Biodegradation of phenol by free and immobilized Acinetobacter sp. strain PD12

A new phenol-degrading bacterium with high biodegradation activity and high tolerance of phenol, strain PD 12, was isolated from the activated sludge of Tianjin Jizhuangzi Wastewater Treatment Facility in China. This strain was capable of removing 500 mg phenol/L in liquid minimal medium by 99.6% within 9 h and metabolizing phenol at concentrations up to 1100 mg/L. DNA sequencing and homologous analysis of 16S rRNA gene identified PD12 to be an Acinetobacter sp. Polyvinyl alcohol （PVA） was used as a gel matrix to immobilize Acinetobacter sp. strain PDI2 by repeated freezing and thawing. The factors affecting phenol degradation of immobilized cells were investigated, and the results showed that the immobilized cells could tolerate a high phenol level and protected the bacteria against changes in temperature and pH. Storage stability and reusability tests revealed that the phenol degradation functions of immobilized cells were stable after reuse for 50 times or storing at 4℃ for 50 d. These results indicate that immobilized Acinetobacter sp. strain PD 12 possesses a good application potential in the treatment of phenol-containing wastewater.     

Kinetics of selective catalytic reduction of NO by NH3 on Fe-Mo/ZSM-5 catalyst

The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results show that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3, respectively, at 350-450℃. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.     

Ti/SnO2-Sb2O5/PbO2阳极电化学氧化降解苯甲酸研究

文章研究了TI/SnO2-Sb2O5/Pbo2在两室电解池中氧化降解苯甲酸的性能,主要考察了电流密度、初始pH值、初始苯甲酸浓度和支持电解质这四个参数对TOC去除效率的影响。实验表明在电流密度为30 mA/cm2,初始苯甲酸浓度为0.5 mmol/L,支持电解质(Na2SO4)为0.1mol/L的条件下,经过6 h反应...     

La-Co-Fe-Cu/HZSM-5在尾气碳颗粒燃烧中的催化性能

采用柠檬酸络合低温浸渍法制备分子筛负载钙钛矿型复合氧化物催化剂。采用XRD、SEM和H2-TPR等手段对催化剂性能进行表征,并在微型固定床反应器中对催化剂进行活性评价。结果表明,在钙钛矿型复合氧化物中进行B位离子掺杂,可以改善催化活性,碳颗粒燃烧温度降低。在20%LaCoO3/HZSM-5催化剂中用铁离子部分取代钴离子可以改善碳颗粒的燃烧性能,取代量增加碳颗粒燃烧温度降低,但是生成CO2的选择性也降低,以20%LaCo0.2Fe0.8O3/HZSM-5为催化剂,Tig、Tm和Tf分别为256℃、399℃和403℃,但生成CO2的选择性只有72.5%。在20%LaCo1-xFexO3/HZSM-5中的钙钛矿型复合氧化物B位离子中加入铜离子后,在碳颗粒燃烧反应中生成CO2的选择性得到明显改善,Sco2提高10个单位以上。以20%LaCo0.2Fe0.6Cu0.2O3/HZSM-5为催化剂,在碳颗粒燃烧反应中生成CO2的选择性可以达到94.7%,Tig、Tm和Tf分别为242℃、427℃和445℃。     

稀释接种法测BOD5考核样品的一些注意点

用稀释接种法测定BOD5时,由于操作繁琐,全部实验时间需要5d,任一环节出现问题都会影响实验结果。在进行考核实验时,由于时间紧,样品量有限,因此每个实验操作步骤都要谨慎仔细。通过实践经验,就BOD,考核实验总结了一些注意点。     

液相高压放电降解RB5染料废水的试验研究

随着印染工艺不断更新,大量化学分子结构复杂的化工染料应用到印染行业,使得常规的水处理工艺难以降解印染废水中的染料。本文以活性黑（RB5）染料为研究对象,采用液相高压放电产生强氧化性自由基来降解染料废水,考察反应时间、初始浓度和气体流量对RB5降解的影响,研究结果表明：在外部功率相同的情况下,浓度高染料其降解率相对较低;通入氧气量增加,产生的活性自由基和活性物质数量也增加,RB5的降解率也增大,但气流量不宜过大;高压放电产生的各种活性物质容易破坏染料发色基团的分子链,使其脱色。     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

重金属阳离子荧光传感器合成及光谱性研究

通过亚胺缩合的反应制备出阳离子荧光传感器（Cation Fluorescent Sensors,CFSs）,并对其结构、光谱性能检测、荧光量子产率等进行了详细的研究.通过荧光化学传感器产生的荧光光谱一直是高效的分析方法,因此合成了新的基于席夫碱的荧光化学传感器,并研究了对各种金属离子的结合特性.在CH3CN溶液中测试了阳离子荧光传感器时不同阳离子的选择性响应,发现对Cu2＋有较好的选择性,可用于Cu2＋的检测.该类阳离子荧光传感器是基于2,2-联噻吩-5-乙醛的荧光发射基团和邻氨基苯甲醚为识别基团的一类阳离子荧光传感器.     

电化学氧化PFOA阳极材料筛选及其机制研究

全氟辛酸(PFOA)具有环境持久性及内分泌干扰性,传统的生物降解及高级氧化法对PFOA的去除效果微弱.本研究采用电化学氧化法降解PFOA,选取BDD(掺硼金刚石电极)、Pt、Ti、Ti/RuO2、Ti/RuO2-IrO2、Ti/In2O3、Ti/SnO2-Sb2O5-IrO2、Ti/SnO2-Sb2O5-RhO2、Ti/SnO2-Sb2O5、Ti/SnO2-Sb2O5-CeO2和Ti/SnO2-Sb2O5-Bi2O3这11种阳极材料为备选电极.采用线性扫描伏安法测试析氧电位(OEP),评价11种电极对PFOA的降解效果和脱氟效果,并采用超声-电化学协同方法间接证明PFOA分子在电极表面的直接电子转移是降解反应的第一步.Ti/SnO2-Sb2O5-Bi2O3、Ti/SnO2-Sb2O5-CeO2、Ti/SnO2-Sb2O5和BDD对PFOA有较好的电氧化效果,降解率分别是89.8%、89.8%、93.3%和98.0%.Pt、Ti/SnO2-Sb2O5-RhO2、Ti/SnO2-Sb2O5-IrO2和Ti/In2O3对PFOA的电氧化效果微弱,降解率分别是2.1%、2.3%、12.5%和3.1%.而Ti、Ti/RuO2和Ti/RuO2-IrO2对PFOA没有电氧化能力.PFOA分子经过电极表面的直接电化学氧化发生脱羧反应,后经过逐步脱掉CF2单元的循环生成短链的全氟羧酸类化合物C6F13COO-、C5F11COO-、C4F9COO-和C3F7COO-.     

半短程亚硝化与厌氧氨氧化联合脱氮工艺微生物特征研究进展

半短程亚硝化-厌氧氨氧化脱氮技术具有良好的发展前景,该工艺的发展以及应用分子生物学技术对好氧氨氧化菌种群和厌氧氨氧化种群生态学的研究备受人们关注.本文综述了工艺原理和影响因子诸如温度、pH值、氧的可利用性、游离氨浓度等对氨氧化菌及厌氧氨氧化菌的影响,并介绍了应用分子生物学方法对氨氧化菌与厌氧氨氧化菌的类别及分布的研究结果,并对该工艺提出了展望.