Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Evaluating the effectiveness of marine actinobacterial extract and its mediated titanium dioxide nanoparticles in the degradation of azo dyes

Aim of the present study was to synthesize titanium dioxide nanoparticles （YiO2 NPs） from marine actinobacteria and to develop an eco-friendly azo-dye degradation method. A total of five actinobacterial isolates were isolated from Chennai marine sediments, Tamilnadu, India and analyzed for the synthesis of TiO2 NPs using titanium hydroxide. Among these, the isolate PSV 3 showed positive results for the synthesis of TiO2 NPs, which was confirmed by UV analysis. Further characterization of the synthesized TiO2 NPs was done using XRD, AFM and FI＇-IR analysis. Actinobacterial crude extract and synthesized TiO2 NPs was found efficient in degrading azo dye such as Acid Red 79 （AR-79） and Acid Red 80 （AR-80）. Degradation percentage was found to be 81% for AR-79, 83% for AR-80 using actinobacterial crude extract and 84% for AR-79, 85% for AR-80 using TiO2 NPs. Immobilized actinobacterial ceils showed 88% for AR-79 and 81% for AR- 80, dye degrading capacity. Degraded components were characterized by FT-IR and GC-MS analysis. The phytotoxicity test with 500 μg/mL of untreated dye showed remarkable phenotypic as well as cellular damage to Tagetes erecta plant. Comparatively no such damage was observed on plants by degraded dye components. In biotoxicity assay, treated dyes showed less toxic effect as compared to the untreated dyes.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

Myrothecium verrucaria NF-08产漆酶条件的响应面法优化及粗酶染料脱色研究

以半知菌属疣孢漆斑菌Myrothecium verrucaria NF-08为供试菌,采用响应面方法优化菌株产漆酶条件,并以其漆酶粗酶进行3种结构类型6种染料的脱色试验,考察了粗酶浓度、温度和p H值对脱色率的影响.两水平析因设计、中心组合设计和验证试验结果表明:葡萄糖浓度为15.4 g·L~(-1)、蛋白胨浓度为43.3 g·L~(-1)和培养基初始p H值为6.68时,漆酶活性达到最大值(25.58±1.60)U·m L~(-1),是单因素试验(16.82 U·m L~(-1))的1.52倍,提高了52.1%.以上述发酵条件获得的M.verrucaria NF-08漆酶粗酶对3种结构类型染料均有脱色效果,排序为偶氮类优于芳甲烷类优于蒽醌类.脱色率随粗酶浓度增大(2~8 U·m L~(-1))、反应温度升高(15~35℃)而上升,随p H值上升(4~10)而下降.粗酶浓度为5 U·m L~(-1),反应温度为25℃,p H值为4时,偶氮类染料铬黑T和芳甲烷类染料碱性品红即可几乎完全脱色,脱色率分别为99.2%和94.6%.     

Effect of tracer dyes on initial deposits and persistence of bacillus thuringiensis subsp. kurstaki toxin after application of two commercial formulations onto spruce trees

Abstract

The effect of two tracer dyes [Erio Acid Red (EAR) and Acid Black 48 (AB‐48)] on initial deposits and persistence of Bacillus thuringiensis subsp. kurstaki (Btk) toxin (delta‐endotoxin) was studied after spraying two commercial formulations, Foray® 48B and Foray® 76B, over potted white spruce [Picea glauca (Moench) Voss] seedlings, at a dosage rate of 30 billion international units (BIU) per ha. Spray was applied using a spinning disc atomizer calibrated to deliver droplet sizes similar to those utilized in ultra‐low‐volume (ULV) treatments in operational insect control programs. The sprayed seedlings were left outdoors at the Sault Ste. Marie laboratory for 18 days under natural conditions of sunlight, wind and rainfall. Initial deposits and persistence of delta‐endotoxin protein in spruce foliage were determined by immunoassay [enzyme linked immunosorbent assay (ELISA)] quantification of the delta‐endotoxin. The total protein (inactive plus active) and delta‐endotoxin (active protein) concentrations in the two formulations were determined by a gravimetric procedure and by ELISA respectively.

