VARIABILITY IN MEASURED BEDLO AD-TRANSPORT RATES1

ABSTRACT: Variability in bedload-transport rates during constant water discharge is an inherent part of the bedload-transport process. Although this variability has been measured extensively in the laboratory, similar information generally is not available from field measurements. During a four-day period of nearly constant water discharge, four sets of consecutively collected bedload samples, ranging from 43 to 120 samples, were obtained at the same cross channel location using a standard 65-pound Helley-Smith bedload sampler. When the measured transport rates are converted to dimensionless rates and plotted as cumulative frequency distributions, they show good agreement with a theoretical probability distribution function of rates derived for the case of ripples on dunes. The distributions show that during constant water discharge individual measured rates at a fixed point vary from near zero to four times the mean rate, and 60 percent of the sampled rates will be less than the mean. Because of the large variation in transport rates that occurs at every location in the cross section, many observations are required to establish an accurate estimate of the mean rate at any given location.     

IDENTIFICATION OF AQUIFER DISPERSIVITIES: METHODS OF ANALYSIS AND PARAMETER UNCERTAINTY1

ABSTRACT: This paper presents a method for estimating aquifer dispersivities in solute transport models. Sensitivity equations are derived for the calculation of sensitivity coefficients. A modified Gauss-Newton algorithm is used to perform the least-squares minimization. A statistical procedure is outlined to assess reliability of the estimated parameters. The solute transport model is solved by the upstream weighted, multiple cell balance method which combines the concepts of local mass balance and finite element approximations. A one-dimensional solute transport problem in a vertical column system is first used to illustrate the inverse technique. A second example considers the parameter identification problem for three-dimensional solute transport with a unidirectional steady and uniform flow field. The third example solves the parameter identification problem in a three-dimensional, stream-aquifer, solute transport system with steady state flow. Numerical experiments are conducted to study data requirements for parameter identification.     

STATISTICAL METHODS AND SAMPLING DESIGN FOR ESTIMATING STEP TRENDS IN SURFACE-WATER QUALITY1

ABSTRACT: This paper addresses two components of the problem of estimating the magnitude of step trends in surface water quality. The first is finding a robust estimator appropriate to the data characteristics expected in water-quality time series. The Hodges-Lehmann class of estimators is found to be robust in comparison to other nonparametric and moment-based estimators. A seasonal Hodges-Lehmann estimator is developed and shown to have desirable properties. Second, the effectiveness of various sampling strategies are examined using Monte Carlo simulation coupled with application of this estimator. The simulation is based on a large set of total phosphorus data from the Potomac River. To assure that the simulated records have realistic properties, the data are modeled in a multiplicative fashion incorporating flow, hysteresis, seasonal, and noise components. The results demonstrate the importance of balancing the length of the two sampling periods and balancing the number of data values between the two periods. The inefficiency of sampling at frequencies much in excess of 12 samples per year is demonstrated. Rotational sampling designs are discussed, and efficient designs, at least for this river and constituent, are shown to involve more than one year of active sampling at frequencies of about 12 per year.     

Evaluating the effects of spatial monitoring policy on groundwater quality portrayal

What size sample is sufficient for spatially sampling ambient groundwater quality? Water quality data are only as spatially accurate as the geographic sampling strategies used to collect them. This research used sequential sampling and regression analysis to evaluate groundwater quality spatial sampling policy changes proposed by California's Department of Water Resources. Iterative or sequential sampling of a hypothetical groundwater basin's water quality produced data sets from sample sizes ranging from 2.8% to 95% coverage of available point sample sites. Contour maps based on these sample data sets were compared to an original (control), mapped hypothetical data set, to determine at which point map information content and pattern portrayal are not improved by increasing sample sizes. Comparing series of contour maps of ground water quality concentration is a common means of evaluating the geographic extent of groundwater quality change. Comparisons included visual inspection of contout maps and statistical tests on digital versions of these map files, including correlation and regression products. This research demonstrated that, down to about 15% sample site coverage, there is no difference between contour maps produced from the different sampling strategies and the contout map of the original data set.     

A FIELD TECHNIQUE FOR WEIGHING BEDLOAD SAMPLES1

ABSTRACT: A technique for weighing bedload samples that was developed for laboratory use has been modified for field application. The technique involves determining the submerged weight of bedload samples as they are collected. The submerged weights are converted to dry weights from a knowledge of the specific gravity of the bedload material. The technique makes bedload transport data available immediately and eliminates costly and time-consuming steps involved with saving samples for laboratory analysis. Only samples designated for particle-size or other lab analyses need to be saved.     

