双筒型微生物燃料电池生物阴极反硝化研究

利用双筒型微生物燃料电池生物阴极实现电反硝化脱氮,考察外电阻大小、进水硝酸盐和有机物浓度对产电和反硝化的影响.当外电阻从50Ω下降到5Ω,硝酸盐去除速率由0.26 mg/(L.h)上升到0.76 mg/(L.h);在外电阻为5Ω时,亚硝氮积累浓度达55 mg/L;硝酸盐起始浓度在20～120 mg/L时硝酸盐降解满足0级反应,硝酸盐浓度对MFC产电影响不显著;亚硝氮的积累浓度随硝酸盐起始浓度增加而增加,最高可达到35 mg/L;有机物的加入能提高阴极反硝化速度,避免亚硝酸盐积累,对MFC产电影响不大.     

Immunotoxicity of bisphenol a to Carassius auratus Lymphocytes and macrophages following in vitro exposure

Bisphenol A （BPA） is the monomer component of polycarbonate plastics and classified as an endocrine disrupting chemical （EDC）. The reproductive toxicity of BPA has been extensively studied in mammals; however, relatively little information is available on the immunotoxic responses of fish to BPA. In this study, we investigated the effects of BPA on the immune functions of lymphocytes and macrophages in Carassius auratus. The effects of BPA were compared with those of two natural steroid hormones, estradiol and hydrocortisone. Proliferation of the two types of cells in response to PHA was measured using colorimetric MTT assay. Macrophage respiratory burst stimulated by Con A was measured using chemiluminescence assay. Results showed that BPA （0.054-5.4 mg/L）, estradiol （0.0002-2.0 mg/L） and hydrocortisone （5-50 mg/L） significantly induced Carassius auratus lymphocyte proliferation while higher doses of hydrocortisone （500-5000 mg/L） appeared to be inhibitory. BPA （0.005-50 mg/L）, estradiol （0.005-800 mg/L） and hydrocortisone （0.005-500 mg/L） markedly enhanced macrophage proliferation, whereas higher doses of BPA （500-1000 mg/L） appeared to inhibit cell proliferation. Furthermore, higher dosage of BPA （50 mg/L） and hydrocortisone （50 and 500 mg/L） suppressed the macrophages respiratory burst while estradiol is stimulative all the doses tested （0.05-500 mg/L）. In conclusion, BPA could have immunotoxicity to Carassius auratus and functional changes of lymphocyte and macrophage in Carassius auratus may be different between low and high dosages.     

Aerobic degradation of methyl tert-butyl ether by a Proteobacteria strain in a closed culture system

The contamination of methyl ten-butyl ether （MTBE） in underground waters has become a widely concerned problem all over the world. In this study, a novel dosed culture system with oxygen supplied by H2O2 was introduced for MTBE aerobic biodegradation. After 7 d, almost all MTBE was degraded by a pure culture, a member of β-Proteobacteria named as PMI, in a closed system with oxygen supply, while only 40% MTBE was degraded in one without oxygen supply. Dissolved oxygen （DO） levels of the broth in closed systems respectively with and without H2O2 were about 5-6 and 4 mg/L. Higher DO may improve the activity of monooxygemase, which is the key enzyme of metabolic pathway from MTBE to tert-butyl alcohol and finally to CO2, and may result in the increase of the degrading activity of PM1 cell. The purge and trap GC-MS result of the broth in closed systems showed that tea-butyl alcohol, isopronol and acetone were the main intermediate products.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

硅烷热分解法制取工业硅的影响因素分析

现阶段制备工业硅所用的改良西门子方法存在能耗高和污染重的问题,因此寻求能耗低、环境友好型工业硅制备方法是必然趋势。通过硅烷分解实验对硅烷热分解法制备工业硅的几个影响因素做了分析,并简要讨论了各个因素对硅烷热分解的影响。得出硅烷热分解的最佳条件是硅烷浓度0.25%,载气流量为200 L/h,分解温度850℃,分解压强0.35kPa。在此条件下硅的沉积率89.3%。     

毒性有机物BPA与普通小球藻的相互影响特性研究

考察了不同浓度双酚A(BPA)对普通小球藻(Chlorella vulgaris)生长特性的影响,以及普通小球藻生长过程对BPA的去除效能.研究表明,低浓度BPA(0~20 mg·L-1)对普通小球藻生长具有促进作用,而高浓度BPA(20~50 mg·L-1)对普通小球藻生长具有抑制作用,且抑制效应与BPA浓度呈正相关关系.低剂量BPA(<20 mg·L-1)对叶绿素含量并无明显的影响,高剂量BPA(>20 mg·L-1)造成叶绿素含量降低.在BPA初始浓度2~50 mg·L-1的范围内,普通小球藻对其都有一定的去除效能,单位普通小球藻对BPA去除速率与其初始浓度呈正相关关系.BPA投加量为50 mg·L-1时,BPA去除速率最大,且最大速率出现于延滞期与对数期之间.     

