利用餐饮业废油脂制造生物柴油

世界的石油产量将会逐渐减少，石化柴油燃烧后所排放的废气是造成的城市空气污染的主要原因，生物柴油是石化柴油很好的替代能源，文章介绍了国外废油脂处理利用和甸餐饮业废油脂的概况，提出了利用餐饮业废油脂制造生物柴油的方法和工艺流程，并讨论了利用餐饮业废油脂制造生物柴油的几个问题。     

NaOH溶液吸收CO2的试验研究

为了满足国际海事组织对船舶CO2排放的要求,建立了一种针对船舶尾气CO2的循环吸收系统,利用NaOH溶液吸收CO2.NaOH溶液完成第一步吸收反应后在第二步反应中被还原,从而可以循环利用.分析了初始反应温度、NaOH浓度及溶液中的Na2CO3对CO2吸收率的影响,并计算了循环反应中NaOH的再生率和CaO的过量系数.结果表明,CaO过量系数为1.2时对CO2固化效果最佳,此时NaOH溶液再生率达79.31％.研究表明,NaOH溶液吸收船舶尾气中CO2的循环系统效率高、成本低.     

Modelling and Prediction of Diesel Engine Performance using Relevance Vector Machine

Diesel engines are being increasingly adopted by many car manufacturers today, yet no exact mathematical diesel engine model exists due to its highly nonlinear nature. In the current literature, black-box identification has been widely used for diesel engine modelling and many artificial neural network (ANN) based models have been developed. However, ANN has many drawbacks such as multiple local minima, user burden on selection of optimal network structure, large training data size, and over-fitting risk. To overcome these drawbacks, this article proposes to apply an emerging machine learning technique, relevance vector machine (RVM), to model and predict the diesel engine performance. The property of global optimal solution of RVM allows the model to be trained using only a few experimental data sets. In this study, the inputs of the model are engine speed, load, and cooling water temperature, while the output parameters are the brake-specific fuel consumption and the amount of exhaust emissions like nitrogen oxides and carbon dioxide. Experimental results show that the model accuracy is satisfactory even the training data is scarce. Moreover, the model accuracy is compared with that using typical ANN. Evaluation results also show that RVM is superior to typical ANN approach.     

pH-dependent leaching behaviour and other performance properties of cement-treated mixed contaminated soil

Portland cement has been widely used for stabilisation/solidification (S/S) treatment of contaminated soils. However, there is a dearth of literature on pH-dependent leaching of contaminants from cement-treated soils. This study investigates the leachability of Cu, Pb, Ni, Zn and total petroleum hydrocarbons (TPH) from a mixed contaminated soil. A sandy soil was spiked with 3000 mg/kg each of Cd, Cu, Pb, Ni and Zn, and 10,000 mg/kg of diesel, and treated with ordinary Portland cement (CEM I). Four different binder dosages, 5%, 10%, 15% and 20% (m/m) and different water contents ranging from 13%-19% dry weight were used in order to find a safe operating envelope for the treatment process. The pH-dependent leaching behaviour of the treated soil was monitored over an 84-day period using a 3-point acid neutralisation capacity (ANC) test. The monolithic leaching test was also conducted. Geotechnical properties such as unconfined compressive strength (UCS), hydraulic conductivity and porosity were assessed over time. The treated soils recorded lower leachate concentrations of Ni and Zn compared to the untreated soil at the same pH depending on binder dosage. The binder had problems with Pb stabilisation and TPH leachability was independent of pH and binder dosage. The hydraulic conductivity of the mixes was generally of the order, 10^-8 m/sec, while the porosity ranged from 26%-44%. The results of selected performance properties are compared with regulatory limits and the range of operating variables that lead to acceptable performance described.     

Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) × 10⁸ cm^-3. The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 × 10⁶ cm^-3 and 2.7 × 10⁷ cm^-3 under decelerating and idling operations and as high as 5.0 × 10⁸ cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.     

