基于可接受安全间距的单车道交通流模拟模型

交通流微观模拟是采用计算机对交通流进行描述及分析的方法。尤其对于复杂的交通流而言,微观模拟具有明显的优势,然而模拟的准确与否,关键在于模型的建立。笔者即是在研究我国单车道交通流特点的基础上,借鉴车道变换理论,基于驾驶员可接受的交通安全间距,分析安全变换车道的各间距之间的关系,阐述了有超车的单车道交通流模拟模型的建立方法     

基于OP-FTIR技术的炼油装置VOCs排放量监测

随着挥发性有机物排污收费政策的逐步实施,快速准确地监测企业VOCs排放量已成为环保部门和企业共同面对的难题。介绍了开路式傅里叶变换红外光谱技术原理及优势,研究了质量通量模式VOCs排放量计算方法,并以300 m×300 m某装置区域为例,完成了现场红外光谱测量、气象数据采集、数据有效性分析和VOCs排放量计算。研究结果表明,开路红外光谱技术极大提高了VOCs排放数据采集效率和准确性,进一步计算得出该装置区域VOCs年排放量平均值为98.7 t,为企业开展VOCs排放量核算提供了参考。     

基于各向异性粒子介电常数张量重构的散射特性研究

目的简化各向异性介质中的光电传播、目标散射识别等问题。方法基于电场强度矢量和电位移矢量的关系,提出将各向异性介质的介电常数张量重构为对角张量通用方法。结果给出了对角张量元素的表达式和对应单位特征矢量,并作了详细的数值计算。得到了单位特征矢量坐标系中电磁场与原坐标系中电磁场的变换关系以及磁导率张量的变换关系;所用方法具有通用性,所得结果具有实用性。结论在各向异性介质研究领域,可实现特征坐标系中的电磁场及介质参数与主坐标系的电磁场与介质参数的相互定量转换。     

基于小波变换与传统时间序列模型的臭氧浓度多步预测

采用最大重叠小波分解与重构方法,将影响O3小时浓度的不同时间尺度的物化过程分离出来,以提高序列的光滑性.同时,选择合适的传统时间序列模型(如ARIMA模型等)来描述不同过程的序列特征,并分别拟合预报.最后,在建模中引入24 h季节项,以实现提前24 h-次性预测未来1d的O3逐时浓度.结果表明,预报的平均相对误差为12.92％,平均绝对误差和均方根误差分别为10.04 μ.g·m-3和13.98μg·m-3,预报值与实测值的相关系数和匹配指数分别为0.96和0.98.随着预测期的延长,预报误差仍处于可接受范围内.该方法同样适用于每日最大O3小时浓度预报,研究结果为发布天气预报式的空气质量预报提供了新思路,便于公众规划出行并减少大气污染暴露.     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.     

Fe2O3 particles as superior catalysts for low temperature selective catalytic reduction of NO with NH3

Fe203 particle catalysts were experimentally studied in the low temperature selective catalytic reduction （SCR） of NO with NH3. The effects of reaction temperature, oxygen concentration, [NH3]/[NO] molar ratio and residence time on SCR activity were studied. It was found that Fe203 catalysts had high activity for the SCR of NO with NH3 in a broad temperature range of 150-270℃, and more than 95% NO conversion was obtained at 180℃ when the molar ratio [NH3]/[NO] = 1, the residence time was 0.48 seconds and 02 volume fraction was 3%. In addition, the effect of SO2 on SCR catalytic activity was also investigated at the temperature of 180℃. The results showed that deactivation of the Fe2O3 particles occurred due to the presence of SO2 and the NO conversion decreased from 99.2% to 58% in 240 min, since SO2 gradually decreased the catalytic activity of the catalysts. In addition, X-ray diffraction, Thermogravimetric analysis and Fourier transform infrared spectroscopy were used to characterize the fresh and deactivated Fe2O3 catalysts. The results showed that the deactivation caused by SO2 was due to the formation of metal sulfates and ammonium sulfates on the catalyst surface during the de-NO reaction, which could cause pore plugging and result in suppression of the catalytic activity.     

浅谈烟尘采样的两种分析验证方案

本文应用两种污染物传递数学模型分析烟尘采样过程,第一个模型假设烟尘经过采样后又经过一段物理运动重新达到平衡,因此得到采样后烟尘浓度和采样器内浓度的数学等式,第二种模型则是在第一种的模型基础之上给出烟尘浓度随,的变化而变化的数学表示式子.     

模拟医疗废物在TG-DTA-FTIR上的热失重特性研究

在热重-差热分析仪上对模拟医疗废物分别在氮气和空气气氛中不同升温速率下加热的热失重行为进行了研究,并对升温速率和不同气氛对其热失重行为的影响进行了探讨.结果表明,随升温速率的提高,模拟医疗废物在2种气氛下热失重时挥发分初析出温度（T_s）向高温方向偏移、失重速率峰值（DTG_max）显著增大;在氮气气氛下,物料热失重时有2个失重峰,前后2个峰的失重率分别为31%和59%左右,在空气气氛下,有3个失重峰,前2个峰失重率分别在44%～59%和31%～46%之间.同时,结合同步傅立叶变换红外光谱仪对各个条件下的气体产物进行了定性分析,并对其中的CO、CO₂、H₂O和CH₄进行了定量分析.实验发现,模拟医疗废物在2种气氛下热失重主要阶段的产物种类相似,都检测到了CO₂、CO、烷烃类、醛类、羧酸、醇类和烯烃的特征吸收峰.并且,结果显示升温速率和气氛条件对CO、CO₂、H₂O和CH₄的生成量都有影响.在热失重的主要阶段,水分含量随加热时间变化曲线上显示1个向下的峰,说明载气中原有水分参与了反应.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.