Mitigation of peroxidative stress for barley exposed to cadmium in the presence of water-extractable organic matter from compost-like materials

The effects of water-extractable organic matter (WEOM) from compost-like materials on peroxidative stress were investigated for hydroponic culture of barley exposed to Cd. In the presence of WEOM, lipoxygenase activity and malondialdehyde, indices of peroxidative stress in barley, were significantly reduced, compared to those with Cd alone (5 μM) for a 30-d culture (p < 0.05). In addition, Cd uptake in the presence of WEOM samples was significantly lower than that in their absence (p < 0.05). These results indicate that the addition of WEOM can be effective in mitigating the peroxidative stress in barley exposed to Cd. Of the total Cd in the solution, 7–8% was complexed with WEOM, indicating that the complexation of Cd with WEOM is a minor factor in reducing Cd-induced stress in barley. The WEOM sample was purified by cation-exchange column and ultrafiltration to remove the nutrient minerals, such as Ca, Mg and Fe. When the purified WEOM was employed for hydroponic culture in the presence of Cd, significant decreases in peroxidative stress and Cd uptake were observed (p < 0.05). These results show that the organic components in WEOM contribute to the mitigation of peroxidative stress in barley exposed to Cd.     

Climate change,adaptation and Eco-Art in Singapore

Eco-Art has recently emerged as a potential means to place emphasis on environmental issues such as climate change, recycling and the metabolism of the city experienced both materially and conceptually within local, regional and global contexts. Such art presents the possibility of shaping civic practices in arenas beyond those of traditional planning domains. Adopting a pragmatic approach, which recognises the contextual pluralism that exists in debates regarding climate change, this paper is interested in how Eco-Art projects encourage the re-imagining of urban spaces within the context of sustainability, and flows of materials and the recycling of plastic in art specifically.     

石墨烯材料去除重金属及放射性核素的研究

石墨烯及其改性材料具有比表面积大、吸附能力强、抗辐射性能好、耐高温、耐酸碱等优点,近年来在去除重金属和放射性核素领域得到了广泛关注.本文简要介绍了石墨烯的合成及改性方法,综述了石墨烯材料去除水中重金属离子和放射性核素的研究进展,包括吸附容量、影响因素、吸附动力学、吸附热力学模型和吸附机理,分析了该研究领域目前存在的问题,探讨了今后的研究方向.     

Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid(OA) on the immobilization of Pb(Ⅱ) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(Ⅱ) by KH2PO4, phosphate rock(PR), activated phosphate rock(APR) and synthetic hydroxyapatite(HAP) at different phosphate:Pb(P:Pb) molar ratios(0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or Ca Cl2, Community Bureau of Reference(BCR) sequential extraction and toxicity characteristic leaching procedure(TCLP)methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was 5 mg/L for the red soil at P:Pb molar ratio 4.0. Water-soluble Pb could not be detected and the TCLP-Pb was 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APR was most effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pb molar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

基于BP神经网络的矿车运行时矿井摩擦阻力的预测*

为了快速有效地确定矿车等运输设备在巷道内运行时矿井摩擦阻力的变化情况,克服模拟软件计算量和现场实测工作量大的问题,以巷道风流速度、矿车运行速度、阻塞比、矿车长度4个矿车运行时巷道摩擦阻力的影响因素作为切入点,采用动网格技术模拟得到矿车在巷道内运行时有关矿井摩擦阻力的数据,以此为样本构建基于BP神经网络的矿井摩擦阻力预测模型,运用MATLAB软件进行网络训练,并将BP神经网络预测值与FLUENT模拟值进行对比。研究结果表明:BP神经网络结构比较简单,能以较快速度收敛,预测值与模拟值最大误差在7%以内,该神经网络模型用于求解矿车等运输设备在巷道内运行时摩擦阻力的变化情况是可行的。     

海上溢油应急物资调度双目标规划模型

为最大程度降低溢油事故造成的不利影响,提出充分考虑海上油膜漂移特性及溢油点和漂移点对救援物资需求不确定等特点,基于鲁棒优化思想,建立救援应急成本最小、应急时间最短的双目标规划模型,并基于NSGA-Ⅱ算法设计求解方法.结果 表明:决策者可根据自身对溢油事故规模的判断,得到不同应急物资调度方案,为应急出救点的选择和物资调度...     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

机器学习在材料服役性能预测中的应用

针对材料服役性能预测存在误差大、计算复杂、适用性差等问题,提出了基于数据挖掘的机器学习预测方法。首先阐述了机器学习的应用流程,并总结了常用模型原理及其在材料性能预测中的应用。然后采用多种机器学习模型对RPV钢的辐照性能进行预测,并通过Stacking集成方法提高了模型的预测精度。结果表明,机器学习可用于材料服役性能预测,具有较高的预测精度和可靠性。根据材料服役数据的不同特征选择合适的学习模型,同时进行模型融合和参数优化,可有效提高模型的预测精度及运算速度。     

车用高分子材料不同地区户外曝晒试验相关性研究

目的将3种高分子材料以及3种车用外饰材料分别投放在中国海南琼海和美国佛罗里达州2种典型湿热环境中进行户外曝晒试验,研究气候相似的2种地区的试验相关性。方法通过测试相同时间间隔下不同材料在2处试验场曝晒过程中的黄变程度,表征材料的老化现象。采用斯皮尔曼等级相关系数的统计方法,研究材料在2个地区相同时间节点的试验结果的相关性,并利用时间同轴的作图方法比较2个地区严酷度的差异。结果琼海与佛罗里达州2个地区在各个时间节点的相关系数接近于1,且在材料黄变方面呈现一定比例关系。结论琼海和佛罗里达州2个地区的试验结果呈现出较好的相关性,且严酷度比值约为琼海︰佛罗里达=1︰1.19。     

有机阳离子型电荷杀菌材料研究现状及展望

细菌等致病微生物可通过空气、水、土壤、食物等途径在自然界中传播,易对人体造成诸如肺结核、淋病、鼠疫等健康风险。目前广泛使用的灭菌方式包括紫外线、臭氧、氯气、电荷等物理或化学方法,其中电荷杀菌因具有无组织毒性的优点被广泛使用。研究表明：有机阳离子型电荷杀菌材料相比传统的金属离子杀菌材料具有抗菌效能优异、不产生耐药性、生物安全性高等优点,其杀菌性能受分子大小、烷基链、反离子类型、电荷密度等因素影响。本文系统综述了目前有机阳离子型电荷杀菌材料的类型、结构特征、杀菌性能及影响因素,抗菌机理及应用现状,分析了其存在的问题和发展方向,为有机阳离子型电荷杀菌材料的后续研究和应用提供一定的借鉴和指导。