Testing hypotheses about management to enhance habitat for feeding birds in a freshwater wetland

The level of water was manipulated in a freshwater wetland, with the aim of enhancing abundances of benthic animals and, ultimately, improving habitat for feeding birds (Japanese Snipe, Gallinago hardwickii). We tested whether these actions had the predicted and desired effects on benthic animals, by contrasting changes in two managed locations to one control location which was left unmanipulated. The number of taxa and abundances of chironomids decreased strongly and significantly in the manipulated locations, while the abundance of oligochaetes appeared to vary in a seasonal manner. Temporal variability of the structure and composition of assemblages was also increased in manipulated locations. Such effects have previously been suggested to indicate stress in benthic assemblages. Therefore, in contrast to what was predicted, managerial actions made benthic fauna less abundant and thus, less suitable as habitat for feeding birds. Several general lessons can be learned from these results. (1) Effects of managerial actions like these are difficult to predict a priori and can only be reliably evaluated with an experimental framework. (2) Because abundances of animals vary naturally, evaluations of managerial actions must include appropriate spatial replication. (3) Sampling at hierarchical temporal scales is important, because abundances of animals may vary in an unpredictable manner at short temporal scales and because changes in temporal variability may be a symptom of stress. (4) Combined use of uni- and multivariate techniques provides a comprehensive set of tools to assess the effects of restoration and creation of new habitats. Finally, these results emphasise the need for clear predictions about desired outcomes and specific experimental plans about how to test whether the desired results were achieved, before managerial actions are taken. Although this is often very difficult to achieve in real situations, it is necessary for practices of management to evolve on the basis of sound empirical experience.     

Mapping Three‐Dimensional Water‐Quality Data in the Chesapeake Bay Using Geostatistics1

Abstract:  Data interpretation and visualization software tools with geostatistical capabilities were adapted, customized, and tested to assist the Chesapeake Bay Program in improving its water‐quality modeling protocols. Tools were required to interpolate, map, and visualize three‐dimensional (3D) water‐quality data, with the capability to determine estimation errors. Components of the software, originally developed for ground‐water modeling, were customized for application in estuaries. Additional software components were developed for retrieval, and for pre‐ and post‐ processing of data. The Chesapeake Bay Program uses the 3D mapped data for input to the Bay water‐quality model that projects the future health of the Bay and its tidal tributary system. In determining water‐quality attainment criteria, 3D kriging estimation errors are needed as a statistical measure of uncertainty. Furthermore, given the high cost of installing and operating new monitoring stations, geostatistical techniques can assist the Chesapeake Bay Program in the identification of suitable data collection locations. Following the evaluation, selection, and development of the software components phase, 3D ordinary kriging techniques with directional semi‐variograms to account for anisotropy were successfully demonstrated for mapping 3D fixed station water‐quality data, such as dissolved oxygen and salinity. Additionally, an improved delineation tool was implemented to simulate the upper and lower pycnocline boundary surfaces allowing the segregation of the interpolated 3D data into three separate zones for a better characterization of the pycnocline layer.     

Benzene Exposure Assessment at Indoor, Outdoor and Personal Levels. The French Contribution to the Life MACBETH Programme

Many VOC represent hazards to human health through chronic exposure. Recent European and world-wide legislation proposes limit values for ambient concentrations of these compounds. However, very little experimental data exists for true population exposure. In 1996, the European MACBETH initiative set out to measure population exposure to benzene in six European cities. This study details the French contribution to this program. Six campaigns were carried out, each comprising measurements at 100 outdoor sites and the participation of 50 non-smoking volunteers who wore personal samplers and had passive monitors installed in their homes. Iso-concentration maps were drawn for each campaign and the results showed that outdoor concentrations were significantly lower than indoors. Almost 75% of the volunteers were exposed to mean concentrations higher than the limit value of 5µgm³. It is demonstrated that personal exposure levels cannot be deduced simply by combining indoor and outdoor background concentrations. It is also shown that there is need for better knowledge of the contributions to overall exposure of outdoor microenvironments and the authors hope that future European directives will take this into account.     

Mobile passive samplers: concept for a novel mode of exposure

Integrative passive sampling with devices such as semipermeable membrane devices generally relies on rigs for month-long static exposures in water. We evaluate here whether mobile exposures of passive samplers can provide reliable estimates of dissolved contaminant concentrations. Mobile exposures were obtained by towing samplers fastened to the end of a benthic trawl net. Significant and reproducible absorption of polycyclic aromatic hydrocarbons during 5 h-long deployments was made possible by high sampling rates resulting from high water turbulences during towing at 1.2-1.5 knots. Sampling rates (72-215 L d⁻¹) estimated from the dissipation of performance reference compounds were supported by in situ calibration with samplers exposed for a 30 days in the vicinity of the test site. Higher fluoranthene and pyrene absorption in samplers exposed to the trawling-induced sediment plume could be attributed to desorption from re-suspended sediments. This mode of exposure has the potential to be used in monitoring programmes.