机动车排气检验机构的环境影响评价研究

机动车排气定期检验机构对周边环境质量的影响虽然不大,但由于大多处在闹市区,贴近敏感人群,其噪声与机动车尾气对市民的影响却不容忽视。通过环境影响评价,分析机动车排气定期检验机构的环境影响特点,并结合机动车排气定期检验业务流程,对机动车排气定期检验机构的整体规划与布局提出合理建议,对噪声与大气污染物排放提出有效控制措施,不仅可以有效控制机动车排气定期检验机构对周边大气环境质量的影响,也能有效减小噪声对周边市民日常生活的影响。     

城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...     

锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷栽、极限荷栽、荷栽最大值和位移延性系数与钢筋锈蚀率和轴压比的关系.研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试...     

膜法海水淡化技术在玉环电厂的应用

华能玉环电厂4X1000MW燃煤机组生产用水全部采用经“膜法”海水淡化技术处理的淡化海水，该淡水海水具有较强的腐蚀性，对电厂脱硫系统产生一定影响，探讨了淡化海水对脱硫系统的腐蚀及应对措施。     

接地极的土壤腐蚀

接地极是接地装置的主要组成部分,接地极埋设在土壤中,用于泄流,保障电网和电气设备的安全运行。近年来,接地极的腐蚀损坏造成的事故屡有发生,接地极的土壤腐蚀引起了普遍的重视,防止接地极腐蚀已成为一个重要的研究课题。本文介绍了目前我国电网和电气设备接地极的选材,接地极土壤腐蚀的特点,并对接地极防腐蚀方法做了简单总结。     

废液处理新工艺超临界水氧化（SCWO）评述

超临界水氧化是一项对有机废液焚烧处理最有潜力的替代技术，在过去的20多年里，这项技术引起了广泛的关注。然而，作为一项管端技术，超临界水氧化仍存在许多不足，这些不足阻碍了它的工业应用。除了反应器腐蚀和盐析导致的技术问题外，超临界水氧化经常被认为是一项处理所有废液的“通用”技术，然而也是无法实现的“通用”技术。本文介绍了作为管端处理技术的超临界水氧化技术存在的问题，讨论了可能的解决办法，介绍了不同反应器的概念，提出了在超临界水氧化领域里开展进一步研究和发展新工艺流程的建议。此外，评价了超临界水氧化技术涉及到的自身能源供应问题。     

镁合金的大气腐蚀研究

综述了各种因素对镁合金大气腐蚀的影响,其中介绍了单一因素NaCl及两种因素协同作用对镁合金大气腐蚀的影响。同时介绍了镁合金大气电偶腐蚀的影响因素与Al含量对镁合金大气腐蚀的影响。简述了研究镁合金大气腐蚀的几种常用表征手段。     

The impact of handpump corrosion on water quality in rural areas of West African sub-region

Water, even in its natural environment, contains some level of impurities. Water is nearly a universal solvent. It contains dissolved solids and gases, and hosts a number of micro-organisms. The exploitation of groundwater by means of boreholes for supplying small user groups and rural communities with water has been widely applied in certain parts of the world for several decades. In recent years this practice has spread all over the globe, and hundred of thousands of boreholes have beendrilled to tap low-yield aquifers. It is evident that such boreholes require pumps for lifting thewater. In developing countries these are usually handpumps, butsolar as well as other systems with submersible pumps are also used, depending upon the energy sources available and the financial means of the beneficiaries. This article gives a general overview of groundwater quality with regard to itsphysico-chemical composition. The results presented originatefrom the experience gained from handpump equipped boreholes within the UNICEF through German Centre for Technical EducationTransfer executed inter-regional UNDP-Handpumps Project inWest African Regions. Particular attention is paid to presenting corrosion onthe water quality of wells in terms of iron concentrationand other parameters. Furthermore, the corrosion attack ongalvanised iron, the effect of biofilms on the corrosionrate, and the difference between internal and externalcorrosion of rising mains are shown.     

超临界水氧化中设备腐蚀的研究现状

超临界水氧化（SCWO）技术是近年发展起来的处理有机难溶废物的安全高效的新技术。在阐述超临界水的物理、化学性质的基础上，介绍了SCWO反应的工作原理和流程，分析总结了世界范围内开展的SCWO环境中设备腐蚀及监测技术等方面的研究动态，提出了我国SCWO技术研究的未来发展方向。     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.