Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

大型空间环境模拟器真空系统配置技术研究

分别对国内外大型空间环境模拟器的真空系统配置进行了介绍,并对真空系统各个子系统的配置与技术特点进行了分析,重点针对大型空间环境模拟器真空系统中所需的真空抽气策略进行了研究,为后续超大型环境试验设备的研制和试验测试提供了参考。     

含弹内埋弹舱缩尺模型气动噪声特性研究

目的对含弹的内埋弹舱模型进行噪声仿真和试验研究。方法计算采用"CFD+CAA"的混合方法,采用DDES计算流场,基于M?hring声学类比方法得到测量点的噪声信息。采用该方法与空腔M219标准试验结果进行对比。内埋弹舱吹风试验在全消声室中进行,并采用传声器阵列识别主要噪声源。结果计算与试验得到的不同来流条件下,不同测量点的噪声频谱曲线基本一致。弹舱内最大声压级出现在中间弹翼附近的侧壁上,与声源识别的主要噪声源的位置一致。结论该研究可为内埋弹舱的设计提供参考和技术支持。     

Study on the effect of porous fence on air quality and traffic noise level around a double-decked road structure

Fence for traffic noise control sometimes causes adverse effect on air pollution. Thus in this study, performance of porous fence as a tool for control of both air pollution and noise pollution was evaluated. A two-dimensional numerical model for flow and pollutant concentration and an analytical model for traffic noise were utilized in the analysis of a double-decked road structure with fences only at ground (Case 1) and at both ground and upper deck (Case 2). Porous fences were assumed only at the ground level since the solid fences at the upper deck usually leads to desirable result on air pollution. Effects of the variable porosity on air quality and noise level near road were evaluated. Obtained results showed: (1) flow pattern in leeward of fence was drastically changed at 40–50% porosity in Case 1 and 50% in Case 2. The porosity larger than 40% excluded presence of a circulation behind the fence. (2) Effect of porous fence on air pollution was different in Cases 1 and 2. In Case 1, the porous fence generally resulted in the reduction of air pollution at the ground level; on the other hand, in Case 2, it rather led to increase of the concentration. (3) Traffic noise level was also largely changed by the porosity of the fence; an example of simultaneous evaluation of the effects of porous fence on both air and noise pollution in Case 1 showed that the fence of 60% porosity leads to reduction of air pollution by 20% compared with solid fence case, and reduction of noise pollution by 4–6% in dB compared with no fence case, at l m high and 10 m from the road.     

ADMS模型解析城区总悬浮颗粒物来源

以污染源排放数据为基础,应用ADMS-城市扩散模型模拟分析了鞍山市尘各污染源对空气环境质量的贡献。结果表明,来自污染源的浓度贡献值占总量的52%;二次尘及外来尘浓度贡献占48%;矿山开采二次尘的浓度贡献占16%;鞍钢炼铁厂的浓度贡献占19.6%;鞍钢化工总厂浓度贡献占5.6%;供暖锅炉浓度贡献占9.3%。低、中、高架源浓度贡献百分比分别为68.1%、29.0%、2.9%。低架源吨排放量浓度贡献为高架源的2.4倍。     

金属体积成形过程有限元模拟中六面体网格重划技术的研究

针对金属体积成形过程有限元模拟中的网格重划问题 ,提出了基于边界构形的有限元网格重划技术 ,并对其中的一系列技术处理进行了详尽的讨论。将该技术应用于矩形块体镦粗过程的有限元模拟中 ,较好地解决了六面体网格重划问题。     

汕头港水域温排水热扩散的三维数值模拟

本文建立了汕头港水域温排水扩散的三维数学模型，并采用特征差分方法求其解，对该法在三维情况下的稳定作了推导，给出了判断公式，上述模型被应用于汕头热电厂废热水排放的环境影响评价中，实例计算表明，该模型算法程序简单，计算结果合理。     

Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

新疆D矿田金矿资源定量评价

本文在建立D矿田找矿信息层次模型基础上,确定矿田统计单元划分和地质变量提取的赋值原则,将该矿田划分出466个统计单元,提取25个地质变量并进行二态赋值,而后应用数量化理论Ⅲ。特征分析法及勃尔法等方法,建立了矿田金矿资源定量评价模型,定位预测了45个勘探靶区。