加速腐蚀当量加速关系研究方法综述

为了进一步研究当量加速关系,归纳了现有腐蚀损伤当量化的研究方法,详细介绍了基于电化学原理、物理参量和力学损伤的当量折算法,讨论了各种方法的优劣和所适用范围。基于电化学原理的当量加速关系研究方法适合用于制定飞机金属结构加速试验环境谱,以物理参量为基准的当量折算法适用于建立疲劳关键部位、腐蚀关键部位的涂层及金属基体等各种加速试验环境谱的当量加速关系,力学损伤对比法适合用于结构疲劳关键部位。最后得出针对不同材料、不同部位应该采用不同的当量加速关系的结论。     

老龄飞机结构的腐蚀问题与对策

列举了某型老龄飞机腐蚀故障案例,阐明了老龄飞机结构腐蚀的共性问题及特点,从使用寿命期指标体系、结构抗腐蚀品质、服役环境、使用维护与腐蚀修理等方面较系统地分析了老龄飞机结构腐蚀的主要原因和影响因素。重点阐述了老龄飞机结构腐蚀防护对策与措施,主要包括结构腐蚀检查评估、涂层体系改进与结构密封防水改进、外场使用维护中腐蚀预防与控制措施。     

某型飞机腐蚀防护及设计改进

目的针对某型飞机的腐蚀问题开展研究,制定结构腐蚀修理和防腐改进措施。方法对外场飞机的腐蚀情况进行统计归类,对现有飞机防护体系进行梳理,分析结构腐蚀原因和防护体系的不足。在对飞机服役地区环境进行实测的基础上,编制飞机地面停放环境谱和飞机结构局部环境谱。研究制定结构防护体系设计改进措施,并通过加速腐蚀试验验证设计改进效果。结果与结构设计改进前的原始状态相比,防腐改进后的结构日历寿命提高1.6~5倍。结论飞机防护体系薄弱的情况下容易引发多种类型的腐蚀问题;系统地对飞机结构腐蚀问题进行治理,才能取得令人满意的效果。     

城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...     

锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷栽、极限荷栽、荷栽最大值和位移延性系数与钢筋锈蚀率和轴压比的关系.研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试...     

利用煮茧废水培养钝顶螺旋藻的初步研究

本文对缫丝厂煮茧废水和Ｚａｒｒｒｏｕｋ培养基的主要营养成份进行了分析比较，筛选出了适合钝顶螺旋藻（Ｓｐｉｒｕｌｉｎａｐｌａｔｅｎｓｉｓ）在煮茧废水中生长繁殖的培养基和与之相适应的驯化藻种。经室外１５０升煮茧废水扩大培养，干藻生物量可达１６．０３克／米￣２·天，粗蛋白含量达５８．６％，含有１７种氨基酸。比用Ｚａｒｒｏｕｋ培养基培养的螺旋藻产量提高１５．７８％，成本减少８０％以上。培养后的煮茧废水ＣＯＤ和ＢＯＤ＿５浓度低于我国污水综合排放标准。研究结果表明：采用本实验室筛选的煮茧废水培养基和驯化藻种，在煮茧废水中大量培养螺旋藻，实现废水资源化是可行的，具有明显的经济效益和环境效益。     

The impact of handpump corrosion on water quality in rural areas of West African sub-region

Water, even in its natural environment, contains some level of impurities. Water is nearly a universal solvent. It contains dissolved solids and gases, and hosts a number of micro-organisms. The exploitation of groundwater by means of boreholes for supplying small user groups and rural communities with water has been widely applied in certain parts of the world for several decades. In recent years this practice has spread all over the globe, and hundred of thousands of boreholes have beendrilled to tap low-yield aquifers. It is evident that such boreholes require pumps for lifting thewater. In developing countries these are usually handpumps, butsolar as well as other systems with submersible pumps are also used, depending upon the energy sources available and the financial means of the beneficiaries. This article gives a general overview of groundwater quality with regard to itsphysico-chemical composition. The results presented originatefrom the experience gained from handpump equipped boreholes within the UNICEF through German Centre for Technical EducationTransfer executed inter-regional UNDP-Handpumps Project inWest African Regions. Particular attention is paid to presenting corrosion onthe water quality of wells in terms of iron concentrationand other parameters. Furthermore, the corrosion attack ongalvanised iron, the effect of biofilms on the corrosionrate, and the difference between internal and externalcorrosion of rising mains are shown.     

超临界水氧化中设备腐蚀的研究现状

超临界水氧化（SCWO）技术是近年发展起来的处理有机难溶废物的安全高效的新技术。在阐述超临界水的物理、化学性质的基础上，介绍了SCWO反应的工作原理和流程，分析总结了世界范围内开展的SCWO环境中设备腐蚀及监测技术等方面的研究动态，提出了我国SCWO技术研究的未来发展方向。     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

Compostability of Poly(lactide): Degradation in an Inert Solid Medium

Commercial poly(lactide) degradation was studied in an inert solid medium simulating compost conditions, with the aim to achieve a complete carbon balance of the polymer degradation. The mineralisation rate at the end of the test was compared to those obtained for poly(lactide) degradation in compost. It was shown that the mineralisation rate after 45 days of degradation was quite lower in inert solid medium than in compost but the standard deviation of data was enhanced. A protocol for both extraction and quantification of the carbon included in the different degradation by-products was proposed and the carbon balance of the polymer degradation was followed during the test with a satisfactory accuracy. The non-degraded PLA material was recovered during the test, hence the evolution of the glass transition temperature and the molecular weight was followed. A two-step degradation mechanism was highlighted in inert solid medium, showing the fundamental role of abiotic reactions for PLA degradation in compost.