生活污水处理厂污泥处置技术研究

针对生活污水处理厂污泥处置技术,介绍了国内外污泥的处理现状,提出了传统的污泥处置技术,主要是海洋倾倒,污泥消化技术法,污泥堆肥技术法,污泥的土地利用和污泥的有效利用法,给出林地利用与绿化利用随着污泥量的增长,污泥的处置越来越来受到人们的关注。介绍了国内外污泥处理现状和传统污泥处理处置方法,分析了污泥稳定和资源化处置技术及应用进展,提出了污泥堆肥和堆肥后污泥的土地利用是符合中国国情的污泥处置与资源化利用途径。     

电极移动速度效应检测仪系统的研究

分析了国际静电放电测试研究领域现有的各种测试研究装置特点，为克服已有测试装置缺陷本团队研发设计出一种全新的静电放电测试研究系统—电极移动速度效应检测仪。对其结构设计特点、功能进行了分析。我们研制的新型静电放电测试系统兼具实现真实直线运动准确调节和多环境因素可控的优点，彻底解决了困扰国际电磁兼容静电放电研究领域电极需高速向靶移动放电与避免强烈撞击损坏仪器的难题，实现了对多种因素影响逐一准确控制，为静电放电性质更为深入广泛的研究提供了新的手段和平台。     

反应气耦合等离子体降解沙林模拟剂

采用水蒸气、氨气、过氧化氢气雾和臭氧4种气体对沙林模拟剂氟磷酸二异丙酯(DFP)进行降解研究,发现臭氧对DFP具有较好的降解作用,在流量200 L/h,DFP初始浓度50 mg/m3时,降解率最高可达56.1%。对高浓度DFP(大于80 mg/m3)进行降解研究时,等离子体单独作用最高降解率为89%,而添加臭氧后的降解率都在95%以上。计算得到臭氧作用的能量利用率为0.05 mg/(W·h),等离子体的能量利用率为0.55 mg/(W·h),而添加臭氧后的等离子体能量利用率为0.68 mg/(W·h)明显高于臭氧和等离子体能量利用率之和,因此对高浓度DFP进行处理时,臭氧与等离子体存在耦合作用。对等离子体和臭氧耦合等离子体降解DFP反应进行了产物分析,发现主要的降解产物基本一致,但是臭氧的存在能使降解更加彻底。     

Estimating Plecoglossus altivelis altivelis migration using a mass balance model expressed by hydrological distribution parameters in a major limpid river basin in Japan

We examined the influence of several hydrological and meteorological parameters on the migratory movements of ayu Plecoglossus altivelis altivelis in central Japan. When comprehensively evaluating rivers and ayu behaviour on a catchment scale, the subjects of analysis typically include human activities and hydrological and meteorological phenomena. However, limiting analyses to such factors may be too restrictive when human activities are being conducted. Accordingly, we incorporated a biological viewpoint into the evaluation method, analysing hydrological data (river discharge, river water temperature, sea water temperature) to determine watershed characteristics and examining the relationship between these characteristics and the habitat conditions of ayu. Then we constructed a numerical model for ayu migratory runs that incorporated ayu ecology and watershed characteristics. Analyses of ayu movements from a lower estuarine dam demonstrated that downstream displacements were associated with high water flows of more than 200 m³ s⁻¹ at the beginning of summer. We conclude that it is important to consider the effects of environmental parameters on the movements of different fish species to understand the causes of spatial variation in fish distribution in lowland rivers.     

Modeling Postfire Response and Recovery using the Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS)1

Abstract: This paper investigates application of the Army Corps of Engineers’ Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS) to a burned watershed in San Bernardino County, California. We evaluate the HEC‐HMS’ ability to simulate discharge in prefire and postfire conditions in a semi arid watershed and the necessary parameterizations for modeling hydrologic response during the immediate, and subsequent recovery, period after a wildfire. The model is applied to City Creek watershed, which was 90% burned during the Old Fire of October 2003. An optimal spatial resolution for the HEC‐HMS model was chosen based on an initial sensitivity analysis of subbasin configurations and related model performance. Five prefire storms were calibrated for the selected model resolution, defining a set of parameters that reasonably simulate prefire conditions. Six postfire storms, two from each of the following rainy (winter) seasons were then selected to simulate postfire response and evaluate relative changes in parameter values and model behavior. There were clear trends in the postfire parameters [initial abstractions (I_a), curve number (CN), and lag time] that reveal significant (and expected) changes in watershed behavior. CN returns to prefire (baseline) values by the end of Year 2, while I_a approaches baseline by the end of the third rainy season. However, lag time remains significantly lower than prefire values throughout the three‐year study period. Our results indicate that recovery of soil conditions and related runoff response is not entirely evidenced by the end of the study period (three rainy seasons postfire). Understanding the evolution of the land surface and related hydrologic properties during the highly dynamic postfire period, and accounting for these changes in model parameterizations, will allow for more accurate and reliable discharge simulations in both the immediate, and subsequent, rainy seasons following fire.     

