Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

Ionic composition of submicron particles (PM1.0) during the long-lasting haze period in January 2013 in Wuhan, central China

In January 2013, a long-lasting severe haze episode occurred in Northern and Central China; at its maximum, it covered a land area of approximately 1.4 million km². In Wuhan, the largest city in Central China, this event was the most severe haze episode in the 21st century. Aerosol samples of submicron particles (PM_1.0) were collected during the long-lasting haze episode at an urban site and a suburban site in Wuhan to investigate the ion characteristics of PM_1.0 in this area. The mass concentrations of PM_1.0 and its water-soluble inorganic ions (WSIIs) were almost at the same levels at two sites, which indicates that PM_1.0 pollution occurs on a regional scale in Wuhan. WSIIs (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, Cl^-, NO₃^- and SO₄^2-) were the dominant chemical species and constituted up to 48.4% and 47.4% of PM_1.0 at WD and TH, respectively. The concentrations of PM_1.0 and WSIIs on haze days were approximately two times higher than on normal days. The ion balance calculations indicate that the particles were more acidic on haze days than on normal days. The results of the back trajectory analysis imply that the high concentrations of PM_1.0 and its water-soluble inorganic ions may be caused by stagnant weather conditions in Wuhan.     

重金属抗性解磷细菌的磷溶解特性研究

从湖南省湘西州花垣县的铅锌矿表层土壤中,筛选出两株具有重金属抗性和解磷特性的细菌T PSB1和T PSB2.通过16S rRNA基因序列比对,分别鉴定为嗜麦芽寡养单胞菌(Stenotrophomonas maltophilia)和唐菖蒲伯克霍尔德菌(Burkholderia gladioli).T PSB1和T PSB2在含有难溶性无机磷液体培养基中,其上清液的可溶性磷含量最高分别达到了402.9 mg·L-1和589.9 mg·L-1;在难溶性有机磷固体和液体培养基中,固体平板上均出现解磷圈,而液体培养基上清液中,可溶性磷含量也分别达到了2.97 mg·L-1和4.69 mg·L-1.另外,两株细菌对重金属Zn2+的抗性最高,在其浓度为2000 mg·L-1固体和液体培养基条件下均可以生长,磷溶解浓度分别为114.8 mg·L-1和125.1 mg·L-1.而在含铬和铅的浓度为1 000 mg·L-1的液体培养基中,两株细菌同样表现出重金属抗性.在Pb2+浓度为1000 mg·L-1的液体培养基中,磷溶解浓度分别达到了57.9 mg·L-1和71.7 mg·L-1;而在Cr2+浓度为1000 mg·L-1的培养基中磷溶解浓度分别为60.1 mg·L-1和98.4 mg·L-1.     

巢湖水体组分垂向分布特征及其对水下光场的影响

富营养化湖泊不同组分垂向分布及其对水下光场的影响是湖泊水环境遥感领域亟待开展的内容.利用巢湖野外实测数据,分析水体不同组分垂向分布特征,结合Hydrolight辐射传输模型模拟研究水体不同组分垂向分布对漫衰减系数Kd的影响.结果表明,巢湖水体悬浮物以及有色可溶性有机物CDOM垂向分布较为均一,水面未发生藻华现象时叶绿素a垂向分布符合高斯正态分布,漫衰减系数Kd受叶绿素a以及无机悬浮物的显著影响,其垂向变化复杂多样,以往以水体光学性质均一为前提计算得到的Kd仅仅表示其衰减的平均情况,不能精确反映水下光场的垂向变化,因此研究水体组分垂向分布特征及其对漫衰减系数Kd的影响是开展藻类垂向分布异质性对水下光场影响机制研究的前提和基础.     

填埋垃圾浸提液与地下水污染物组成差异及成因

为揭示垃圾渗滤液污染地下水特征,采用常规分析、三维荧光光谱和多元统计分析,研究了某简易填埋场垃圾浸提液与地下水中无机盐、有机物及重金属的分布特征及成因.结果表明,填埋场垃圾异质性强,浸提液中NH+4-N浓度高,而Cl-、SO2-4、溶解性有机物(DOM)、重金属含量低,强还原氛围导致硝化过程受阻,NO-3-N、NO-2-N含量低,浸提液中Cu主要结合在DOM上,而Ba、Cd、Cr、Fe、Mn、Ni、Zn及As主要结合在疏水性有机物上.除填埋场所在点地下水外,其余点地下水污染物来源相似,其中的DOM以微生物来源为主;与垃圾浸提液中污染物分布特征相反,地下水中NH+4-N含量低而Cl-、SO2-4、DOM、NO-3-N、NO-2-N含量高,Cu、Ba、Cd、Fe、Mn及Ni的分布与DOM有关,主要结合在荧光有机物上.研究结果显示,基于地下水中污染物组成差异,采用聚类分析方法可识别出地下水受渗滤液污染点.     

