中国危险废物和医疗废物焚烧处置行业二（口恶）排放水平研究

通过调研全国危险废物和医疗废物焚烧处置设施,对包含二噁英排放水平的设施按处置对象、炉型和处理量分类,并作系统分析和研究.结果表明现有危险废物焚烧设施烟气中二噁英的浓度比医疗废物低,达标率为74.19%;危险废物选用回转窑处置效果较好,达标率为66.67%;而医疗废物选用回转窑或热解炉,要综合考虑处置规模、生产成本和二英排放总量等因素;危险废物介于10~30 t·d-1和医疗废物介于10~20 t·d-1的处置设施要尤其注意二噁英的排放问题;医疗废物焚烧飞灰中二噁英的均值浓度为危险废物6倍以上,仅有16.67%满足填埋要求.二者烟气中二英的浓度分布以1,2,3,4,6,7,8-HpCDF、2,3,7,8-TCDF和OCDD为主.     

粉煤灰负载Fe2O3脱除气态单质汞的试验研究

在固定床反应器中研究了利用燃煤电厂固废粉煤灰(FA)负载Fe2O3所制备的Fe2O3/FA催化剂对气态Hg0的脱除情况,发现Fe2O3/FA具有较高的脱除Hg0的能力.同时,考察了Fe2O3负载量、温度、空速、Hg0浓度、烟气成分等对Fe2O3/FA脱除Hg0的影响.结果表明,Fe2O3/FA对Hg0的脱除能力随Fe2O3负载量(1%~10%)的增加和温度(120~200℃)的升高而增强;Fe2O3/FA在较低的空速和Hg0浓度条件下表现出了更高的脱除Hg0的活性;HCl和O2促进了Fe2O3/FA对Hg0的脱除,而SO2和H2O抑制了Fe2O3/FA对Hg0的脱除.逐级化学提取实验结果证实,Fe2O3将Hg0氧化为Hg2+的化合物并吸附在FA上,这是Fe2O3/FA具有较高的脱除Hg0能力的原因.     

改性粉煤灰处理黑化集团焦化含酚废水的研究

焦化废水是一种典型的含有难降解有机污染物的工业废水,除含有酚类化合物外,还含有多种芳香烃和杂环类有机污染物,成分复杂,水量大,对环境污染严重。因此,焦化废水处理技术越来越受到环保部门的重视。本文摸索了改性粉煤灰处理焦化含酚废水的试验工艺条件,确定了反应条件,反应时间和反应温度。     

Stabilization of heavy metals in MSWI fly ash using silica fume

The objective of this work was to investigate the feasibility and effectiveness of silica fume on stabilizing heavy metals in municipal solid waste incineration (MSWI) fly ash. In addition to compressive strength measurements, hydrated pastes were characterized by X-ray diffraction (XRD), thermal-analyses (DTA/TG), and MAS NMR (²⁷Al and ²⁹Si) techniques. It was found that silica fume additions could effectively reduce the leaching of toxic heavy metals. At the addition of 20% silica fume, leaching concentrations for Cu, Pb and Zn of the hydrated paste cured for 7 days decreased from 0.32 mg/L to 0.05 mg/L, 40.99 mg/L to 4.40 mg/L, and 6.96 mg/L to 0.21 mg/L compared with the MSWI fly ash. After curing for 135 days, Cd and Pb in the leachates were not detected, while Cu and Zn concentrations decreased to 0.02 mg/L and 0.03 mg/L. The speciation of Pb and Cd by the modified version of the European Community Bureau of Reference (BCR) extractions showed that these metals converted into more stable state in hydrated pastes of MSWI fly ash in the presence of silica fume. Although exchangeable and weak-acid soluble fractions of Cu and Zn increased with hydration time, silica fume addition of 10% can satisfy the requirement of detoxification for heavy metals investigated in terms of the identification standard of hazardous waste of China.     

A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures

Fly and bottom ashes are the main by-products arising from the combustion of solid biomass. Since the production of energy from this source is increasing, the processing and disposal of the resulting ashes has become an environmental and economic issue. Such ashes are of interest as a construction material because they are composed of very fine particles similar to fillers normally employed in bituminous and cementitious mixtures. This research investigates the potential use of ash from biomass as filler in bituminous mixtures. The morphological, physical and chemical characteristics of 21 different ashes and two traditional fillers (calcium carbonate and “recovered” plant filler) were evaluated and discussed. Leaching tests, performed in order to quantify the release of pollutants, revealed that five ashes do not comply with the Italian environmental re-use limits. Experimental results show a wide range of values for almost all the investigated properties and a low correlation with biomass type in terms of origin and chemical composition. Furthermore, sieving and milling processes were found to improve the properties of the raw material in terms of grading and sample porosity. The effectiveness of these treatments and the low content of organic matter and harmful fines suggest that most of the biomass ashes investigated may be regarded as potential replacements for natural filler in bituminous mixtures.     

