving air quality monitoring network layout. Applications to environment management

This work aims to provide a methodology framework which allows to improve the performance and efficiency of an air quality monitoring network (AQMN). It requires to be constituted by a minimum and reliable number of measurement sites. Nevertheless, the AQMN efficiency should be assessed over time, as a consequence of the possible emergence of new emission sources of air pollutants, which could lead to variations on their spatial distribution within the target area. PM₁₀ particles data monitored by the Community of Madrid's (Spain) AQMN between 2008 and 2017 were used to develop a methodology to optimize the AQMN performance. The annual spatial distribution of average PM₁₀ levels over the studied period monitored by all current stations vs those more representative was provided by a geographic information system (GIS), and the percentage of similarity between both postulates was quantified using simple linear regression (> 95%). As one innovative tool of this study, the practical application of the proposed methodology was validated using PM₁₀ particles data measured by AQMN during 2007 and 2018, reaching a similitude degree higher than 95%. The influence of temporal variation on the proposed methodological framework was around 20%.The proposed methodology sets criteria for identifying non-redundant stations within AQMN, it is also able to appropriately assess the representativeness of fixed monitoring sites within an AQMN and it complements the guidelines set by European legislation on air pollutants monitoring at fixed stations, which could help to tackle efforts to improve the air quality management.     

Effects of environmental temperature on the thermal runaway of lithium-ion batteries during charging process

Lithium-ion batteries with relatively narrow operating temperature range have provoked concerns regarding the safety of LIBs. In this work, a series of experiments were conducted to explore the thermal runaway (TR) behaviors of charging batteries in a high/low temperature test chamber. The effects of charging rates (0.5 C, 1 C, 2 C, and 3 C), and ambient temperature (2 °C, 32 °C and 56 °C) are comprehensively investigated.The results indicate that the cell exhibited greater thermal hazard at the high charging rate and ambient temperature conditions. As the charging rate increased from 0.5 C to 3 C, more lithium intercalated in the anode prompt the TR triggered in advance, the TR onset temperature decreased from 297.5 °C to 264.7 °C. In addition, the charging time decreased with the elevated ambient temperature, resulting in a relatively higher TR onset temperature and lower maximum temperature, and the average TR critical time declined by 115–143 s. Finally, the TR required less heat accumulation with increasing of charging rate and ambient temperature, and the heat generation of side reaction played a substantial role that accounted for approximately 54%∼63%. These results provide an insight into the charging cell thermal runaway behaviors in complex operation environments and deliver valuable guidance for improving the safety of cell operation.