桂江主要离子及溶解无机碳的生物地球化学过程

河流水体的化学组成记录了流域内各种自然过程与人类活动的信息.对西江一级支流桂江化学径流的分析结果表明,桂江水体的离子组成主要受碳酸盐岩化学风化过程的控制,CO2是这一过程的主要侵蚀介质;H2SO4对碳酸盐岩的风化影响桂江河水的化学组成.大气沉降、人类活动、碳酸盐岩和硅酸盐岩化学风化对桂江水体贡献的溶解物质分别占总溶解物质的2.7%、6.3%、72.8%和18.2%.河流溶解无机碳(DIC)的稳定同位素组成(δ13CDIC)揭示桂江河水中的DIC明显被浮游植物的光合作用所利用.浮游植物初级生产力对桂江颗粒有机碳(POC)的贡献达22.3%~30.9%,这表明岩石风化来源的DIC经浮游植物的光合作用转化为有机碳,并在迁移过程中部分沉积水体底部,进而形成埋藏有机碳.     

不同添加剂对铅冶炼污染石灰性土壤的修复及土壤性质的影响研究

探讨了污水处理厂脱水污泥、枯草和磷矿粉对受铅冶炼污染的石灰性土壤(全Pb、Cd、Zn含量分别为2337、21.4、486 mg·kg-1,DTPA提取态Pb、Cd、Zn含量分别为1035、14.5、68.7 mg·kg-1)中重金属的稳定效果及对土壤性质的影响.其中,污泥和枯草均按200 g·kg-1(干重)的用量施用,磷矿粉按n(P)∶n(Pb)=2∶1比例施用,培养80 d.研究结果表明,单独施用污泥可使土壤DTPA-Pb含量降低18.0%(p0.05),并可显著降低土壤pH,增加土壤氮、磷有效性和电导率、DTPA-Cd、DTPA-Zn含量,其中,DTPA-Cd、DTPA-Zn含量增加比例均达到10%以上.单独施用枯草可使土壤DTPA-Pb含量降低10.7%(p0.05),土壤有机质含量增加26.4%(p0.05),对土壤其它性状影响较小.磷矿粉单独施用时对土壤性质影响较小.与污泥单独施用相比,磷矿粉与污泥配合施用时,可使土壤DTPA-Cd含量降低11.9%.     

胞外聚合物磷酸盐形态对生物除磷过程的影响研究

以不同DO条件下污泥龄(SRT)分别为10 d和30 d的两组实验室A/O-SBR反应器活性污泥为研究对象,探讨了胞外聚合物(EPS)磷酸盐形态对生物除磷过程的影响.结果表明,污泥絮体中的磷主要分布于EPS中,PO3-4-P和聚磷酸盐(Poly-P,包括低分子量聚磷酸盐LMW PolyP和高分子量聚磷酸盐HMW Poly-P)是EPS磷的主要形态;EPS对生物除磷的影响明显大于细菌细胞,EPS磷的厌氧降低量和好氧升高量为胞内磷变化量的2.8~6.4倍.EPS中的LMW Poly-P和HMW Poly-P含量均表现厌氧降低和好氧升高的变化规律;对于相同SRT的污泥,中DO(2.5~3.5 mg·L-1)条件较低DO(0.7~1.0 mg·L-1)条件下EPS的LMW Poly-P和HMW Poly-P有更大的厌氧降低量和好氧升高量,对应着更明显的生物除磷过程,说明EPS不仅是生物除磷过程的中转站,而且参与了生物聚磷过程.     

东莞市大气亚微米粒子PM1及其中水溶性无机离子的污染特征

2011年8月—2012年7月期间,利用中流量(100 L·min-1)大气采样器对东莞市A和B两点(A:生活区,B:工业区)进行PM1、PM1~2.5、PM2.5~10采样,并定量分析颗粒物上F-、Cl-、NO-3、SO2-4、NH+4、Na+、K+、Ca2+、Mg2+等9种水溶性无机离子.分析结果显示,工业区B点的细粒子污染较生活区A点严重,B点PM1质量浓度年均值为48μg·m-3,其浓度是A点的1.2倍.A、B两点PM1对PM2.5和PM10的质量贡献率无明显差异,平均贡献率分别高达69%和45%.二次离子SO2-4、NO-3、NH+4及与燃烧行为有关的K+、Cl-等5种离子在细粒子PM1上富集,这5种离子对PM1质量的贡献率分别为18.82%~19.76%、4.98%~5.47%、3.98%~4.12%、2.03%~2.27%和3.39%~3.78%.而其他4种离子,Ca2+、Mg2+、F-和Na+积聚在粗粒子PM2.5~10上.PM10/PM2.5/PM1三种粒子中,PM1粒子酸性值AE/CE(阴离子当量浓度/阳离子当量浓度)比值和硫转化率SOR、氮转化率NOR值均是最高.