芬顿试剂和湿式过氧化氢氧化法处理乳化液废水研究

研究了常温下芬顿试剂氧化乳化液废水的特性,当进水COD为50540mg·L-1,常温下芬顿试剂氧化的最佳条件为H2O2/COD的质量浓度比为2.0,Fe2 /COD的质量浓度比为0.075时,其COD去除约91%;常温下芬顿试剂氧化乳化液废水时存在明显的诱导期,用表观一级模型分别解释了快速和慢速的反应过程.另外,进一步研究了以H2O2替代部分或全部空气即湿式过氧化氢氧化工艺的氧化能力,湿式双氧水氧化可显著降低亚铁投量(Fe2 投量为50mg·L-1),150℃时COD去除率为82.4%;以少量的双氧水(H2O2/COD=0.05)为引发剂,在120℃下COD去除率达52.0%,催化效果显著.     

新型杂环三氮烯类光度试剂与镍的显色体系研究

光度法检测微量镍发展的核心是制备高灵敏的显色剂,而杂环三氮烯类试剂由于其显色反应的灵敏度高、选择性好,是热点研究方向。本文以新合成的1-(偶氮苯基)-3-(3-硝基-2-吡啶)-三氮烯(简称AB-NPT)为显色剂,研究了它与镍的高灵敏显色体系,结果表明:在pH值为10.8~11.6范围内Na2B4O7-NaOH的缓冲溶液中,ABNPT在非离子表面活性剂Tween-100存在下与镍形成红色稳定的配合物,其最大吸收波长为535 nm。该显色体系大大提高了测定方法的选择性和抗干扰性,优于其它光度法测镍。采用此法用于矿样中微量镍的测定,结果令人满意,有较强的应用背景和社会效益。     

萃取法处理萤光废水

采用萃取法处理萤光废水，最佳萃取工艺条件如下：ｐＨ为１，废水：萃取剂：稀释剂为２０：２：５。在此工艺条件下，萤光废水ＣＯＤ去除率可达９１％－９８％，色度去除率达９９．８％。萃取剂可再生回用，在萃取相中按萃取剂（包括络合物）的量加入等体积的浓度为２０％的ＮａＯＨ溶液，在９５－１０５℃加热回流５－１０ｍｉｎ，即可使萃取剂得到再生。     

焦粉成型技术

冶金、化工、电石生产企业 ,因生产工艺要求需要将大块的焦炭破碎成一定粒度的块焦 ,破碎过程要产生2 0 %— 2 5 %的焦粉。本文针对目前工业废弃焦粉再利用问题 ,通过深入调查 ,反复试验 ,取得了很好的效果。为冶金、化工、电石生产企业废弃焦粉成型再利用找到一条切实可行的方法     

钢渣脱除烧结烟气中二氧化硫的实验研究

通过对钢渣的分析，确定了其作为脱硫剂的可能性。从钢渣在不同操作条件下脱硫的实验研究看，钢渣能有效地脱除烟气中的SO2，在湿润状态、低流速条件下，微细钢渣的脱硫能力较强，钢渣作为脱硫剂使用将具有良好的经济效益和环境效益。     

Removal of organophosphorus pesticides from water by electrogenerated Fenton's reagent

Aqueous solutions of organophosphorus pesticides were completely mineralized via in-situ generated hydroxyl radicals (HO^·) by the Electro-Fenton process. Formation of Fenton's reagent (H₂O₂, Fe²⁺) was carried out by simultaneous reduction of O₂ and Fe³⁺ on carbon cathode in acidic medium. The electrochemistry combined with Fenton's reagent provides an excellent way to continuously produce the hydroxyl radical, a powerful oxidant. We demonstrate the efficiency of the Electro-Fenton process to degrade three organophosphorus insecticides: malathion, parathion ethyl and tetra-ethyl-pyrophosphate (TEPP). Degradation kinetics and removals of chemical oxygen demand (COD) have been investigated. Here we show that the mineralization efficiency was over 80% for three organophosphorus pesticides.     

AN防御蜡梅酸致损伤最佳条件选择

本文以蜡梅光合速率、叶绿素含量、质膜透性为生理指标，研究了ＡＮ对酸雨引起蜡梅损伤的防御作用与最佳作用条件，实验结果表明，以酸雨处理前２４ｈ处理后４８ｈ时间内，喷施１００ｐｐｍＡＮ３次的防御效应最佳。     

碱性条件下日光/FeEDTA/H2O2降解2,4-二氯苯酚的研究

采用日光/FeEDTA/H2O2体系降解2,4-二氯苯酚废水,探讨了pH值,H2O2,FeEDTA以及2,4-二氯苯酚初始浓度对2,4-二氯苯酚去除率以及CODCr去除率的影响,发现该体系可在较宽的pH范围(pH=2-11)降解2,4-二氯苯酚.碱性条件下(pH=9)对250mg·l-1的2,4-二氯苯酚废水,最佳处理条件为:[H2O2]=30mmol·l-1,[FeEDTA]=0.5mmol·l-1,此条件下,反应2h后,2,4-二氯苯酚的去除率高达99%,CODCr去除率达91%.另外,通过对传统Fenton,FeEDTA,草酸铁以及柠檬酸铁四种Fenton体系的对比研究,发现FeEDTA体系在碱性条件下处理2,4-二氯苯酚废水具有明显的优势.     

Fenton试剂对孔雀绿废水的脱色处理研究

对Fenton试剂(过氧化氢与催化剂亚铁离子构成的氧化体系)氧化孔雀绿染料褪色的条件进行了研究,运用条件变化前后吸光度变化的方法,计算孔雀绿染料的脱色率,考察了过氧化氢、孔雀绿、亚铁离子的用量比例以及溶液pH值的大小、反应温度和反应时间对孔雀绿废水脱色率的影响.得出如下结论:在pH为3.0,过氧化氢浓度为4.87毫摩尔每升,亚铁离子浓度为0.12毫摩尔每升,孔雀绿浓度为12毫克每升比例条件下,30℃反应0.5小时以上,孔雀绿废水的脱色率达到99.7％.用该方法处理孔雀绿废水,操作简单、快速、消耗低、无二次污染.     

Recent trends in the decomposition of chlorinated aromatic hydrocarbons by ultrasound irradiation and Fenton's reagent

Over the past few years, a large number of studies have been conducted on the use of ultrasound for decomposition of harmful organic pollutants, particularly chlorinated aromatic hydrocarbons (CAH) in wastewater. The published reports cover a variety of applications, including both ultrasonic treatment alone and in combination with other methods, e.g., advanced chemical oxidation processes. This article presents a review of recent work on ultrasonic-based methods of CAH decomposition, with emphasis on the applications of ultrasound alone and in combination with Fenton's reagent, as attractive advanced oxidation systems. In the first part of this review, the basic principles of sonochemical treatment are presented, followed by a review of the applications of ultrasound alone for CAH degradation. In the second part, the mechanisms of CAH degradation with Fenton's reagent and its application for CAH degradation are summarized. In the final part, studies on the applications of ultrasound together with Fenton's reagent are reviewed. The reported results suggest that a combination of ultrasound and Fenton's reagent is more attractive for practical application than the use of either method separately. Further studies, however, are required in this area because the reaction mechanism and the relationship between the reaction rates and process parameters for such a combined process are not yet well established.