废塑料催化裂解生成汽柴油中试工艺的研究

研究开发了一套废塑料催化裂解一次转化成汽、柴油的中试装置 ,可日产汽、柴油 2 t,能够实现进料、出油和排渣的连续化操作。裂解反应器具有传热效果好、生产能力大的特点。试验结果表明 :在催化剂加入量为 1%～ 3%、反应温度为 35 0～ 380℃条件下 ,汽油和柴油的总收率可达 70 %以上 ;由废聚乙烯、废聚丙烯和废聚苯乙烯炼制的汽油辛烷值分别为 72、77和 86 ,柴油的凝固点分别为 3℃、-11℃和 -2 2℃。该工艺操作安全 ,无“三废”排放。     

我国一次性塑料污染管理对策研究

一次性塑料垃圾对生态环境和人体健康的危害已经引起国际社会的广泛关注,加强一次性塑料的管理正逐步成为人类的共识,也是我国塑料生产和使用过程中面临的重要现实问题.通过对世界各国和地区一次性塑料管理措施进行系统梳理,归纳出目前出台的相关政策措施主要有征税、自愿协议、全部或部分禁止、禁令和征税并行4类.对我国一次性塑料管理现状进行总结发现,我国当前针对一次性塑料的管理政策存在分散性以及滞后性等问题,尚未达到系统化.借鉴国际经验,在我国现存制度的基础上,针对一次性塑料制品的生产、使用和回收处理的全生命周期过程,提出完善我国一次性塑料污染的管理对策:①源头管理措施包括分阶段、分领域限制和禁止使用一次性塑料,使用税收等经济工具将一次性塑料垃圾外部成本内部化,探索替代品实现一次性塑料使用减量化;②使用过程的管理主要是通过提高一次性塑料的使用次数从而达到减量化使用的目的;③末端管理措施包括完善一次性塑料垃圾产生者责任制,提高垃圾回收中一次性塑料分拣效率和加快技术创新、促进再生利用等;④加强公众参与,提高公众减少使用一次性塑料制品的环境意识,这也是一次性塑料全生命周期管理体系的重要组成部分.      

Separation of polycarbonate and acrylonitrile–butadiene–styrene waste plastics by froth flotation combined with ammonia pretreatment

The objective of this research is flotation separation of polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS) waste plastics combined with ammonia pretreatment. The PC and ABS plastics show similar hydrophobicity, and ammonia treatment changes selectively floatability of PC plastic while ABS is insensitive to ammonia treatment. The contact angle measurement indicates the dropping of flotation recovery of PC is ascribed to a decline of contact angle. X-ray photoelectron spectroscopy demonstrates reactions occur on PC surface, which makes PC surface more hydrophilic. Separation of PC and ABS waste plastics was conducted based on the flotation behavior of single plastic. At different temperatures, PC and ABS mixtures were separated efficiently through froth flotation with ammonia pretreatment for different time (13 min at 23 °C, 18 min at 18 °C and 30 min at 23 °C). For both PC and ABS, the purity and recovery is more than 95.31% and 95.35%, respectively; the purity of PC and ABS is up to 99.72% and 99.23%, respectively. PC and ABS mixtures with different particle sizes were separated effectively, implying that ammonia treatment possesses superior applicability.     

纳米羟基磷灰石对电子垃圾拆解地农田土壤Pb生物可利用性的影响

为了研究钝化剂对电子垃圾拆解地农田土壤中重金属Pb生物可利用性的影响,采用盆栽试验,在种植油菜和白菜的土壤中加入不同质量比的纳米羟基磷灰石(n-HAP),研究Pb形态、油菜和白菜生物量、油菜和白菜中Pb的累积量,评价纳米羟基磷灰石对Pb生物可利用性的影响.结果表明,加入5 g/kg、10 g/kg、15 g/kg、20 g/kg和25 g/kg纳米羟基磷灰石后,油菜和白菜生物量增加,且油菜生物量大于白菜生物量;油菜内Pb累积量小于白菜内Pb累积量;土壤中残渣态Pb质量比增加,可交换态Pb质量比减少,有效态Pb质量比与Pb生物可利用性显著降低(p＜0.05),与对照组相比,种植油菜和白菜土壤中Pb的生物可利用性分别降低了25.53％～82.77％和45.79％～71.68％.当纳米羟基磷灰石质量比为20g/kg时,油菜和白菜生物量较大,而且对Pb的累积量最低,种植油菜和白菜土壤中Pb的生物可利用性分别降低了81.84％和70.89％.研究表明,纳米羟基磷灰石的适宜投加量为20g/kg,而油菜为理想植物.     

