城市增长边界分析方法研究——以长江三角洲常州市为例

诸多国家已采取城市增长边界(Urban growth boundary, UGB)对策以抑制城市蔓延,我国目前城市与土地利用规划也明确要求划定UGB,但其分析方法研究还较薄弱。综合系统动力学模型、元胞自动机及城市承载力分析研究常州市区UGB,结果表明:预测到2020年常州市区城市建设用地面积为30 847 hm²,北部和南部组团外延增长、主城区及南北组团内部填充同步发展,UGB由沿江-德胜河-沪宁高速-新孟河-德胜河-武宜运河-沿江高速-沪宁高速-市域界限等围合而成;模型预测的UGB与GH-UGB(实际规划UGB)北部和东部空间拟合良好,西部和南部拟合较差,表明模型预测对空间整体和要素联系考虑不足,而用地规模偏差则表明模型预测更为客观;UGB分析方法在政策、空间规划理念和整体格局上有待完善。     

系统动力学在污水处理中的应用研究

利用系统动力学原理,并根据活性污泥模型,构建Orbal氧化沟系统脱氮过程模拟的系统动力学模型。通过与实际情况相比发现,将模型分解为溶解氧模块、COD去除模块和TN去除模块是合理的,模拟发现减少转碟数量可以提高氧化沟系统脱氮效果。通过与实际运行的Orbal氧化沟进行对比发现,减少曝气转碟数量后,总氮去除率70%,比去年同期提高30%。     

高密度澄清池除氟中试研究

以聚合氯化铝为混凝剂,采用高密度回流絮凝澄清池进行饮用水除氟试验。考察了原水水量、氟初始浓度、原水浊度、絮体回流比等因素对除氟效果的影响。结果表明:高密度澄清池具有良好的除氟效果,可使滤后水中氟浓度低于1 mg/L。当絮体回流点位于快速混合处时,回流比为50%时,能提高氟的去除率。     

混凝-反渗透工艺处理某矿井废水的应用

介绍了一套混凝-反渗透工艺处理矿井废水的工艺,并对其原理及特点进行分析。该项目日处理量3 000t。通过对系统的调试和运行效果的研究找出了实际运行过程中的要点、需重点控制的参数和需改进的因素,并对设备的维护和使用提出合理的建议。实践证明,该工艺出水达到生活饮用水卫生标准。     

环洞庭湖区水资源供需系统仿真及优化决策研究

论文运用系统分析的理论与方法,分析环洞庭湖区水资源供需系统的特征和各要素之间的相互作用,建立水资源供需系统模型,仿真模拟传统发展模式、发展经济型模式、节水型模式和协调型模式等四种不同情景下,2010-2030年环洞庭湖区水资源供需变化趋势.结果表明:①随着经济的发展和人口的增长,环洞庭湖区水资源供需矛盾十分突出;②在协调型模式下,模拟期末环洞庭湖区总需水量达到159.1×10⁸ m³,供需缺口最大值出现在2020年,为1.9×10⁸ m³,到2030年水资源供给能力约有3.6×10⁸ m³富余,模拟期内水资源供给基本能够满足社会经济发展的需求,且能够获得最大的综合效益,是环洞庭湖区水资源开发利用的最佳方案;③为了达到预期目标,还需增强节水意识、完善用水管理、优化经济结构,加大水利投入和环境整治,提高节水技术水平和水利保障水平.     

Ecotoxicological effects of Trichloroethene upon plankton

A case study in an experimental pond was performed to evaluate the ecotoxic effects of Trichloroethene (TRI) upon the population density and productivity of phyto‐ and zooplankton. TRI was continuously released into two pond enclosures over 11 weeks (mean concentrations 1.5 and 7.5 mg/l). The chronic chemical treatment showed distinctive toxic influences upon the biota. Following the high TRI concentration, the phytoplankton density slightly increased; the productivity per single cells, however, was significantly reduced compared to the controls and the low TRI concentration. Cryptophyceae were the most sensitive algae taxa. The density and reproductivity of Daphniae and Phyllopodae decreased by the high TRI concentration. Most of the Rotatoriae were not negatively influenced. With increasing TRI concentrations two different bacteria forms showed a mass development. Small amounts of Trichloroacetic acid were detected in both enclosures as a conversion product of TRI (～3 μg/l after 80 days treatment).     

