火电厂脱硝的尿素制氨技术概述

选择性催化还原法（简称SCR）脱硝用还原剂氨气的制备原料主要有液氨、氨水及尿素三种。由于液氨工艺系统简单,运输、投资、运行成本较低,在目前的工程中已广泛应用,但存在的缺点是对系统的安全性要求较高。根据《危险化学品重大危险源辨识标准》（GB18218—2009）,液氨储量超过10吨视为重大危险源,因此,某些特殊地区（如北京、广州等地）要求还原剂制备系统采用安全性要求较低的尿素工艺。尿素工艺又分为热解法和水解法制氨,本文分别说明了两种工艺的技术原理、工艺流程。     

武钢七号焦炉推焦烟尘的治理

针对武钢7~#焦炉存在的污染问题,进行了治理改造,采用热浮力罩除尘车,使集尘、除尘、生产于一体,运行后使除尘系统烟气净化效率得到提高,各种污染物都得到了降低。     

Damage to offshore oil and gas facilities following hurricanes Katrina and Rita: An overview

Hurricanes Katrina and Rita hit the centre of the American petrochemical industry, shutting down eight refineries, hundreds of oil-drilling and production platforms, and many other industrial facilities. Furthermore, it triggered unprecedented numbers of hazardous-materials releases from industrial facilities and storage terminals onshore, as well as from oil and gas production facilities offshore in the Gulf of Mexico (GoM). In this paper, we analyse the damage caused by the two hurricanes on the offshore oil and gas industry. Hurricanes Katrina and Rita caused the largest number of destroyed and damaged platforms and pipelines, and the highest number of mobile offshore drilling units set adrift in the history of GoM operations. Following the hurricanes, changes have been proposed to operating and emergency procedures, maintenance requirements, and design practices including mooring practices for mobile offshore drilling units.     

不同条件下高炉渣吸附水中无机磷的研究

高炉渣(BFS)是在冶炼生铁过程中产生的固体废弃物,开展高炉渣的资源化研究具有重要意义.为了对水淬高炉渣净化含磷污水的应用提供理论依据,采取等温吸附的实验方法,比较了不同水淬炉渣的吸附磷效果,研究了不同pH和不同温度下水淬炉渣吸附磷的特点,结果如下:利用Langmuir等温吸附方程炉渣吸附磷的过程进行拟合,其相关系数均能达到显著水平.炉渣的碱度越高,吸附磷的效果越好;炉渣对磷的吸附能力随溶液pH的增加而降低,且初始为酸性(pH=2、4)的溶液在吸附达到平衡后pH有所上升,而初始为碱性的溶液(pH=10、12)在吸附达到平衡后pH有所下降;炉渣对磷的吸附是一个自发放热过程.     

微波-混凝处理高炉煤气洗涤水的实验研究

本文探索了微波作为辅助手段处理高炉煤气洗涤水过程中,微波辐射功率、微波辐射时间、聚合氯化铝(PAC)加入量、磷酸加入量对高炉煤气洗涤废水处理效果的影响。结果表明,微波和PAC混凝联用处理高炉煤气洗涤废水具有作用时间短、聚沉能力强等特点,可以有效去除废水中悬浮物,降低硬度及浊度。     

Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag (BOF-slag) was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial pH, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant (k_obs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial pH, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage. A linear dependence of k_obs on total removed phosphorus (TRP) was established with k_obs = (3.51 ± 0.11) × 10^− 4 × TRP. Finally, it was suggested that the Langmuir–Rideal (L–R) or Langmuir–Hinshelwood (L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag(BOF-slag)was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial p H, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant(kobs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial p H, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage.A linear dependence of kobson total removed phosphorus(TRP) was established with kobs=(3.51 ± 0.11) × 10- 4× TRP. Finally, it was suggested that the Langmuir–Rideal(L–R)or Langmuir–Hinshelwood(L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.     

焙烧炉筒体结构强度有限元分析

对焙烧炉筒体结构进行有限元建模仿真,考虑热应力、压力和重力对筒体结构受力的影响,计算了焙烧炉关键部位的蠕变疲劳寿命,同时探究进气温度、保温层及对流系数等参数的影响。结果表明:热应力是影响结构强度的关键因素;焙烧炉筒体在许用蠕变变形量为5%的情况下,其使用寿命超过设计寿命;在筒体加热过渡段铺设保温层,降低与外界空气对流和提高进气温度,有利于降低筒体应力。     

聚合反应时间对聚酰亚胺基碳膜结构和性能的影响研究

目的 系统研究前驱体聚合反应时间对PI膜及其碳化、石墨化后薄膜结构和性能的影响规律。方法 通过调整聚合合成聚酰胺酸(PAA)溶液过程中的反应时间,制备石墨膜前驱体聚酰亚胺(PI)原膜,将不同工艺条件下制得的PI膜进行碳化、石墨化处理,得到高导热率石墨膜。利用扫描电镜、红外光谱、拉曼光谱仪和LFA激光闪射仪对制备的PI膜、碳化膜及石墨膜的微观结构和热导率进行检测。结果 随聚合反应时间的延长,PI膜酰亚胺化程度和石墨膜的石墨化程度及导热性能先增高、后降低。反应时间为3 h时,制得的石墨膜结构致密,石墨片层取向性好,导热性能最好,热导率可达765.2 W/(m.K)。结论 PI膜前驱体聚合反应时间显著影响PI膜酰亚胺化的程度和有序度,进而影响石墨膜的定向性和导热性能。