In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C_3N_4) modified Bi_4O_5I_2 composite was successfully prepared insitu via the thermal treatment of a g-C_3N_4/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C_3N_4/Bi_4O_5I_2 showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min~(-1),which is 3.2 and 82 times as high as that of Bi_4O_5I_2 and g-C_3N_4,respectively.The g-C_3N_4/Bi_4O_5I_2 was characterized by X-ray powder diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman,X-ray photoelectron spectroscopy(XPS),ultraviolet-visible diffuse reflectance spectra(DRS),electrochemical impedance spectroscopy(EIS) and transient photocurrent response in order to explain the enhanced photoactivity.Results indicated that the decoration with a small amount of g-C_3N_4 influenced the specific surface area only slightly.Nevertheless,the capability for absorbing visible light was improved measurably,which was beneficial to the MO degradation.On top of that,a strong interaction between g-C_3N_4 and Bi_4O_5I_2 was detected.This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation.Thus,the g-C_3N_4/Bi_4O_5I_2 composite presented greater charge separation efficiency and much better photocatalytic performance than Bi_4O_5I_2.Additionally,g-C_3N_4/Bi_4O_5I_2 also presented high stability.·O_2~-and holes were verified to be the main reactive species.     

污水生物处理过程中的同步硝化反硝化研究概况

在好氧生物氧化过程中通过控制反应器内 DO浓度、C/N比、污泥负荷的条件下 ,观察到较明显的同步硝化反硝化现象 ,通过控制反应条件 ,可使硝化、反硝化速率都得以同步提高。     

用水基表面活性剂乳液回收废白土中蜡的界面张力研究

通过测定液体与废白土粉末之间的接触角及液体与蜡之间的液液界面张力，对水基表面活性剂乳液的溶剂及配方进行了优选，得到最佳的水基面活性剂乳液的组成为：质量分数０．２％的十二烷基苯磺酸钠＋体积分数为２．５％的乙醇＋体积分数为２５％的混合烃（正己烷＋苯，等体积）＋体积分数为７２．５％的水。实验证明，用该水基表面活性剂乳液处理废白土，蜡的回收率可达８０％，同时不破坏白土的颗粒结构。     

一种新型滑动集电材料的研制及性能研究

利用粉末冶金 /挤压的方法制作了一种新型的Cu C滑动集电材料 ,并对该材料的机械物理、摩擦磨损性能进行了检测 ,结果证明该材料具有较高的抗拉强度、适中的表面硬度、较低的电阻率、优良的摩擦磨损性能 ,是一种较为优良的电力机车滑板材料。其性能测试结果和铁道部标准要求相比 ,优于铁道部标准要求。     

半干法喷射烟气脱硫试验研究

介绍了半干法喷射烟气脱硫试验 ,研究了钙硫比、雾化水量、进口SO2 浓度、湿度等主要因素对脱硫率的影响规律 ,对布袋除尘器的辅助脱硫也进行了研究。结果将有助于改进半干法脱硫技术 ,并为进一步的工业应用提供了参考数据。     

Photodegradation of acetochlor in water and UV photoproducts identified by mass spectrometry

The sunlight photodegradation half-lives of 20 mg/L acetochlor were 151, 154 and 169 days in de-ionized water, river water and paddy water, respectively. When exposed to ultraviolet (UV) light, acetochlor in aqueous solution was rapidly degraded. The half-lives were7.1, 10.1, and 11.5 min in de-ionized water, river water and paddy water, respectively. Photopreduets of acetochlor were identified by gas chromatography/mass spectrometry(GC/MS) and found at least twelve photoproducts resulted from dechlorination with subsequent hydrtrxylation and cyclization processes. The chemical structures of ten photoproducts were presumed on the basis of mass spectrum interpretation and literature data. Photoproducts are identified as 2-ethyl-6-methylaniline; N, N-diethylaniline ; 4, 8-dimethyl-2-oxo- 1,2,3,4- tetrahydroquino-line; 2-oxo-N-(2-ethyl-6-methylphenyl)-N-(ethoxymethyl) acetamide; N-(ethoxymethyl)-2‘-ethyl-6‘-methylformanilide; 1-hydroxyaeetyl-2-ethoxyl-7-ethylind ole; 8-ethyl-l-ethoxymethyl-2-oxo-1, 2, 3, 4-tetrahydroquinoline; 4, 8-dimethyl-l-ethoxymethyl-2-oxo-1, 2, 3, 4-tetrahydroquinoline; 2-hydroxy-2‘-ethyl-6‘-methyl-N-(ethoxymethyl) acetanilide and a compound related to acetochlor. The other two photoproducts were detected by GC/MS although their chemical structure was unknown.     

环境侵害民事诉讼若干问题探讨

随着社会经济发展到一定阶段,人们的物质文化需求与日益脆弱的环境现实必然产生矛盾--即发展与环境的矛盾.而这种矛盾所导致的结果就是环境侵害案件的不断增多,而由于我国长期以来一直是一个以计划经济为主的发展中国家,法制建设不足,只是在近二十五年中立法工作才得以提速、加强.而这当中,对环境保护及环境违法处置方面的立法尤显不足,由此造成目前现实中的环境侵害案件,用传统诉讼制度来解决时,问题和缺陷日益显露.深入研究此类案件的特点,将有利于司法部门正确解决纠纷,切实保护当事人的权利.本文对环境侵害之诉讼要件中的诉讼主体的确定,诉讼请求的根据与范围、证明规则,以及诉讼时效等问题进行了初步探讨.     

浅析地聚合物的发展和研究动态

地聚合物是一类新型的高性能无机聚合物材料，是碱激活胶凝材料中最具前途的一类。由于其特殊的无机缩聚三维氧化物网络结构，使得地聚合物材料在众多方面具有比高分子材料、水泥、陶瓷和金属更高的高温性能和机械性能；另一方面，地聚合物材料制造过程中的能耗和三废排放量都非常低，材料对环境友好并且可以很好地被回收再年利用，是一种可持续发展的“绿色环保材料”。在比较全面地论述地聚合物材料的发展历史、生产工艺的基础上分析目前存在的问题，提出开发地聚合物材料是兼顾社会发展和减轻环境污染问题的一个较理想的对策。     

生态建设中激励问题研究

当前中国经济快速增长很大程度是以过度消耗资源、牺牲环境为代价的.生态环境污染严重影响经济的可持续发展,生态问题制约着和谐社会的构建.生态建设已成为协调经济、社会和生态发展,走可持续发展的唯一出路.当前由于政府主导型生态建设出现众多问题,诸如生态环境脆弱、压力大,法律法规不完善,生态建设资金投入少、投入渠道单一,生态治理工程效益有待继续提高等等.因此,倡导企业、农民、专家、投资者和志愿组织、社会团体等积极参与到生态建设中来,并建立激励机制对各参与者实施相应的激励措施,使他们充分发挥能动性,更快、更好的进行生态建设.