Post-seismic allocation of medical staff in the Longmen Shan fault area: case study of the Lushan Earthquake

In April 2013, a 7.0 magnitude earthquake struck along the Longmen Shan fault in the city of Ya'an, Sichuan province, China, causing 200 deaths, 11,470 injuries and 21 people to go missing. As no scientific disaster management studies have been done on medical staff dynamic behavior in the Longmen Shan fault area, this paper develops a system dynamics (SD) model to simulate the relief activities in the area after the 2008 Sichuan Earthquake shook Wenchuan County. Based on this SD model, the simulation showed that the results regarding the cumulative number of deaths and the final death toll fit the reality well for the 2008 Sichuan Earthquake in the Longmen Shan fault area. Findings from the simulation confirmed the best ratio of medical staff to rescue workers. After implementing the findings for the medical relief work at the 2013 Sichuan Lushan Earthquake, reasonable earthquake rescue policies were developed for the Longmen Shan fault area. The SD model demonstrated that it was possible to predict the optimum number of medical staff and that medical staff need to be trained to improve their treatment abilities. Furthermore, it is suggested that search and rescue workers should also assist in restoring road transport during any medical relief activities in the Longmen Shan fault area. These policies can be generalized to other earthquake relief activities in the Longmen Shan fault area as well as being a valuable reference for similar mountainous earthquake areas.     

苹果和土壤中丙森锌的消解动态及残留规律

研究了苹果和土壤中丙森锌残留的气相色谱分析方法,及其代谢物乙撑硫脲的高效液相色谱分析方法,并在天津、山东烟台和陕西咸阳进行了苹果和土壤中丙森锌及其代谢物乙撑硫脲残留消解动态和残留规律田间试验研究.结果表明,在0.05—2 mg.kg-1的加标水平下,苹果和土壤中丙森锌的加标回收率分别为77.12%—92.85%和9.24%—94.68%,变异系数分别为3.30%—6.56%和3.29%—5.29%;在0.05—1 mg.kg-1的加标水平下,苹果和土壤中乙撑硫脲的加标回收率分别为80.91%—97.47%和84.11%—99.97%,变异系数分别为3.23%—3.82%和2.80%—3.40%.苹果和土壤中丙森锌和乙撑硫脲的最小检出量分别为5.0×10-10g和1.0×10-10g,其中苹果和土壤中丙森锌的最低检出浓度为0.025 mg.kg-1,乙撑硫脲的最低检出浓度为0.005 mg.kg-1.按1.5倍推荐剂量600倍稀释液在苹果上施用65%戊唑醇.丙森锌可湿性粉剂1次,丙森锌在苹果和土壤中的残留消解半衰期分别为6.0—6.8 d和8.7—10.1 d.按推荐剂量和1.5倍推荐剂量在苹果上各施用65%戊唑醇.丙森锌可湿性粉剂3—4次,2次施药间隔为10 d,距最后一次施药21 d时,丙森锌在苹果中的最高残留量低于我国农业行业标准规定的最大残留限量2 mg.kg-1.     

不同来源太湖沉积物粒径分布及其对Cu的吸附特征

以不同来源的太湖沉积物为研究对象,利用Mastersizer 2000型激光粒度分析仪测定沉积物的粒度组成,利用筛析法和吸管法对不同来源沉积物进行分级,测定不同粒径沉积物中Cu含量及不同粒径沉积物对Cu2＋的饱和吸附量,研究沉积物对水溶液中Cu（Ⅱ）的吸附特性,从粒径分级和动力学角度探讨了太湖沉积物对Cu的吸附机理。结果表明：太湖沉积物粒径范围在0.002-0.1 mm,其颗粒组成以粉砂级与粘粒级为主,养殖区沉积物小粒径比例较高,小于0.05 mm粒径沉积物的比例为82.45%;吸附实验研究表明,粒径小于0.005 mm和0.005-0.01 mm沉积物中Cu含量较高,且此粒径沉积物对Cu（Ⅱ）的吸附量最大;吸附动力学研究表明,沉积物的吸附过程分为快反应和慢反应两个阶段,且吸附过程以表面吸附为主,伪二级动力学方程对动力学曲线拟合较好,其R2值达0.999以上。吸附热力学的研究结果表明：Freundlich方程比较适合描述沉积物对Cu2＋的吸附等温线,其R2大于0.99,对照区、养殖区和生活污水区沉积物对Cu（Ⅱ）的最大吸附量分别为229.20,249.98,261.20 mg.kg-1,方程式中的强度因子1/n不适合描述沉积物与重金属离子的结合能力。     

混凝过程中微絮体形貌的AFM液池成像观测与表征

采用扫描探针显微镜液池成像技术,对混凝过程中絮体的微观形貌进行了观测与表征.结果表明,原子力显微镜液池成像技术可以对混凝过程中的微絮体进行形貌表征和数字描述,并证实在实际印染工业尾水的微絮凝过滤试验处理过程中,微絮凝时间为2min,搅拌强度为100s-1时可以达到优化的处理效果.这也说明液池成像技术能够较好的反映混凝过程中微絮体的形貌变化特征,从而实现对环境微观界面过程的原位观测与表征.