人工湿地常用生物陶粒基质LDHs覆膜改性及其除磷效果研究

分别利用3种二价金属化合物和3种三价金属化合物,采用水热共沉淀法在碱性条件下对人工湿地中常用的生物陶粒基质进行层状双金属氢氧化物(LDHs)覆膜改性,并将9种不同类型的LDHs覆膜改性生物陶粒基质和普通生物陶粒基质分别填充于10个垂直流人工湿地模拟实验柱中,进行除磷净化实验.结果表明,9种不同类型的改性生物陶粒基质均能有效提高磷素的净化效果;Zn系LDHs改性生物陶粒对总磷、溶解性总磷、磷酸盐均有很好的处理效果,其中Zn Fe-LDHs、Zn Co-LDHs和Zn Al-LDHs对总磷的平均去除率均在92%以上,对溶解性总磷和磷酸盐的平均去除率均超过95%;其对磷素的净化机理主要集中于物理化学作用,同时还应与其对微生物生长的促进作用有关.     

Experimental study of humidity influence on triboelectric charging of particle-laden duct flows

Electrostatic charge on powders arises during pneumatic transport due to particle–particle and particle–surface interactions via triboelectrification. This is a potential threat to the safety of industrial production and the source of numerous fires and dust explosions in the past. Triboelectric charges are affected by environmental conditions, such as ambient temperature and relative humidity. In this work, we experimentally investigated the influence of ambient humidity on the particle charge of gas–solid flows in a square-shaped duct. Monodisperse PMMA particles are fed into a fully developed airflow in a PMMA duct and then pass through a metallic duct section. The charge of particles is measured at the outlet of the metallic duct via a Faraday cup. By measuring the electrostatic charge under various environmental conditions, we observed that the electrostatic charge first increases with the humidity and then decreases when the humidity becomes higher.     

有机阳离子型电荷杀菌材料研究现状及展望

细菌等致病微生物可通过空气、水、土壤、食物等途径在自然界中传播,易对人体造成诸如肺结核、淋病、鼠疫等健康风险。目前广泛使用的灭菌方式包括紫外线、臭氧、氯气、电荷等物理或化学方法,其中电荷杀菌因具有无组织毒性的优点被广泛使用。研究表明：有机阳离子型电荷杀菌材料相比传统的金属离子杀菌材料具有抗菌效能优异、不产生耐药性、生物安全性高等优点,其杀菌性能受分子大小、烷基链、反离子类型、电荷密度等因素影响。本文系统综述了目前有机阳离子型电荷杀菌材料的类型、结构特征、杀菌性能及影响因素,抗菌机理及应用现状,分析了其存在的问题和发展方向,为有机阳离子型电荷杀菌材料的后续研究和应用提供一定的借鉴和指导。     

人工增雨（雪）效果评估方法探索

人工增雨（雪）常用的评估方法为统计检验和物理检验,统计检验需要大量试验样本,且随机化试验在我国难以实现,大量样本无从获得。物理检验目前主要是雷达观测演变状况和飞机直接观测云内微物理参数,由于技术和能力有限,这些方法都难以实现。为了在人工影响天气作业后尽快得出评估结果供政府及环境保护等部门参考,利用雨滴谱记录数据对一次人工增雪作业后的效果进行了评估,发现这些数据在没有常规降雪记录情况下具有一定的参考价值。从评估结果看,人工增雪作业后,降水强度有明显增大的趋势。     

饮食业污水排污费征收办法的研究

在分析了当前饮食业排污收费现状和存在问题的基础上，提出了一种较易操作的排污费征收办法，并认为这种征收办法在实践上是可行的。     

Adsorption of mixed cationic-nonionic surfactant and its effect on bentonite structure

The adsorption of cationic-nonionic mixed surfactant onto bentonite and its effect on bentonite structure were investigated. The objective was to improve the understanding of surfactant behavior on clay mineral for its possible use in remediation technologies of soil and groundwater contaminated by toxic organic compounds. The cationic surfactant used was hexadecylpyridinium bromide (HDPB), and the nonionic surfactant was Triton X-100 (TX100). Adsorption of TX100 was enhanced significantly by the addition of HDPB, but this enhancement decreased with an increase in the fraction of the cationic surfactant. Part of HDPB was replaced by TX100 which decreased the adsorption of HDPB. However, the total adsorbed amount of the mixed surfactant was still increased substantially, indicating the synergistic effect between the cationic and nonionic surfactants. The surfactant-modified bentonite was characterized by Brunauer-Emmett-Teller specific surface area measurement, Fourier transform infrared spectroscopy, and thermogravimetric-derivative thermogravimetric/differential thermal analyses. Surfactant intercalation was found to decrease the bentonite specific surface area, pore volume, and surface roughness and irregularities, as calculated by nitrogen adsorption-desorption isotherms. The co-adsorption of the cationic and nonionic surfactants increased the ordering conformation of the adsorbed surfactants on bentonite, but decreased the thermal stability of the organobentonite system.     

