超滤法处理回用印钞厂擦版液的研究

根据擦版液的特性,选择了适合处理擦版液的单皮层内压式中空纤维超滤膜,对超滤过程中的操作压力、料液温度、料液流速和固含量等工艺参数以及清洗药品和方法进行了研究。结果表明,当进口压力为0.17MPa,膜面流速在2,7m/s左右,循环液温度在40℃左右时,透水速度可达到50—60L(m.h)。操作过程中,只用透过液作简单清洗即可使透水速度得到较好的恢复。只有当透水速度衰减严重时,才在70℃条件下进行化学清洗,而且可以使透水速度得到较为彻底的恢复。化学清洗周期至少在1星期以上。     

超滤法处理乳化油废水的研究

采用ＣＭＰＳ,ＰＳ,ＰＳ／ＣＭＰＳ共混,ＰＡＮ,ＰＳ和ＰＤＣ共混中空纤维超滤膜,对乳化油废水进行了超滤实验和比较,探讨了料液流速,操作温度,操作压力,运行时间膜性能的影响,研究了清洗方法对膜性能的恢复效果,试验表明,采用ＣＭＰＳ,ＰＳ／ＣＭＰＳ中空纤维膜处理乳化油废不效果较好,透过液含油量符合生产回用标准（３００ｍｇ／Ｌ）适宜的适宜温度为５０℃,进口压力为０．１２ＭＰａ,出口压力为０．１０ＭＰａ,     

膜-复合式生物反应器组合系统操作条件及稳定运行特性

对膜－复合式生物反应器的操作条件和稳定运行特性进行研究。采用平板式聚丙烯腈超滤膜进行实验,适宜操作压力为０．１５ＭＰａ,适宜膜面流速１．４－１．７ｍ／ｓ,ＨＲＴ至少可以控制在４ｈ,悬浮污泥浓度是影响膜通透量的重要因素之一,适宜值为２－２．５ｇ／Ｌ左右。     

Removal of organic matter and disinfection by-products precursors in a hybrid process combining ozonation with ceramic membrane ultrafiltration

The performance of an integrated process including coagulation, ozonation, ceramic ultrafiltration (UF) and biologic activated carbon (BAC) filtration was investigated for the removal of organic matter and disinfection by-products (DBPs) precursors from micro-polluted surface water. A pilot scale plant with the capacity of 120 m³ per day was set up and operated for the treatment of drinking water. Ceramic membranes were used with the filtration area of 50 m² and a pore size of 60 nm. Dissolved organic matter was divided into five fractions including hydrophobic acid (HoA), base (HoB) and neutral (HoN), weakly hydrophobic acid (WHoA) and hydrophilic matter (HiM) by DAX-8 and XAD-4 resins. The experiment results showed that the removal of organic matter was significantly improved with ozonation in advance. In sum, the integrated process removed 73% of dissolved organic carbon (DOC), 87% of UV₂₅₄, 77% of trihalomethane (THMs) precursors, 76% of haloacetic acid (HAAs) precursors, 83%of trichloracetic aldehyde (CH) precursor, 77% of dichloroacetonitrile (DCAN) precursor, 51% of trichloroacetonitrile (TCAN) precursor, 96% of 1,1,1-trichloroacetone (TCP) precursor and 63% of trichloronitromethane (TCNM) precursor. Hydrophobic organic matter was converted into hydrophilic organic matter during ozonation/UF, while the organic matter with molecular weight of 1000–3000 Da was remarkably decreased and converted into lower molecular weight organic matter ranged from 200–500 Da. DOC had a close linear relationship with the formation potential of DBPs.     

西太湖秋季蓝藻水华过后细胞裂解对溶解性有机碳影响

从2009年7月~2010年3月每月采集西太湖表层水样,分析叶绿素含量﹑蓝藻细胞裂解速率﹑磷酸盐浓度的变化,并通过切向流超滤系统分离得到的高分子量(1kDa~0.5μm)溶解性有机物的碳氮比值和高分子量溶解性有机碳浓度的变化.结果表明,西太湖蓝藻细胞裂解速率在11月达到最大值(0.43d-1),而磷酸盐和高分子量溶解性有机碳浓度分别在12月与9月达到最大值.细胞裂解速率与磷酸盐﹑高分子量溶解性有机碳浓度之间没有相关性,说明水华过后影响磷酸盐浓度﹑高分子量溶解性有机碳的因素很多,蓝藻细胞裂解只是其中重要因素之一.藻类水华的出现可能导致水体中其它磷形态(如有机磷)与磷酸盐之间的迁移转化,而大型浅水湖泊扰动导致的沉积物再悬浮和水华过后频繁的细菌活动都可能是影响高分子量溶解性有机碳的因素.秋季水华过后蓝藻细胞裂解释放的有机碳进入微食物网循环,引起细菌活动频繁,而溶解性有机物中含碳化合物比含氮化合物容易降解,所以碳氮比值逐渐减少.此外细菌通过硝酸盐合成溶解性有机氮也可能是碳氮比值减少的一个重要原因.     