废弃印刷电路板回收拆解过程中的气体排放物分析

为研究废弃印刷电路板(PCB)在回收加热拆解电子元件过程中所产生的气体排放物的主要成分,使用自行设计的废弃PCB拆解装置进行拆解实验,采用傅里叶红外光谱(FTIRS)、气相色谱-质谱(GC/MS)、离子色谱(IC)和电感耦合等离子体质谱(ICP-MS)等分析方法,对实验过程所收集到的气体产物进行成分分析.结果表明,废弃PCB的基板在加热过程中发生了初步分解,基板上的溴化环氧树脂发生了O—C、C—C、C—Br键的断裂,产生了苯酚、2,6-二溴苯酚等有机物;伴随有机气体逸出的还有废弃PCB在加热过程所释放的含有大量S、N、Cl、Br等元素的无机酸性气体;而连续的熔锡过程还使得PCB与焊料中的Sn、Pb、Sb、Hg、Cd、Cr等重金属产生烟尘逸出.     

Microtox assay to determine the toxicity of degradation products from degradable plastics

Six types of starch-polyethylene degradable plastics were evaluated for the release of water-soluble toxic compounds under accelerated degradation conditions. A plastic strip (2.5×15.2 cm) was placed in a 250-ml Erlenmeyer flask with 100 ml of ASTM type I water with or without trace element solutions and shaken at 65°C and 110 rpm for 20 weeks in replicates of two. High temperature was used to accelerate the oxidative degradation of polyethylene. Plastic degradation was measured by loss of tensile strength, percentage elongation, strain energy, and weight-average molecular weight. The most rapid period of polyethylene thermal degradation was complete for most materials by day 28. Ten-milliliter aqueous samples were removed from each flask at days 1, 7, 28, 56, 84, and 140 (water volumes were maintained at 100 ml with fresh type I water), filtered through glass filters, then evaluated by using the Microtox Toxicity Analyzer (Microbics Corporation, Carlsbad, CA). No water-soluble toxic compounds were detected during the period of rapid film degradation. Toxicity was observed at day 28 for one film and at day 84 for all films, which could possibly correlate with the release of small oxidative compounds such as formaldehyde and acetaldehyde. Because of the sensitivity of this assay, positive results must be confirmed by otherin vitro studies.Journal Paper No. J-14851 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Projects No. 2889 and 0178.     

Degradation studies of novel degradable starch-polyethylene plastics containing oxidized polyethylene and prooxidant

Linear low-density polyethylene films were prepared that contained native corn starch (7, 14, or 28%), low or high molecular weight oxidized polyethylene (15%), and a prooxidant mixture (18% POLYCLEAN II) that contains manganese and vegetable oil. For each mixture all components were first mixed at high temperatures in a twin-screw extruder and pelletized. The pellets were cast into films using a single-screw extruder. Oxidized-polyethylene addition did not impair the transparency and thickness of the films and did not reduce the percentage elongation, whereas significant reductions in film mechanical properties were observed. Thermal and photodegradation properties of each film were evaluated by 70°C forced-air oven treatment (20 days), by high-temperature, high-humidity treatment in a steam chamber (20 days), and by exposure to ultraviolet light (365 nm; 4 weeks). Changes in the mechanical properties of the films were determined by an Instron Universal Test Machine; in the carbonyl index, Fourier transform infrared spectroscopy; and in molecular weight, by high-temperature gel-permeation chromatography (HT-GPC). The addition of oxidized polyethylene, especially high molecular weight oxidized polyethylene, and up to 14% starch to the films significantly increased the rate of thermal and photodegradation.Journal Paper No. J-15363 of the Iowa Agriculture and Home Economics Experiment Station, Ames. Project No. 0178 and 2889.     

可降解塑料生物降解性测试方法研究

通过对３种可陈解塑料生物降解性测试方法进行的实验研究，分析了各种方法的优缺点，对将来开发合理可行的标准测试方法提出了建议。     

废旧塑料综合利用技术的应用

废旧塑料的回收利用是环境污染控制所面临的一个重要课题,近年来,人们在这方面进行了大量的研究工作,取得了很多成果.详细叙述了国内外废旧塑料回收处理的方法,分析了我国在废旧塑料回收利用方面的现状及存在的问题,并对如何进一步开展废旧塑料回收利用工作提出了一系列切实可行的建议.