基于加热改性预处理废线路板的热力学作用过程研究

电子废物是固体废物环境管理的热点问题,而废线路板是电子废物的研究核心.废线路板是由铜箔、树脂和增强材料层压而成的复合材料,以破碎和分选过程相组合的机械物理方法是其资源化回收处理的主流技术,就如何提高破碎效果已成为机械物理技术发展面临的难题.研究提出了加热改性预处理的技术方法,用于废线路板结构物理改性和微观破坏,以提高破碎解离效率,其可实现金属与非金属的高度解离.基于改性处理技术,本文还分别从微观和宏观破坏力学角度,探究了加热改性处理机制.同时,结合ANSYS有限元热应力模型,对改性作用进行了理论分析.     

氨基硫脲改性山竹壳对Cd2+. Pb2+的吸附

采用氨基硫脲改性山竹壳,制备新型的改性山竹壳吸附剂,研究其对Cd2+、Pb2+的吸附性能。结果表明,吸附Cd2+、Pb2+的适宜条件为:pH 6.0,吸附时间120 min。改性后山竹吸附剂对Cd2+、Pb2+的吸附容量能有了很大程度的提高,Cd2+、Pb2+最大吸附量分别达到39.37、57.14mg/g。吸附过程可以很好地用准二级动力学方程描述,吸附等温线用Langmuir方程的拟合效果优于Freundlich方程。     

铝钛改性MCM-41材料对污水中铅镉的吸附研究

研究了改性MCM-41材料对污水中重金属铅、镉离子的吸附行为。在MCM-41材料中加入Al、Ti两种诱因金属离子来合成新的Al-Ti-MCM-41及Ti-Al-MCM-41改性材料,通过氮气吸附-脱附等温线对Al-Ti-MCM-41(Al/Ti=1∶1)及Al-Ti-MCM-41(Al/Ti=2∶1)样品进行了表征,并采用改性后的MCM-41材料为吸附剂对含有二价铅、镉离子的溶液进行吸附实验,考察了吸附剂投加量,Pb2+、Cd2+初始质量浓度和吸附温度对吸附的影响。结果表明:改性Al-Ti-MCM-41(Al/Ti=1∶1)材料的最可几孔径和比孔容分别为16.68 nm和0.046 cm3/g,由BJH计算得到的平均孔径为17.02 nm;Al-Ti-MCM-41(Al/Ti=2∶1)的最可几孔径和比孔容分别为16.88 nm和0.083 cm3/g,由BJH计算得到的平均孔径为17.08 nm。Al-Ti-MCM-41(Al/Ti=1∶1)对Cd2+的吸附率为99.8%;Al-Ti-MCM-41(Al/Ti=2∶1)对Pb2+的吸附率为99.96%;Pb2+和Cd2+的吸附容量随吸附剂投加量的增加而降低,随离子初始浓度的增大而增加;温度越高越有利于吸附。该研究重点考察改性MCM-41材料在重金属铅镉离子污染治理中的性能,从而为解决重金属铅镉的污染,加强环境保护提供理论支撑和技术支持,具有明确的现实意义。     

Na_2CO_3对回填材料膨润土的改型效果分析

以新疆柯尔碱膨润土为原料,加入不同比例的Na2CO3改型剂,研究改型剂添加对膨润土胶质价、膨胀容和pH值的影响。另外,考虑到压实膨润土的非饱和渗透特性对于评价缓冲回填材料性能具有重要意义,故采用压力膜仪测量压实Na2CO3改型膨润土和原土的土水特征曲线,分析研究二者基质吸力随体积含水率变化的相关关系。实验结果显示,添加Na2CO3改型剂可以增大膨润土的胶质价、膨胀容和pH值,成功地将膨润土中的钙蒙脱石转化为钠蒙脱石,其对柯尔碱膨润土pH值的作用效果满足地质处置库对缓冲回填材料的要求;改型后膨润土的持水能力明显大于原土。