掺甲醇汽油对国III汽油机排放性能影响

在一台整车试验满足国III排放法规要求的多点电喷汽油机上,采用甲醇掺入汽油的混合燃料（甲醇的体积分数分别为0%、15%和50%）进行台架试验,使用傅里叶变换红外光谱分析仪（FTIR）在线检测了常规车用三效催化转化器前后的常规和非常规排放.研究结果表明：怠速工况下,掺醇燃料对NOx排放基本没有影响,但CO和HC随掺醇比增加而普遍降低,非常规排放中乙醛排放有所降低,甲醇和甲醛则随掺醇比的增加有较大幅度升高,热怠速时经催化后掺醇燃料对各种排放均无影响,可被控制在极低的水平;其它工况下,随掺醇比增加,CO和HC减少,NOx在高掺醇比下低速低负荷和高速高负荷时有较为明显的改善,非常规排放甲醛和甲醇排放随掺醇比增大而急剧增加,乙醛排放则随之减少.经三效催化转化器作用,无论常规排放NOx、CO和HC,还是非常规排放甲醛、甲醇和乙醛基本上能够实现零排放.     

某涡轮风扇发动机试车台的声环境研究

涡轮风扇发动机试车台空气流量大,试车噪声呈宽带强噪声,其中突出的低频域噪声可远距离传播,易造成大范围的环境污染。为掌握某型涡轮风扇发动机在室内试车时的噪声特性,并检验试车台建筑物和各项降噪设备的效果,我们对新建试车台的声环境进行了测量。通过对该试车台内、外环境噪声数据的分析,表明新建试车台的声环境满足了我国有关规范的要求。本次研究工作对今后试车台的声学设计具有重要的借鉴意义。     

成都市典型非道路工程机械排气烟度分析

采用不透光烟度计采集了成都市典型工程机械(挖掘机、装载机、叉车和压路机)排气烟度,研究了机械功率对其活动水平(燃油消耗量和年均工作时间)的影响,同时也研究了机械发动机构造和机械排放标准对其排气烟度的影响;同时,采用氮硫测定仪分析了机械油品硫含量,研究了硫含量对其排气烟度的影响.试验结果表明:机械功率越大的工程机械,燃油消耗量和年均工作时间数越高.成都典型工程机械排气烟度排放水平最低的为装载机,最高的为压路机;同时,超高排放装载机与叉车的占比较高.工程机械排气烟度受机械发动机排量、机械发动机构造、机械发动机排放标准和机械用油的综合影响,通过对工程机械装配电控发动机、提高原机排放标准和使用低硫燃油均能直观反映出机械排气烟度不同程度的改善.此外,油品中硫含量越高,机械排气烟度越大.     

Emission of intermediate volatility organic compounds from a ship main engine burning heavy fuel oil

Intermediate volatility organic compounds (IVOCs) are crucial precursors of secondary organic aerosol (SOA). In this study, gaseous IVOCs emitted from a ship main engine burning heavy fuel oil (HFO) were investigated on a test bench, which could simulate the real-world operations and emissions of ocean-going ships. The chemical compositions, emission factors (EFs) and volatility distributions of IVOC emissions were investigated. The results showed that the main engine burning HFO emitted a large amount of IVOCs, with average IVOC EFs of 20.2–201?mg/kg-fuel. The IVOCs were mainly comprised of unspeciated compounds. The chemical compositions of exhaust IVOCs were different from that of HFO fuel, especially for polycyclic aromatic compounds and alkylcyclohexanes. The volatility distributions of IVOCs were also different between HFO exhausts and HFO fuel. The distinctions in IVOC emission characteristics between HFO exhausts and HFO fuel should be considered when assessing the IVOC emission and related SOA formation potentials from ocean-going ships burning HFO, especially when using fuel-surrogate models.     

SIL评估技术在柴油加氢装置的应用

介绍了安全仪表系统安全完整性等级(SIL)评估方法,并将SIL评估技术在柴油加氢装置进行应用,系统全面分析了装置安全仪表系统的可靠性,并提出合理可行的建议措施,对于提高装置安全稳定运行水平具有重要作用。