三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

环境管理中“限期治理制度”的有关问题

基于我国法制建设的要求以及市场经济建设过程中所面临的问题，从法律角度出发探讨了我国环境管理制度中的“限期治理制度”，包括其性质及与其他环境管理制度的关系等。从立法上对此制度的完善作了探讨。     

SBR法处理麻生物脱胶废水的T艺实验研究St

采用SBR法处理麻生物脱胶废水，实验考察了溶解氧、曝气时间、污泥负荷与处理效果的关系。结果表明，在限制性曝气及COD     

关于公路环境监理专业化问题

根据公路项目的环境管理的现状和公路施工对环境的影响，结合公路环境监理试点工作的实践，提出建立专业化的环境监理队伍，专业化的组织形式，规范化的工作方法等。     

三唑磷农药废水厌氧处理可行性研究

采用厌氧流化率工艺处理在唑磷农药废水，必须降低原水中ＮＨ３－Ｎ含量，调整营养比例，当ＣＯＤ：Ｎ：Ｐ＝（１８０～２００）：５：１时，在中温厌氧消化条件下，ＣＯＤ含量可从４１７０ｍｇ／ｌ，去除率约５０％，沼气产率达到０．２５６ｍ＾３／ｍ＾３．ｄ。因此，把厌氧处理作为好氧处理的预处理单元，能确保整个处理系统出水达标。     

一种新型复合式生物流化反应器混合特性的研究

对新型蜂窝状断面复合生物流化反应器进行了液体循环速率和水力停留时间分布曲线的测定，实验表明新型反应器具有抗冲击负荷强，接近CSTR反应器的特点，反应器随气量增大、载体投加量减少和进水量减少而更近似于CSTR反应器，通过理论分析，证明了影响液体循环速率的参数主要有气体流量(气含率)、反应器沿程和局部阻力系数以及Ad/Ar，并且得出液体循环速率与反应器高度的0．5次方成正比。     

室内空气中甲醛和苯系物检测与净化

通过对哈尔滨市装饰装修竣工一年内的60户室内空气污染物检测分析,结果表明:室内空气甲醛超标64.1%,苯超标54.1%,甲苯超标35.6%,二甲苯超标30.6%.采用臭氧法,光催化氧化法和药剂法三种方法对室内空气污染物甲醛和苯进行净化效果实验研究,评价其净化效果,比较了三种方法的优劣.     

Treatment of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran production effluent by combination of biological treatments and Fenton＇s oxidation

High strength refractory organic stream is produced during the production of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran （One Dye Black 2, abbr. ODB 2）, a novel heat-sensitive material with a promising market. In this study, a combination of acidificationprecipitation, primary biological treatment, Fenton＇s oxidation and another biological treatment was successfully used for the removal of COD from 18000-25000 mg/L to below 200 mg/L from the ODB 2 production wastewater in a pilot experiment. A COD removal of 70%-80% was achieved by acidification-precipitation under a pH of 2.5-3.0. The first step biodegradafion permitted an average COD removal of 70% under an hydraulic residence time （HRT） of 30 h. By batch tests, the optimum conditions of Fenton＇s oxidation were acquired as： Fe^2＋ dose 6.0 mmol/L; H2O2 dose 3000 mg/L; and reaction time 6 h. The second step biological treatment could ensure an effluent COD below 200 mg/L under an HRT of 10 h following the Fenton＇s treatment.     

Determination and discussion hydraulic retention time in membrane bioreactor system

Based on the microorganism kinetic model, the formula for computing hydraulic retention time in a membrane bioreactor system (MBR) is derived. With considering HRT as an evaluation index a combinational approach was used to discuss factors which have an effect on MBR. As a result, the influencing factors were listed in order from strength to weakness as: maximum specific removal rate K, saturation constant Ks, maintenance coefficient m, maximum specific growth rate ,ua and observed yield coefficient Yobs. Moreover, the formula was simplified, whose parameters were experimentally determined in petrochemical wastewater treatment. The simplified formula is θ= 1.1( 1/β -1)(Kｓ S)/KXo , for oetroehemical wastewater treatment K and Ko eaualed 0.185 and 154.2, resoectively.     

A THEORETICAL TRAVEL TIME BASED ON WATERSHED HYPSOMETRY1

ABSTRACT: The time to hydrograph peak of a watershed basin has been found to correlate with various statistical attributes (e.g., skewness and kurtosis) of its hypsometric curve (treated as probability distribution). This paper presents a theoretical travel time that is conceptually analogous to the time to hydrograph peak and can be calculated directly from the hypsometric curve of a watershed basin based on gravity and acceleration. The theoretical travel times for 23 selected watersheds in the United States are found to correlate significantly with their corresponding hypsometric attributes. In addition, the theoretical travel times are consistent with the times of concentration estimated from the Federal Aviation Administration method. Thus, this paper offers a simple theoretical explanation to the empirically identified linkage between time to hydrograph peak and hypsometric attributes. This theoretical travel time can provide an alternative way of characterizing the effects of basin morphometry on hydrologic response.