浅析报废汽车拆解厂废水循环处理技术的应用现状

报废汽车的回收拆解处理在我国已经逐渐兴起，但由于该产业尚处于发展初期，环保技术手段和可持续性发展意识还不够，因此在回收拆解过程中会产生大量的废水和其他污液。针对某汽车回收拆解厂的废水特性进行实验研究，形成“电荷凝集过滤一活性炭吸附”组合工艺，对报废汽车回收拆解企业的废水处理提供了一定的参考价值。     

地面水中叶枯灵的高效液相色谱测定

本文采用反相高效液相色谱法，在质控条件下，对河水，塘水两种地面水中叶枯灵的检验方法进行了测试，用Shimapck ODS柱为分析柱，以甲醇：水＝50：50为流动相，并用冰醋酸调PH至4－5，紫外检测波长281nm，两种水样的平均回收率分别为91．7－96．3％，90－95．8％，相对标准偏差为4．3％，最低检出限为0．0261mg/l，为地面水中叶枯灵卫生标准的实施提供了简便，灵敏，正确的配套测试手段。     

Preferred surface microscopic geometric features on floors as potential interventions for slip and fall accidents on liquid contaminated surfaces

PROBLEM: Surface roughness affects friction, so selection of floor surfaces with certain roughness characteristics could potentially reduce slip and fall accidents. This article summarizes the preferred surface microscopic geometric features that could increase friction on surfaces covered with liquid contaminants. METHOD: Three types of surface features, represented by the average of the maximum height above the mean line in each cut-off length (R(pm)), the arithmetical average of surface slope (Delta(a)), and the kernel roughness depth (R(k)), are identified as preferred surface microscopic geometric features for a higher friction. The proper settings on the profilometers (instruments used to measure surface roughness) for optimizing these surface parameters are specified. The friction mechanisms involved reveal why these features are more desirable. RESULTS: Although surface roughness is important in determining slipperiness, there is still insufficient information to establish a safety criterion based on roughness; however, the method presented in this paper can readily provide a relative comparison. IMPACT ON INDUSTRY: The summary presented will help safety professionals properly select new floor surfaces or assess existing floors to reduce slip and fall accidents.     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.     

耦合装药中扩容半径的理论计算

根据扩容机理,建立了扩容爆破的物理模型,并且根据动量守恒定律得到了不同条件下最终炮孔挤压区域的半径公式.利用这些公式结合炸药和岩石的特性,以及装药参数得到了扩容结果.理论计算结果与试验数据相吻合.这些结果将有助于爆破扩容理论的完善以及该技术发展和推广应用.     

EFFLUENT FEES,AN ALTERNATIVE SYSTEM FOR ACHIEVING WATER QUALITY: A CASE STUDY1

This paper reports the findings of a case study of the relative costs of a uniform standards system and an effluent fee system of water quality control. A 30-mile stretch of the Black Warrior River in Alabama is considered. The analysis demonstrates that the dischargers could reduce total pollution abatement costs by 33 percent under the suggested effluent fee system.     

Monitoring and Assessment of Persistent Organochlorine Residues in Sediments from the Daliaohe River Watershed, Northeast of China

Surface sediment samples from 12 sites of the three selected rivers in Daliaohe River watershed (Hunhe River, Taizihe River and Daliaohe River) were analyzed with the objective of establishing sources and hazard of the organochlorinae pesticides (OCPs) and polychlorinated biphenyl (PCBs) in surface sediments. The total concentrations of OCPs varied from 3.06 to 23.24 ng g⁻¹. ∑HCH (α-HCH, β-HCH, δ-HCH, γ-HCH), ∑DDT (p, p′-DDE, p, p′-DDD, o, p′-DDT, p, p′-DDT) and ∑Cyclodiene (Heptachlor, Aldrin, Heptachlor epoxide, Dieldrin, Endrin) ranged from 1.86 to 21.48, 0.5 to 2.81 and 0.56 to 1.53 ng g⁻¹, respectively. Results of OCPs also illustrate that the most dominant pollutants among the OCPs was ∑HCH, and γ-HCH was the most dominant isomer in HCH, which was evidence of recent input of lindane. It possibly came from the runoff of polluted soils and long-scale transportation. Total PCB concentrations ranged between 1.88 and 16.88 ng g⁻¹. The peak concentrations of PCBs were found in sediments from station T5 and D3, which are in the vicinity of industrial areas and ferry, respectively. These data show a moderate level of OCPs and PCBs contaminations compared to that in other countries.     

聚能药包在岩石控制爆破技术中的应用研究

聚能爆破技术是岩石控制爆破技术中有待开发的领域。根据爆炸力学、岩石断裂力学理论,从当前控制爆破面临的问题入手,对线性聚能药包(Linear shaped charge)在岩石定向断裂爆破中裂纹的产生、扩展以及主要爆破参数进行了分析研究,并利用自制线性聚能药包在巷道掘进中进行了试验。试验结果是聚能药包形成的巷道轮廓外爆震裂隙不明显,巷道断面平整,凹凸量不超过50mm,眼痕率高达96%以上,经济和社会效益明显。这些均表明聚能爆破是一种理想的定向断裂控制爆破技术。     

Impacts of Surface Gold Mining on Land Use Systems in Western Ghana

Land use conflicts are becoming increasingly apparent from local to global scales. Surface gold mining is an extreme source of such a conflict, but mining impacts on local livelihoods often remain unclear. Our goal here was to assess land cover change due to gold surface mining in Western Ghana, one of the world’s leading gold mining regions, and to study how these changes affected land use systems. We used Landsat satellite images from 1986–2002 to map land cover change and field interviews with farmers to understand the livelihood implications of mining-related land cover change. Our results showed that surface mining resulted in deforestation (58%), a substantial loss of farmland (45%) within mining concessions, and widespread spill-over effects as relocated farmers expand farmland into forests. This points to rapidly eroding livelihood foundations, suggesting that the environmental and social costs of Ghana’s gold boom may be much higher than previously thought.     

Regulation (EC) No. 1107/2009 and upcoming challenges for exposure assessment of plant protection products--Harmonisation or national modelling approaches?

In the new European Pesticide Regulation (EC) No. 1107/2009, the harmonisation of approaches for estimation of the environmental exposure of pesticides is considered a major goal. Several member states currently require their own models for the calculation of predicted environmental concentrations (PEC) in surface water. The variety of methods makes risk evaluations rather time-consuming for both notifiers and evaluating authorities. In the present study we compare surface water concentrations of 19 compounds using EU and country-specific models and risk assessment approaches to evaluate to which extent the resulting estimated exposure concentrations differ. Our results show that EU and country specific approaches and the resulting surface water concentrations differ considerably regarding basic model assumptions and assessment methods. The results indicate that the aimed harmonisation of risk assessment approaches within the EU will be difficult based on current models. New scenarios may help to achieve a harmonisation taking country-specific features into account.