Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

宝钢焦化废水处理技术发展与现状

焦化废水的处理一直是国内外废水处理领域的难题之一。文章以宝钢为例,介绍并分析了该企业焦化废水处理技术的发展与现状。     

超临界锅炉特种管材氧化皮结构特征及剥落规律

通过对超临界锅炉几种常用的铁素体钢及奥氏体钢高温换热管进行取样分析研究,得到了几种材质在运行中产生的氧化皮的结构特征和剥落规律。     

钢渣吸附剂吸附机理的研究

采用间歇振荡法,研究了钢渣吸附模式、选择性以及等温吸附方程。结果表明,钢渣对阳离子的吸附容量远远大于对阴离子的吸附容量,其吸附模式属于离子交换;其对重金属离子具有一定的吸附选择性,其选择性能与离子的电性、电价、离子半径和水化热等因素有关;钢渣吸附Pb2＋是单层吸附,符合Langmuir等温吸附方程。     

我国废钢加工设备发展中的问题及管理建议

我国钢铁工业的快速发展,带动了废钢回收及废钢加工设备产业的发展。介绍了我国废钢加工设备的生产规模及现状,对废钢加工设备制造企业多元化发展现象进行分析,并对废钢加工设备制造企业的规范化管理提出合理化建议。     

钢铁生产行业二英污染特征变化及其排放因子

对我国某省多家钢铁生产企业烧结工序和电炉工序排放烟气中二英（PCDD/Fs）污染水平、排放特征及其排放因子进行了初步研究.结果表明,烧结工序PCDD/Fs毒性当量浓度（以I-TEQ计,下同）为0.003~0.557 ng·m^-3,均值为0.165 ng·m^-3;电炉工序PCDD/Fs毒性当量浓度为0.006~0.057 ng·m^-3,均值为0.025 ng·m^-3.PCDD/Fs毒性当量浓度水平总体较低,较2005~2019年研究报道结果下降1~2个数量级.2005~2020年,钢铁生产行业排放PCDD/Fs毒性当量浓度水平先升高后降低,尤其是新的标准限值实施以及对烟尘等常规污染物进行超低排放控制后,呈现大幅下降.指纹谱图特征显示,所有烟气样品17种PCDD/Fs中最大浓度贡献单体为2,3,7,8-TCDF,与已有研究中以高氯代PCDFs和PCDDs为主不同,且低氯代PCDFs占比有所增加,表明PCDD/Fs生成主要来源有所变化.烧结工序和电炉工序PCDD/Fs同类物指纹分布特征相似,呈现典型的高温热过程特征,两个工序生产过程中PCDD/Fs的生成机制可能均为"从头合成".钢铁生产企业烧结工序PCDD/Fs废气排放因子（以I-TEQ计,下同）为0.003~0.5 μg·t^-1,排放因子平均值为（0.18±0.22）μg·t^-1;电炉工序PCDD/Fs废气排放因子为0.04~0.5 μg·t^-1,排放因子平均值为（0.27±0.23）μg·t^-1;低于UNEP于2013发布的"二英和呋喃排放识别和量化标准工具包"以及2004年我国二英排放清单中的排放因子,建议对我国钢铁生产行业PCDD/Fs排放状况开展调查,更新排放因子.     

锈蚀钢结构连接节点抗震性能研究进展

基于材料与连接构件层面,总结了近年来国内外既有试验研究及理论分析成果,主要包括腐蚀后的标准试件的单调拉伸、滞回性能退化分析,以及梁柱节点、框架结构的抗震性能研究,并给出了相应的力学性能退化模型,通过进行总结及对比分析后,为复杂环境下工程钢结构给出研究方向,同时也对我国工程结构的设计方法提供理论指导和参考依据。     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

天津LNG接收站码头钢桩长效腐蚀防护技术对比研究

为解决码头钢桩防腐问题,针对国内同类场站进行腐蚀调研,并对钢桩长效腐蚀防护技术进行优选。调研和试验结果表明,复层矿脂包覆技术(PTC)的防护效果优于其他2类腐蚀防护技术,是码头钢桩浪花飞溅区腐蚀防护的最佳解决方案。天津南港LNG接收站打破国内码头防腐设计的传统,在设计建造初期就采用PTC技术进行防腐保护,在国内尚属首例。相关调研和试验结果可为国内码头钢桩防腐设计提供参考。     

不锈钢在西太平洋深海环境中腐蚀规律研究

目的 研究不锈钢在西太平洋海域深海环境中的腐蚀规律。方法 采用深海高效串型试验装置对304不锈钢和316L不锈钢在西太平洋深海环境中进行深海实海腐蚀试验,分析不锈钢的腐蚀形貌、腐蚀速率和点蚀深度规律等,研究2种不锈钢在500、800、1 200、2 000 m海深下的腐蚀规律。结果 304不锈钢与316L不锈钢腐蚀质量损失主要由缝隙腐蚀引起,316L不锈钢的腐蚀程度总体上低于304不锈钢,304不锈钢的腐蚀速率低于0.4 mm/a,316L不锈钢的腐蚀速率低于0.25 μm/a。深海环境中,304不锈钢的腐蚀产物主要是α-Fe2O3、γ-FeOOH、γ-Fe2O3,316L不锈钢的腐蚀产物主要是α-FeOOH、γ-FeOOH、γ-Fe2O3。结论304不锈钢和316L不锈钢在西太深海环境中使用过程中应避免缝隙的形成,降低其发生缝隙腐蚀和点蚀的概率。