集成膜法水处理工艺的研究与应用

集成膜法除盐系统具有连续产水、出水质量好、易控制、占地少、不需酸碱、利于环保等优点。文章通过对集成膜法水处理技术进行研究与应用,将原有的化学除盐水处理方式改为集成膜法水处理工艺,该方法产水水质高且水质稳定,每年可节约酸碱200 t,阴、阳离子交换树脂10 t,切实解决电厂所面临的产水水质不稳定、酸碱废液排放等问题,有力推动了清洁生产。     

滇西北高原生态恢复过程中土壤侵蚀特征及其影响因子

滇西北高原由于地处生态脆弱的石灰岩区,水土流失严重,探讨该区生态恢复过程中土壤侵蚀的变化规律,为开展人工植被建设提供依据。以时空互代的方法,通过径流小区,对坡面的产沙产流特性及其影响因素进行研究。结果表明:天然次生林和人工混交林均有较好的调节径流和减少泥沙的作用,产沙量分别比坡耕地减少了51.46%、43.18%,产流量也相应降低了39.39%、24.24%。在最大次降雨条件下,荒草丛、坡耕地、次生林和混交林单次降雨的产沙量分别占试验期产沙总量的55.38%、55.58%、58.35%和58.05%,产流量相应占产流总量的64.72%、64.63%、73.85%和55.39%。而且,产流产沙量与土壤有机质质量分数均存在明显正相关,与乔、灌层植物多样性及均匀度指数等呈显著负相关性(P<0.05)。因此,乔灌草结合的群落结构配置模式是滇西北地区水土保持林营造的目标和方向。     

COMPARATIVE EVALUATION OF STATISTICAL METHODS FOR WATER SUPPLY FORECASTING1

ABSTRACT: While the correlation coefficient and standard error of estimate are frequently used when comparing models of seasonal water yield, the following criteria may be more important in selecting one model from among several alternatives: rationality of the regression coefficients, the distribution of the residual errors, and the correctness of indicators of the relative importance of the predictor variables. These criteria were used to compare seasonal water yield models that were calibrated using multiple regression, stepwise regression, principal components regression, polynomial regression using a principal components rotation, and constrained pattern search. Hydrologic data from the Upper Sevier River basin in southern Utah were used to illustrate the comparative analysis process. The prediction equations used the April-July streamflow volume as the criterion variable.     

环境空气中痕量挥发性有机硫监测分析方法研究

采用预浓缩系统与GC MS联用,建立了环境空气中痕量挥发性有机硫的分析方法,该法用苏玛罐或Tedlar袋采集空气样品在预浓缩系统中经液氮于-160℃冷冻浓缩后,进入GC MS进行分析。甲硫醇、乙硫醇、甲硫醚、乙硫醚、二甲二硫的最低检出限分别为2 0、1 0、1 0、1 0、0 5μg m3。经6次的重复测定,其相对标准偏差小于9 0%。该方法已用于环境空气的测定,取得了令人满意的结果。     

TA-FTIR/MS用于硝酸铵及其混合物的热化学行为研究

为评价物料混合对危险化学品热化学行为的影响,采用热分析-红外/质谱联用技术(TA-FTIR/MS)研究硝酸铵、柠檬酸和蔗糖的混合物的热化学行为。通过对硝酸铵及其混合物的分解温度和分解过程中逸出气体的分析,发现硝酸铵、柠檬酸和蔗糖的混合物热分解温度分别降低至135℃和153℃,而硝酸铵与甲基纤维素的混合物分解温度与硝酸铵基本相同为201℃,且各混合体系的气相分解产物均有氮氧化物(NOX),H2O和CO2。结果表明,混合物受热后其中的硝酸铵首先分解为硝酸和氨气;酸性物质和还原性物质由于对硝酸的分解反应有催化作用,使得混合物的热稳定性下降。     

Investigation on the interaction between triclosan and bovine serum albumin by spectroscopic methods

Abstract

Multi-spectroscopic and molecular docking methods were used to study the interaction between triclosan (TCS) and bovine serum albumin (BSA). The results indicated that the fluorescence quenching of BSA by TCS was due to the formation of TCS–BSA complex through static quenching. This result was also demonstrated by time-resolved fluorescence experiment. The binding constants and number of binding sites between TCS and BSA were 1.30?×?10⁵ M^?1 and 1.17 at 298?K, respectively. The thermodynamic parameters were studied in detail which suggested that hydrophobic forces and hydrogen bond played major roles in the TCS–BSA interaction. Moreover, the site marker competitive experiments and docking studies revealed that TCS could bind BSA into site I in subdomain IIA. All the results of UV–vis spectrophotometry, circular dichroism spectroscopy and synchronous fluorescence spectroscopy showed that interaction between TCS and BSA induced conformation changes of BSA.     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

持续提高黄土高原植被水土保持功能的配套技术(Ⅱ)造林与经营配套技术

阐明了能使防护林体系水土保持功能达到持续和稳定提高的造林和经营配套技术     

同步辐射技术在环境纳米金属组学研究中的应用

随着我国工业的发展,在工业产值不断提升的同时,向环境中释放出的各类污染物也逐渐增加,其中包括多种金属纳米颗粒物。这些金属纳米颗粒物进入大气、水源及土壤中,累积到一定程度引起环境安全问题;进一步可被动植物所吸收,经过食物链富集和传递,造成直接或间接人体暴露,危害人体健康。环境纳米金属组学,研究的范畴主要涉及自然或人为因素产生的金属纳米颗粒在环境介质和生物有机体中的生物/化学行为、转化归趋,并且据此评价金属纳米颗粒物的环境安全性及其生物健康效应。随着对金属纳米颗粒环境效应研究的不断深入,对传统的研究方法提出了更多的挑战。同步辐射具有高亮度、高准直和宽频谱等特性,在金属元素分析方面具有无可比拟的优势。本文主要介绍了同步辐射技术,如同步辐射X射线荧光分析技术(SR-XRF)和同步辐射X射线吸收光谱技术(SR-XAS)等,在金属纳米颗粒物的环境行为及其生物健康效应研究中的应用;结合本实验室及国内外的一些研究工作,阐述了同步辐射技术应用于环境纳米金属组学研究领域所取得的一些新进展,以期为拓展同步辐射技术在环境金属纳米颗粒物分析的应用研究提供参考价值。     

我国城市垂直绿化现状与垂直绿化新技术

虽然我国各城市开展城市垂直绿化推广工作，取得了不少成效，但是依然存在着垂直绿化技术和植物种类单一、效果有待改善等问题。近年来，国内外出现了不少新的垂直绿化技术，若能借鉴、选择性地进行应用，对我国城市垂直绿化工作必定起促进作用。介绍了几种较新的垂直绿化技术，以供参考。