Use of co-combustion bottom ash to design an acoustic absorbing material for highway noise barriers

The present study aims to determine and evaluate the applicability of a new product consisting of coal bottom ash mixed with Portland cement in the application of highway noise barriers. In order to effectively recycle the bottom ash, the influence of the grain particle size of bottom ash, the thickness of the panel and the combination of different layers with various particle sizes have been studied, as well as some environmental properties including leachability (EN-12457-4, NEN-7345) and radioactivity tests. Based on the obtained results, the acoustic properties of the final composite material were similar or even better than those found in porous concrete used for the same application. According to this study, the material produced presented no environmental risk.     

FACTORS INFLUENCING ACUTE TOXICfrY OF COAL ASH TO RAINBOW TROUT (SALMO GAIRDNERI) AND BLUEGILL SUNFISH (LEPOMIS MACROCHIRUS)1

ABSTRACT: The potentially toxic components in coal ash (ash particles, heavy metals) were evaluated in laboratory static, acute (96 hr) bioassays, both separately and in various combinations with extreme pH (5.0 and 8.5), using rainbow trout (Salmo gairdneri) and bluegifi sunfish (Lepomis macrochirus). Ash particle morphology and metal distribution anlaysis, using electron microscopy and surface-subsurface analysis by ion microscopy, showed that metals could be either clumped or evenly distributed on the surface of fly ash. Surface enrichment on fly ash particles from electrostatic precipitators, as measured by ion microscopy, was found for cadmium, copper, chromium, nickel, lead, mercury, titanium, arsenic, and selenium. Bottom (heavy) ash was not acutely toxic to either fish species at concentrations of up to 1500 mg/l total suspended solids (TSS) at pH 5.0, 7.5, or 8.5. Fly ash particles were not acutely toxic to blue-gill at levels up to 1360 mg/l TSS. Rainbow trout were highly sensitive to fly ash (25 to 60 percent mortality) at concentrations of 4.3 to 20.5 mg/I TSS when dissolved metal availability was high but were not sensitive at higher particulate concentrations (58 to 638 mg/I TSS) when dissolved metals were low. When metals were acid-leached from fly ash prior to testing, no rainbow trout mortality occurred at TSS concentrations of up to 2,350 mg/l TSS. When the percent of dissolved metal was high (e.g., 50–90 percent of the total), fish mortality was increased. Rainbow trout were nearly two orders of magnitude more sensitive than bluegill when subjected to a blend of cadmium, chromium, copper, nickel, lead, and zinc. The two species were similar in their acute sensitivity to acidic pH at levels at or below 4.0 and alkaline pH of 9.1. If the pH of coal ash effluent is contained within the range 6.0 to 9.0, acute toxicity to fish can be attributed to trace element availability from fly ash but not heavy ash. Control of holding pond and effluent pH and maximizing pond residence time are important strategies for minimizing effects of ash pond discharges on fish.     

Experimental study on the effect of fly ash content in cemented paste backfill on its anti-sulfate erosion

ABSTRACT

In order to study the effect of fly ash content in cemented paste backfill (CPB) on its anti-sulfate erosion, the apparent phenomenon, strength development, and hydration products change the law of CPB with different fly ash content under long-term soaking of 5% sodium sulfate solution were studied by the macrotest and microanalysis, in addition, the mechanism of CPB anti-sulfate attack was analyzed by combining with a scanning electron microscope (SEM). The results indicated that the effect of sulfate environment on the strength of fly ash cemented paste backfill (FCPB) was mainly determined by the hydration products in the FCPB at different soaking times. In the early soaking stage, the formation of ettringite (AFt) in FCPB could improve its compactness, which was conducive to improving the strength of FCPB. In the late soaking stage, there were ettringite-type erosion damage and gypsum erosion-type damage internal of the FCPB with low content fly ash, resulting in microfracture, cracking of the FCPB, and reducing the strength. CPB with an appropriate content of fly ash could improve the internal structure of the FCPB to achieve the purpose of anti-sulfate erosion.     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.     

磨细粉煤灰自动装车除尘系统的研制

针对磨细粉煤灰由储料仓向罐式汽车内装料的作业特点,研制了自动化装车除尘系统,解决了装车过程中的粉尘污染问题,并实现了装车过程的自动化。