The initial deposit levels of the toxin on foliage were not markedly affected by the addition of either of the two tracer dyes, and showed only a narrow range of 1521 to 1625 ng/g foliage (fresh weight) for Foray 48B, and 1789 to 2056 ng/g for Foray 76B. However, the persistence of the toxin was significantly influenced by the presence of the dyes. The toxin persisted in foliage only for 7 d post‐spray When the EAR dye was added to Foray 48B, compared to 10 d when no dye was added. The average half‐life (DT₅₀) of disappearance was 17.4 h for Foray 48B with EAR, and 20.9 h when no dye was present. In contrast, the situation was reversed in Foray 76B, since the duration of persistence was 10 d when EAR was added to Foray 76B, compared to 7 d when no dye was added. The average DT₅₀ was 27.9 h for Foray 76B with EAR, and 22.2 h without the dye. Persistence was the longest (14 d) when the AB‐48 dye was added to Foray 76B, and the DT₅₀ was 44.9 h.     

Dynamics of Bacterial Abundance,Biomass, Activity,and Community Composition in the Oligotrophic Traunsee and the Traun River (Austria)

The holomictic Traunsee is the deepest and second largest lakein Austria. The special characteristic of this ecosystem isthe fact that local salt and soda industries presumably alterthe lake by the discharge of waste materials. Since thebeginning of the 20th century salt and soda works areannually releasing up to 50,000 tons of solid wastes and up to150,000 tons of chloride into Traunsee. To assess potentialeffects of these anthropogenic impacts on the bacterioplanktonthree sampling sites, influenced as well as not influenced bythe industrial discharge, were chosen for comparison andsampled monthly from November 1997 to October 1998. Bacterialabundance ranged between 0.4 to 3.0 × 10⁶ cells ml^-1 with decreasing numbers along the depth profile. Theproportion of actively respiring bacteria, i.e. INT [2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyltetrazolium chloride]reducing cells, never exceeded 10% of DAPI (4',6'-diamidino-2-phenylindole) stained cells. Fluorescence in situ hybridization (FISH) was used to examine the seasonal and spatial distribution of dominant phylogenetic groups of thebacterioplankton. Up to 84% of bacteria detected with DAPIcould be detected via FISH applying the universal bacterialprobe EUB338. Percentages of alpha- and beta-Proteobacteriaand members of the Cytophaga-Flavobacterium cluster did notexceed 60% of DAPI-stained cells.Beta-Proteobacteriaappeared to be the most abundant group, not only in Traunsee butalso in two reference lakes, Attersee and Hallstättersee. No significant differences in any of the bacterial parameters couldbe detected between the three sampling sites and all measurementswere found in the range reported for oligotrophic lakes. The highdischarge of the Traun River, resulting in a lake water renewaltime of only one year, may diminish possible effects of industrial waste discharge in the pelagic zone.     

改性树脂NKZ对水溶性染料的吸附特性研究

根据聚合物絮凝剂与染料相互作用机理,用硝基胍对大孔型氯球改性得到了功能化吸附树脂NKZ.从热力学和动力学两方面研究了该树脂对5种水溶性染料的静态吸附特性.结果表明,树脂NKZ对水溶性染料的吸附具有很好的效果.     

Aureobasidium pullulans UVMU3-1产耐热性胞外漆酶活性物质培养基优化及其对染料脱色作用

对出芽短梗霉无色素突变株Aureobasidium pullulans UVMU3-1产耐热性胞外漆酶活性物质培养基进行优化,并研究其分子量大小、热稳定性及对三苯甲烷类染料孔雀石绿和结晶紫的脱色作用.结果表明:蔗糖、NaNO_3为UVMU3-1产耐热性胞外漆酶活性物质的最佳碳源和氮源,产酶优化培养基配方为:蔗糖66.5 g·L~(-1),NaNO_338.4 g·L~(-1),NaCl 1.08 g·L~(-1),酵母浸粉0.2 g·L~(-1),KH_2PO_41 g·L~(-1),pH=6.0.影响UVMU3-1产耐热性胞外漆酶活性物质的因素依次为:起始pH蔗糖NaClNaNO_3,培养7 d时产生最大酶活(94.81 U·L~(-1)),比对照提高3.85倍.其分子量小于1000 D,具有良好的热稳定性,煮沸30 min后高温酶活仍残留72.50%.粗酶液(7.5 U·L~(-1))与三苯甲烷类代表性染料孔雀石绿和结晶紫75℃反应5 min后,脱色率分别为76.3%、77.5%,反应35 min后脱色率分别达到96.3%、95.3%.