阳离子表面活性剂对污泥脱水性能影响研究

研究了两种含有不同长度疏水链的阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)和四甲基溴化铵(TMAB)对活性污泥脱水性能的影响,探讨了两种表面活性剂的作用机理。实验数据表明,在同样的投加量下,CTMAB比TMAB能更有效地改善污泥的脱水性能。结果表明,与TMAB相比,投加约为泥样干质量25%的CTMAB可以释出更多污泥胞外聚合物总量,约为231mg/L;污泥毛细吸水时间(CST)可缩短为73s左右,离心后污泥上清液浊度降至15.9,离心后污泥含水率为73.2%;CTMAB和TMAB对污泥沉降性能的改善不是非常明显。     

南水北调丹江口库区土壤中微塑料分布特征及风险评估

为探究丹江口库区土壤中微塑料赋存特征及影响因素,通过对果园、旱地、水田和湿地进行土壤样品采集,利用密度分选、显微镜观察和拉曼光谱仪测定等方法对土壤中微塑料进行鉴定.结果表明,研究区采集的64个样本均有微塑料检出,丰度范围为645~15161 n·kg^-1.空间分布上,库尾高于库中和库首,且表层土壤（0~20 cm）中微塑料的丰度明显低于下层土壤（20~40 cm）.微塑料主要类型为聚丙烯（26.4%）和聚酰胺（20.2%）,粒径主要集中在50~500 μm之间（75%）,常见形状为碎片状（66.2%）.相关性分析显示,土壤微塑料丰度与土地利用、距水面和住宅的距离、人口密度和土壤性状密切相关.从微塑料污染风险来看,72.1%区域微塑料聚合物污染指数处于Ⅲ级和Ⅳ级,丹江口库区存在一定的微塑料污染风险.研究结果可为微塑料风险评估提供支撑.     

聚己内酯与聚羟基丁酸戊酸酯的脱氮性能对比

以可生物降解聚合物聚己内酯(PCL)和聚羟基丁酸戊酸酯(PHBV)作为反硝化缓释碳源和微生物载体,利用清水释碳和批式反硝化试验选出适用于再生水反硝化深度脱氮生物滤池的可生物降解碳源滤料,通过比较与分析碳源滤料的表面形态及物质特性和附着微生物的群落特征揭示其性能优越的原因.结果表明,PHBV反硝化启动时间短,反硝化速率高,剩余有机物浓度低,相比PCL具有更稳定持续的反硝化效果.原因是其表面粗糙,且含有大量C—O和CO等亲水性基团,易于微生物附着和降解利用;其表面附着的微生物种类多样,其中发硫菌属(Thiothrix)、假单胞属(Pseudomonas)、菌胶团属(Zoogloea)、黄杆菌属(Flavobacterium)和脱氯菌属(Dechloromonas)等优势菌属均具有异养反硝化功能.因此,PHBV更适合作为再生水反硝化深度脱氮生物滤池的碳源滤料.     

木耳菌糠生物炭对阳离子染料的吸附性能研究

为了有效处理印染废水,以废弃木耳菌糠（AG）为原料,采用限氧热解法在350、550、750℃的温度下制备木耳菌糠生物炭（AGBC）,处理含有孔雀石绿（MG）、番红花红T （ST）的有色废水.考察了不同初始pH值、吸附时间、初始浓度对AGBC吸附MG、ST的影响,讨论了吸附动力学及等温吸附特性.并利用傅里叶变换红外光谱（FTIR）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）等技术对吸附前后的菌糠生物炭进行表征,探究吸附机理.结果表明：随着热解温度的升高,吸附剂表面的含氧官能团数量逐渐减少,而比表面积和芳香化程度逐渐增加.MG的平衡吸附量随溶液pH值的升高而增大,而ST的平衡吸附量呈现相反趋势.AGBC对MG、ST的吸附分别在8h和4h基本达到平衡.AGBC对MG的吸附过程符合准一级动力学模型与Freundlich模型,说明吸附过程以物理吸附为主;对ST的吸附过程符合准二级动力学模型与Freundlich模型,说明吸附过程以化学吸附为主.与AG350和AG550相比,AG750对MG和ST的吸附量更高,经Langmuir模型拟合,其对MG和ST的最大吸附量分别为10249.79mg/g、3353.49mg/g.吸附机理表明,AGBC对MG的吸附主要为静电引力和π-π共轭作用,对ST的吸附主要为氢键作用、π-π共轭作用以及静电引力.说明AGBC对阳离子染料具有一定的吸附潜力,是一种经济高效的吸附材料.     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

PVC/PES相容性及对共混超滤膜性能的影响

研究了聚氯乙烯(PVC)与聚醚砜(PES)共混体系相容性及其对共混膜性能的影响。利用溶解度参数原则和混合热焓原则进行理论预测,用铸膜液粘度法进行实验表征,均说明该体系为部分相容体系,且其相容性与组成及共混温度有关。通过对共混膜传质特性的考察,表明铸膜液的相容性会明显影响共混膜的性能;采用共混法可以改善膜性能。     

泡沫聚合物保温材料的研究进展及其应用

综述了以聚氨酯泡沫、聚乙烯泡沫和酚醛泡沫塑料为代表的轻质聚合物泡沫保温材料的发展状况。     

Speciation characterization and coagulation of poly-silica-ferric-chloride：The role of hydrolyzed Fe（Ⅲ） and silica interaction

The highly e cient inorganic polymer flocculants (IPFs) of the ferric-silica system is a new and promising coagulant. Interactions between ferric species and silica play a large part in the coagulation of suspensions. These e ects are quite distinct from those associated with polymeric or colloid silica. However, although these species are key to coagulation e ciency, they have not been comprehensively discussed. A new type of coagulant, poly-silica-ferric-chloride (PFSC), was synthesized by co-polymerization and characterized by time complexation spectroscopy and photon correlation spectroscopy. Compared with traditional ferric salt, the results indicated that PFSC had a higher molecular weight, lesser positive charge, lower Feb and higher Fec. The higher the Si/Fe ratio, the higher the silica and lower the silicac found. The PFSC with appropriate polysilica acid not only obtained better coagulation/flocculation e ciency in turbidity removal, enhanced the flocculation index (FI) and provided less residual ferric, it also lowered water treatment costs compared to traditional ferric salt. Results showed that PFSC could remove colloid particles in water by charge neutralization and sweeping, adsorption bridging mechanism.     

新型甲醛捕获剂的合成及其捕获性能研究

游离甲醛是室内空气中最主要的污染物之一,对人体造成的危害越来越受到关注.因此,研制新型甲醛捕获剂及其捕获性能具有重要的实际意义.采用亲水性单体丙烯酰胺和亲油性单体苯乙烯为反应物,以氧化还原引发剂,经霍夫曼降解反应合成了含氨基的两亲性共聚物.通过单因素实验考察了不同原料比、引发剂剂量时所合成的产物对人造板游离甲醛捕获率的影响,然后根据单因素实验的结果设计正交试验以优化合成条件.结果表明:苯乙烯单体和丙烯酰胺单体的摩尔比为1:3,引发剂与单体摩尔比为9%,丙烯酰胺单体和NaClO的摩尔比为1:1.2时产品捕获率最好,可达60.40%.实验合成的两亲性共聚物在常温下不挥发,相对稳定而且捕获效果较好,是一种理想的新型甲醛捕获剂.     

阳离子染料废水处理的工艺研究

首先采用两级物化－电解－吸附工艺对高浓度阳离子染料生产废水进行预处理,再与低浓度生产废水、生活污水混合生化处理,总脱色率和CODcr去除率均可达到99．9％以上,达标排放。