湿地基质及阴极面积对人工湿地型微生物燃料电池去除偶氮染料同步产电的影响

本研究采用人工湿地型微生物燃料电池处理偶氮染料X-3B,实现降解偶氮染料同步产电的效果.为了构建性能最优的人工湿地型微生物燃料电池(CW-MFC)系统,本研究主要从湿地基质和阴极面积两个方面研究系统构型对去除X-3B同步产电的影响,提高系统性能.研究表明以粒径10 mm、孔隙率30%的小石子作为湿地基质构造的CW-MFC系统微生物生物量最大,去除X-3B效果最好,脱色率高达92.70%,但其产电性能最差.较小的粒径和孔隙率使底层微生物生物量增加,促进X-3B的去除,但随着湿地基质粒径和孔隙率的减小,导致阴阳极营养物质不足,系统传质阻力增加,抑制了系统产电性能.X-3B的去除效果随着阴极面积的增加而提高直到阴极面积为594 cm~2时取得最大脱色率99.41%.当阴极面积继续增加时,CW-MFC系统产电性能上升趋势趋于平缓,X-3B去除效果呈现下降趋势,这是因为阴极反应过快导致更多的阳极电子输送到阴极用于产生电流,与X-3B发生反应的电子减少,阳极成为提高CW-MFC系统性能的限制因素.     

微生物燃料电池处理含S2-/NH4+废水的研究

以除硫硝化微生物燃料电池(Microbial Fuel Cell,MFC)处理含S~(2-)/NH_4~+的模拟无机废水,研究了不同进水S~(2-)浓度下MFC的产电性能、污染物去除效果和阳极室硫累积情况.结果表明,除硫硝化MFC可实现同步阳极除硫和阴极硝化,并通过非生物电化学作用和生物电化学作用共同产电.进水S~(2-)浓度为(60.8±2.9)、(131.7±2.4)、(161.7±4.5)和(198.1±3.1)mg·L~(-1)时,最佳阳极碳刷清洗周期分别为3、3、3、4个换水周期,前3个进水浓度下的换水周期可分别缩短为6、8和8 h.MFC阴极硝化完全,不受进水S~(2-)浓度影响,但氧从阴极向阳极的渗漏导致阳极库仑效率较低(40%).适当增加进水S~(2-)浓度可增强MFC的产电性能并提高S~(2-)去除负荷和颗粒硫累积比.除硫硝化MFC适宜的进水S~(2-)浓度为(161.7±4.5)mg·L~(-1),相应的最大功率密度为5.77 W·m~(-3),周期产电量为(141.0±5.2)C,S~(2-)去除负荷为(0.31±0.00)g·L~(-1)·d~(-1),颗粒硫累积比达58%.阳极碳纤维丝上沉积有粒径约100 nm的颗粒硫.阳极悬浮物与沉积物相比,悬浮物中S0含量比例较高,而S6+含量比例较低.     

桉树叶提取液还原石墨烯电极提高微生物燃料电池产电性能的研究

将桉树叶提取液绿色还原氧化石墨烯(G-rGO)电极和微生物还原氧化石墨烯(B-rGO)电极依次作为微生物燃料电池(MFC)阳极,采用红外光谱(FTIR)、X射线衍射(XRD)、扫描电镜(SEM)对所制备的电极进行表征,并采用循环伏安法(CV)、交流阻抗法(EIS)对比2种电极的电化学性能.结果发现,G-rGO阳极的内阻为243.87Ω,应用于MFC时最大功率密度和最大输出电压分别为18.77 W·m~(-3)和760 mV,对照组B-rGO电极的内阻为299.11Ω,将其应用于MFC时最大功率密度和最大输出电压分别为13.16 W·m~(-3)和635 mV,对照组未修饰阳极的内阻为375.21Ω,最大功率密度和最大输出电压分别为8.97 W·m~(-3)和480 mV.研究表明,G-rGO电极电阻更小,导电性能更优越.