应用地磁场的弹体飞行姿态测量方法研究

常规弹药的简易制导化是常规弹药改造的一个重要途径,是目前研究的热点之一,可以在低成本下大大提高常规弹药的精度,弹道修正弹是其中的一个重要发展方向,而弹体姿态实时测量是其中的一项关键技术。介绍了弹体姿态测量中基于地磁场的姿态测量方法,将其分为组合姿态测量和单矢量测量,并对测量方法做出了分析,阐述了应用地磁场的姿态测量的重要意义。     

原子吸收分光光度法测定水中铅的不确定度评定

对GB/T 7475-1987《水质铜、铅、锌、镉的测定》〔1〕原子吸收分光光度法测定水中铅的测量不确定度进行了评定。通过测量重复性、滴定管、移液管、标准溶液浓度等影响测量结果的不确定度分量的分析和量化,求得水中铅测定结果的相对合成标准不确定度。     

环境地表γ计量率、工频电磁场和射频电场监测实验结果对比分析研究

本文通过两实验室针对环境地表γ计量率、工频电磁场和射频电场仪器对比实验,并对结果进行了统计检验。分析结果表明,两者监测数据无显著差异。     

建筑陶瓷碳计量与优化模型研究

采用投入产出分析方法和目标规划方法,以某建陶企业为代表,建立了建筑陶瓷产业投入产出模型及低碳优化模型,利用投入产出模型计量和预估了建筑陶瓷产业关键环节碳排放和产品碳足迹;应用低碳优化模型对建筑陶瓷企业的产品计划进行了低碳优化.结果表明,建筑陶瓷企业年二氧化碳排放量达182 543.9 t,单位产品碳排放量多于国外先进水平10%以上;影响建筑陶瓷产业二氧化碳排放的关键环节为烧成和喷雾干燥过程,烧成和喷雾干燥过程排放的二氧化碳占总排放的80%以上;3种建筑陶瓷产品中,坯砖、抛光砖、釉面砖的万平米产量碳足迹依次为150.2、168.0、159.6 t.建筑陶瓷企业经低碳模型优化后可以在保证同样利润的同时降低5.4%的碳排放,也可以在保证碳排放相同的条件下使利润提高5.6%.     

Assessing field vulnerability to phosphorus loss in Beijing agricultural area using Revised Field Phosphorus Ranking Scheme

Guanting Reservoir,one of the drinking water supply sources of Beijing,suffers from water eutrophication.It is mainly supplied by Guishui River.Thus,to investigate the reasons of phosphorus(P)loss and improve the P management strategies in Guishui River watershed are important for the safety of drinking water in this region.In this study,a Revised Field P Ranking Scheme(PRS)was developed to reflect the field vulnerability of P loss at the field scale based on the Field PRS.In this new scheme,six factors are included, and each one was assigned a relative weight and a determination method.The affecting factors were classified into transport factors and source factors,and,the standards of environmental quality on surface water and soil erosion classification and degradation of the China were used in this scheme.By the new scheme,thirty-four fields in the Guishui River were categorized as"low","medium"or"high"potential for P loss into the runoff.The results showed that the P loss risks of orchard and vegetable fields were higher than that of corn and soybean fields.The source factors were the main factors to affect P loss from the study area.In the study area,controlling P input and improving P usage efficiency are critical to decrease P loss.Based on the results,it was suggested that more attention should be paid on the fields of vegetable and orchard since they have extremely high usage rate of P and high soil test of E Compared with P surplus by field measurements,the Revised Field PRS was more suitable for reflecting the characteristics of fields,and had higher potential capacity to identify critical source areas of P loss than PRS.     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

Sources and distribution of polycyclic aromatic hydrocarbons in sediments from the Spanish northern continental shelf. Assessment of spatial and temporal trends

The distribution of polycyclic aromatic hydrocarbons was determined in surface sediments collected at 36 stations along the Spanish Northern continental shelf in March and September 2003, and February 2005. Concentrations of PAHs (Σ13 parent components) were in the range of 22-47528 μg/kg dw, the highest values corresponding to coastal urban-industrial hotspots and decreasing offshore. Sediment quality guidelines (SQGs) showed that concentrations of total PAHs were below the threshold effect level (TEC) in 27 stations (81%) and above in 7, two of which (Gijon and Bilbao) were above the probable effect concentration (PEC). The detailed study of diagnostic ratios suggested a rather uniform mixture of petrogenic and pyrolytic PAH sources along the continental shelf, with a slight decrease of the latter moving westwards and offshore. In order to assess the incidence of sediment sampling on the variability of the results, selected stations were also monitored in February and September 2004 and September 2005. The average field variance of the values obtained for each station was 31% that decreased to 23% when the values were normalized to TOC.     

Influence of temporally variable groundwater flow conditions on point measurements and contaminant mass flux estimations

Monitoring of contaminant concentrations, e.g., for the estimation of mass discharge or contaminant degradation rates, often is based on point measurements at observation wells. In addition to the problem, that point measurements may not be spatially representative, a further complication may arise due to the temporal dynamics of groundwater flow, which may cause a concentration measurement to be not temporally representative. This paper presents results from a numerical modeling study focusing on temporal variations of the groundwater flow direction. “Measurements” are obtained from point information representing observation wells installed along control planes using different well frequencies and configurations. Results of the scenario simulations show that temporally variable flow conditions can lead to significant temporal fluctuations of the concentration and thus are a substantial source of uncertainty for point measurements. Temporal variation of point concentration measurements may be as high as the average concentration determined, especially near the plume fringe, even when assuming a homogeneous distribution of the hydraulic conductivity. If a heterogeneous hydraulic conductivity field is present, the concentration variability due to a fluctuating groundwater flow direction varies significantly within the control plane and between the different realizations. Determination of contaminant mass fluxes is also influenced by the temporal variability of the concentration measurement, especially for large spacings of the observation wells. Passive dosimeter sampling is found to be appropriate for evaluating the stationarity of contaminant plumes as well as for estimating average concentrations over time when the plume has fully developed. Representative sampling has to be performed over several periods of groundwater flow fluctuation. For the determination of mass fluxes at heterogeneous sites, however, local fluxes, which may vary considerably along a control plane, have to be accounted for. Here, dosimeter sampling in combination with time integrated local water flux measurements can improve mass flux estimates under dynamic flow conditions.     

一种室外声屏障过渡区域绕射衰减测量方法

提出了一种声屏障声影区与声亮区过渡区域的绕射衰减室外测量方法。方法采用5ms的正弦波作为测试信号,利用声波到达时间的差异有效地排除地面反射和有限长声屏障两侧绕射的影响,并通过背景噪声频谱分析选取测试声以及对接受信号FIR滤波以最大限度降低背景噪声的影响,同时考虑了气象条件变化导致的大气衰减修正。为进一步验证方法有效性,选取直立声屏障作为试验案例。结果表明,与室内全消声室试验结果、几何绕射理论结果接近,试验精度高。     

液相吸收-高效液相色谱法测量气相OH方法的建立

利用水杨酸溶液相OH自由基，生成的荧光产物2，5－二羟苯甲酸用高效液相色谱法分离测定，推算得到气相OH浓度，根据此原理在实验室条件下，建立了气相OH自由基的测定方法，并利用气相OH标准发生源确定了最优实验条件，得到了气相OH浓度与荣光响应关系。由相吸收－高效液相色谱法测定的浓度与标准OH气流中的理论浓度比较一致。