Sensitivity and Uncertainty of Ground‐Water Discharge Estimates for Semiarid Shrublands1

Abstract: We proposed a step‐by‐step approach to quantify the sensitivity of ground‐water discharge by evapotranspiration (ET) to three categories of independent input variables. To illustrate the approach, we adopt a basic ground‐water discharge estimation model, in which the volume of ground water lost to ET was computed as the product of the ground‐water discharge rate and the associated area. The ground‐water discharge rate was assumed to equal the ET rate minus local precipitation. The objective of this study is to outline a step‐by‐step procedure to quantify the contributions from individual independent variable uncertainties to the uncertainty of total ground‐water discharge estimates; the independent variables include ET rates of individual ET units, areas associated with the ET units, and precipitation in each subbasin. The specific goal is to guide future characterization efforts by better targeting data collection for those variables most responsible for uncertainty in ground‐water discharge estimates. The influential independent variables to be included in the sensitivity analysis are first selected based on the physical characteristics and model structure. Both regression coefficients and standardized regression coefficients for the selected independent variables are calculated using the results from sampling‐based Monte Carlo simulations. Results illustrate that, while as many as 630 independent variables potentially contribute to the calculation of the total annual ground‐water discharge for the case study area, a selection of seven independent variables could be used to develop an accurate regression model, accounting for more than 96% of the total variance in ground‐water discharge. Results indicate that the variability of ET rate for moderately dense desert shrubland contributes to about 75% of the variance in the total ground‐water discharge estimates. These results point to a need to better quantify ET rates for moderately dense shrubland to reduce overall uncertainty in estimates of ground‐water discharge. While the approach proposed here uses a basic ground‐water discharge model taken from an earlier study, the procedure of quantifying uncertainty and sensitivity can be generalized to handle other types of environmental models involving large numbers of independent variables.     

等离子气化技术在垃圾处理中的应用

等离子气化技术已经在国外成功应用多年,其用于解决日益增多的垃圾问题,可将废物转化成有用的资源。本文介绍了等离子气化技术的优点、经济性,以及其在垃圾处理中的应用。     

吸附增效低温等离子体法去除甲苯废气的研究

采用150Hz中频高压交流电源作为低温等离子体发生源,选用典型的微孔γ-Al2O3球形颗粒吸附剂(以下简称γ-Al2O3)作为等离子体反应器填充材料,协同低温等离子体法催化降解甲苯废气。考察了在不同条件下,γ-Al2O3的甲苯吸脱附效果和吸附增效低温等离子体法的甲苯去除效果。结果表明,甲苯降解反应主要发生在γ-Al2O3的表面,甲苯的去除率在一定的浓度范围内与γ-Al2O3表面吸附的甲苯量成正比关系;填充γ-Al2O3有利于提高甲苯去除率及等离子体反应器能量利用率;γ-Al2O3对臭氧的降解表现出一定的促进作用。     

氧活性粒子氧化NO生成HNO_3

采用强电离介质阻挡放电方法制取高浓度氧活性粒子(O+2、O3)并注入气体外排烟道中,实现O+2、O3氧化NO转化成资源酸(HNO3)的等离子化学反应。描述强电离放电的氧活性粒子产生器,讨论烟道中O+2、O3氧化NO成HNO3等离子体反应机制,分析回收酸液的NO-2、NO-3离子种类及浓度。考察强电离放电等离子体源的输入功率、水体积百分比、气体温度、气体流速对NOx氧化率的影响。氧化率为97.2%的最佳实验条件是:O+2浓度为1.38×1010个/cm3,O3浓度为210 mg/L,烟气温度为65℃,H2O体积浓度为5.6%,停留时间为0.94 s。     

降低超高压输电线路电晕噪声的对策研究

从电力金具的选型、设计、生产、运输、安装和优化改造等环节提出了降低超高压输电线路电晕噪声的对策措施。同时，通过对超高压输电线路铁塔可听噪声和金具电晕放电情况的检测，验证优化改造金具的降噪效果，查找金具安装的缺陷和漏洞，为金具制造和设计、预防电晕措施的选择及电力金具的改良、安装和运行等方面提供决策和参考依据。