粉末活性炭预处理对超滤膜通量的影响

研究了粉末活性炭预处理对改善超滤膜过滤通量的效果.试验采用了4种具有不同亲疏水性的水样,着重探讨粉末活性炭对有机物的疏水性和亲水性组分的去除效果以及所带来的通量改善.试验结果表明,对于4种水样,超滤膜直接过滤原水时,通量下降严重.虽然粉末活性炭预处理能在一定程度上提高通量,但通量下降的趋势仍未改善.对有机物各组分的分析表明,直接过滤原水时,膜主要截留疏水性有机物;粉末炭吸附主要去除亲水性有机物,而超滤膜过滤粉末炭处理水时,主要截留疏水性有机物.由此,超滤膜的通量下降主要是由疏水性有机物引起的,亲水性组分对通量的影响较小.     

膜法处理低温低浊水技术综述

低温低浊水的处理是给水处理的一个难点.分析了常规混凝方法难处理低温低浊水的原因,介绍和比较了膜处理低温低浊水的4种方法.研究结果表明,膜法出水水质好、稳定,采用低压膜直接过滤降低能耗,节省药剂投加费用;混凝-超滤工艺中加入粉末活性炭后可增加溶解性有机物的去除,膜生物反应器能有效去除氨氮.膜法处理低温低浊水对浊度和有机物的去除明显好于传统工艺,能提供水质良好的饮用水,是低温低浊水处理的发展方向.     

加载絮体形态对短流程超滤膜污染影响效应

以聚硫酸铁（PFS）为混凝剂,微砂为载体颗粒,系统考察了采用加载絮凝-超滤联用工艺净化含高岭土、腐植酸和锑[Sb（Ⅲ）]的模拟原水过程中,不同PFS和微砂投加量条件下加载絮体形态特性以及其对超滤膜通量衰减、膜污染可逆性和宏观出水水质等的影响,并分析了膜污染机理.结果表明,PFS投加量对絮体形态及膜滤效能和膜污染影响显著,且投加量过少或过多均会产生不利影响,以30mg/L为宜;与不投加微砂的工况相比,加入微砂更易于形成大而结构较为松散的絮体,可有效削弱不可逆膜污染,并获得较为稳定的超滤出水水质;超滤末端膜比通量与絮体平均粒径呈良好的正相关性（R²=0.8774）,但因加载絮凝体系中引起分形维数变大的不同类型颗粒（包括小粒径范围絮体和未被加载絮体捕获的微砂）对超滤净水过程产生的影响各异,致使膜通量与分形维数的负相关性较差（R²=0.5760）.     

Aging of PVDF and PES ultrafiltration membranes by sodium hypochlorite: Effect of solution pH

Sodium hypochlorite (NaClO) is a commonly applied cleaning agent for ultrafiltration membranes in water and wastewater treatment. Long-term exposure to NaClO might change the properties and performance of polymeric membranes, and ultimately shorten membrane lifespan. Active species in NaClO solution vary with solution pH, and the aging effects can change depending on the membrane material. In this study, the aging of polyvinylidene fluoride (PVDF) and polyethersulfone (PES) membranes by NaClO at pH 3–11 was investigated by examining variations in chemical composition, surface charge, surface morphology, mechanical strength, permeability, and retention ability. Polyvinyl pyrrolidone (PVP), which was blended in both membranes, was oxidized and dislodged due to NaClO aging at all investigated pH values, but the oxidation products and dislodgement ratio of PVP varied with solution pH. For the PVDF membrane, NaClO aging at pH 3–11 caused a moderate increase in permeability and decreased retention due to the oxidation and release of PVP. The tensile strength decreased only at pH 11 because of the defluorination of PVDF molecules. For the PES membrane, NaClO aging at all investigated pH resulted in chain scission of PES molecules, which was favored at pH 7 and 9, potentially due to the formation of free radicals. Therefore, a decrease in tensile strength and retention ability, as well as an increase in permeability, occurred in the PES membrane for NaClO aging at pH 3–11. Overall, the results can provide a basis for selecting chemical cleaning conditions for PVDF and PES membranes.     

PVC/PES相容性及对共混超滤膜性能的影响

研究了聚氯乙烯(PVC)与聚醚砜(PES)共混体系相容性及其对共混膜性能的影响。利用溶解度参数原则和混合热焓原则进行理论预测,用铸膜液粘度法进行实验表征,均说明该体系为部分相容体系,且其相容性与组成及共混温度有关。通过对共混膜传质特性的考察,表明铸膜液的相容性会明显影响共混膜的性能;采用共混法可以改善膜性能。