Biodegradation of 2-methylquinoline by Enterobacter aerogenes TJ-D isolated from activated sludge

Bacterial strain Enterobacter aerogenes TJ-D capable of utilizing 2-methylquinoline as the sole carbon and energy source was isolated from acclimated activated sludge under denitrifying conditions. The ability to degrade 2-methylquinoline by E. aerogenes TJ-D was investigated under denitrifying conditions. Under optimal conditions of temperature (35℃) and initial pH 7, 2-methylquinoline of 100 mg/L was degraded within 176 hr. The degradation of 2-methylquinoline by E. aerogenes TJ-D could be well described by the Haldane model (R² > 0.91). During the degradation period of 2-methylquinoline (initial concentration 100 mg/L), nitrate was almost completely consumed (the removal efficiency was 98.5%), while nitrite remained at low concentration (< 0.62 mg/L) during the whole denitrification period. 1,2,3,4-Tetrahydro-2-methylquinoline, 4-ethyl-benzenamine, N-butyl-benzenamine, N-ethyl-benzenamine and 2,6-diethyl-benzenamine were metabolites produced during the degradation. The degradation pathway of 2-methylquinoline by E. aerogenes TJ-D was proposed. 2-Methylquinoline is initially hydroxylated at C-4 to form 2-methyl-4-hydroxy-quinoline, and then forms 2-methyl-4-quinolinol as a result of tautomerism. Hydrogenation of the heterocyclic ring at positions 2 and 3 produces 2,3-dihydro-2-methyl-4-quinolinol. The carbon-carbon bond at position 2 and 3 in the heterocyclic ring may cleave and form 2-ethyl-N-ethyl-benzenamine. Tautomerism may result in the formation of 2,6-diethyl-benzenamine and N-butyl-benzenamine. 4-Ethyl-benzenamine and N-ethyl-benzenamine were produced as a result of losing one ethyl group from the above molecules.     

Photocatalytic degradation of carbofuran in TiO2 aqueous solution：Kinetics using design of experiments and mechanism by HPLC/MS/MS

The photocatalytic degradation kinetics of carbofuran was optimized by central composite design based on response surface methodology for the first time. Three variables, TiO2 concentration, initial pH value and the concentration of carbofuran, were selected to determine the dependence of degradation efficiencies on independent variables. Response surface methodology modeling results indicated that the degradation efficiency of carbofuran was highly affected by the initial pH value and the concentration of carbofuran. Then nine degradation intermediates were detected by HPLC/MS/MS. The Frontier Electron Densities of carbofuran were calculated to predict the active sites on carbofuran attacked by hydroxyl radicals and photoholes. Point charges were used to elucidate the chemisorption pattern on TiO2 catalysts during the photocatalytic process. By combining the experimental results and calculation data, the photocatalytic degradation pathways of carbofuran were proposed, including the addition of hydroxyl radicals and the cleavage of the carbamate side chain.     

活化温度对SCAC制备过程中副产物生成规律的影响

文章研究了污泥-玉米芯活性炭(SCAC)制备过程中,活化温度对副产物(热解气和热解油)生成规律的影响。热解气和热解油分别采用气相色谱仪和气质联用仪进行分析检测。试验结果表明,随着活化温度的升高,SCAC的产量逐渐降低,热解气与热解油的产量则随之增多。不同温度条件下,热解气的主要成分均为H2和CO2,热解气中H2所占的体积百分数随着活化温度的升高而增加,而CO2则相应降低。此外,热解气中CH4的含量也会随着活化温度的上升而略有提高,说明较高的活化温度更有利于热解气的资源利用。热解油组分较为复杂,每个温度条件下的液态产物都包括上百种化合物,可分为烷烃,烯烃,苯类,酚类,腈类,杂环化合物,多环芳烃,有机酸,酰胺,酯类,甾体,醇,酮以及其他类共14大类型,其中以有机酸、腈类和甾体类有机物含量居多。随着活化温度的升高,有机酸和多环芳烃的含量有所增加,而酚类化合物的含量则有所降低;当活化温度升高至650℃以上时,甾体类有机物含量明显降低。     

2,2′-二硝基联苄生产废水的处理研究

对十六烷基三甲基溴化铵改性凹凸棒土、凹凸棒土负载TiO2采用XRD、FTIR以及TG等手段进行了分析和表征,对比了改性凹凸棒土、活性炭、大孔树脂等不同吸附剂和凹凸棒土负载TiO2对二硝基联苄生产废水的处理效果。结果表明:十六烷基三甲基溴化铵改性凹凸棒土的废水中污染物的去除率比凹凸棒土提高了2.5倍;凹凸棒土负载TiO2在波长λ=254 nm下光照0.5 h,对废水中污染物的去除率是凹凸棒土的2.0倍;投加量为3%活性炭在pH为2.0⁵.0时,对该类废水中污染物的去除率可达80%以上。     

CASS工艺用于小城镇污水处理的工程设计研究

CASS是SBR的一种改进型污水处理工艺,在污水处理特别是小城镇污水处理中有着广泛应用。本文介绍了CASS工艺在广东某镇污水处理厂的工程应用情况,主要包括CASS的工艺流程、设计参数及设计要点。对运行效果和经济技术指标进行了总结,并对工艺的运行和管理提出相应的建议。实际运行结果表明,该厂在处理规模为1万m^3／d条件下,出水达到《城镇污水处理厂污染物排放标准》（GB18918-2002）一级B标准,达到设计要求。该项目的成功实施,为CASS工艺在小城镇污水处理厂的应用提供了参考。     

活性污泥模型参数实际可识别性研究方法

可识别性研究是参数估计的第一步。对目前应用于活性污泥模型参数实际可识别性研究的三种方法进行了综述,根据模型的复杂程度以及所要研究的参数数量,研究者可选用不同的方法。     

印染废水处理提标小试研究

利用"水解酸化+强化好氧+深度处理"的工艺技术方案开展印染废水小试研究。在工艺前端采用混流式和升流式两级水解酸化池,后续在曝气池投加活性焦载体,提高污泥浓度,强化好氧池处理能力,最后对生化出水加药混凝,并用生物活性焦滤池进行深度处理。结果表明,该处理工艺适宜处理印染废水,处理效果达到处理提标要求。     

活性污泥中超氧化物歧化酶(SOD)活性测定影响因素

研究以污水生物处理中的活性污泥为对象,采用氮蓝四唑光还原法测定超氧化物歧化酶(SOD)活性,从样品制备和保存方面探讨了是否添加溶菌酶液、细胞破碎时间、酶液保存时间与保存温度等因素对SOD活性测定的影响。研究表明,溶菌酶液的加入提高了细胞破碎效果;细胞破碎的条件为99次(工作3 s,停3 s),时间为40 min时破碎效果最好;酶液保存时间在4 h内最佳;-20℃保存比4℃保存对酶活性影响小。最佳检测条件为:取样量为1 mL时,反应温度为30℃,反应时间为20 min时,SOD酶活性最大。     

SBR工艺处理高盐有机废水的试验研究

采用SBR工艺分别研究了不同盐度驯化下的活性污泥的生物相和结构,及对COD、NH4＋-N、TP的去除率。结果表明,随着盐度的升高,活性污泥的微生物种类减少,结构变得紧密细小;盐度在1.5%范围内,SBR工艺对COD、NH4＋-N的去除率均达到90%以上;盐度为1%时,TP的去除率为76%。     

内循环活性炭生物流化床处理农药生产废水的试验研究

采用内循环活性炭生物流化床反应器处理某农药厂生产废水,通过试验研究了该反应器在室温条件下处理农药生产废水的性能.结果表明:当进水pH值控制在7.0～7.5、水力停留时间为6h、曝气量控制在使活性炭处于流化状态时,CODcr的去除率为50％,总氮的去除率为32.33％,同时可生化性明显提高,生物毒性有所降低.