TiO2表面沉积Ag粒子及其可见光下降解含盐废水中的苯酚

为了制备可见光激发下能高效降解含盐废水中有机物的光催化剂,首次以商用TiO_2光催化剂(P25)为载体,利用吸附相反应技术一步获得了Ag沉积的可见光响应复合光催化剂.同时,通过XPS、TEM、HRTEM及紫外可见漫反射光谱图,结合多种高含盐水体系中苯酚的光催化降解过程,研究了不同Ag沉积对催化剂可见光活性的影响.结果发现,吸附平衡后P25表面富含水的吸附层可作为反应和粒子的生成场所,生成量子尺寸的Ag粒子.另外,在吸附层中生成的Ag粒子均匀分布于P25表面并与之紧密结合,并在TiO_2晶格结构中引入晶格交错结构.Ag与TiO_2的表面等离子体共振效应和晶格交错结构共同提升了催化剂的可见光响应和电荷的分离效率,增强了催化剂对苯酚的可见光催化性能.在含盐废水体系中,盐离子数量越多,催化剂在可见光下降解苯酚过程受到的干扰越大.     

空间环境下碳纤维/双马树脂基复合材料的性能演化及损伤机理

目的基于碳纤维/双马树脂基(CF/BMI)复合材料在航天结构材料中广泛的应用前景,研究其性能演化及损伤机理,为评估与预测其在空间环境下的服役性能及寿命提供理论依据。方法利用地面试验装置模拟不同的空间环境因素包括真空热循环、质子辐照和电子辐照,利用动态力学分析(DMA)、热重分析(TGA)、X射线光电子能谱(XPS)、热膨胀分析、原子力显微镜(AFM)和力学性能测试等手段系统地研究CF/BMI复合材料在空间环境下的性能变化及损伤行为。结果真空热循环能够引发复合材料产生脱气行为与界面脱粘效应,使其横向拉伸强度退化,弯曲强度和层间剪切强度受到热循环初期固化交联作用的影响,呈现先升高后降低的变化趋势。质子辐照导致材料表面层化学键断裂及碳化,使力学性能及热性能受到一定程度的损伤。电子辐照能够引发辐照交联和辐照降解作用,在较高束流量辐照下降解作用占据主导地位成为复合材料力、热性能退化的决定性因素。结论预期研究成果为CF/BMI复合材料在空间环境下的服役性能及寿命的评估与预测提供了必要的理论依据。     

微波辅助白腐真菌煤炭脱硫试验研究

将微波技术与生物技术相结合用于煤炭脱硫，采用微波功率1 000 W、辐照时间80 s对煤样进行辐照处理后，考察了初始pH值、煤粉粒径和煤浆浓度对微波辅助白腐真菌脱硫效果的影响，以及脱硫过程中硫化物的转化规律。研究结果表明，微波辐照作用能够缩短脱硫周期，提高有机硫的脱除率。在初始pH值为4.5，煤粉粒径为80～120目，煤浆浓度为10%，浸出时间为3 d的条件下，煤中的全硫、无机硫和有机硫脱除率分别达到52.06%、51.61%和54.22%。     

Photocatalytic removal of organic pollutants in aqueous solution by Bi(4)Nb(x)Ta((1-x))O(8)I

In this work, Bi₄Nb_xTa_(1−x)O₈I photocatalysts have been synthesized by solid state reaction method and characterized by powder X-ray diffraction, scanning electron microscope and UV-Vis near infrared diffuse reflectance spectroscopy. The photocatalytic activity of these photocatalysts was evaluated by the degradation of methyl orange (MO) in aqueous solutions under visible light, UV light and solar irradiation. The effects of catalyst dosage, initial pH and MO concentration on the removal efficiency were studied, and the photocatalytic reaction kinetics of MO degradation as well. The results indicated that Bi₄Nb_xTa_(1−x)O₈I exhibited high photocatalytic activity for the removal of MO in aqueous solutions. For example, the removal efficiency of MO by Bi₄Nb_0.1Ta_0.9O₈I was as high as 92% within 12 h visible light irradiation under the optimal conditions: initial MO concentration of 5-10 mg L⁻¹, catalyst dosage of 6 g L⁻¹ and natural pH (6-8), the MO molecules could be completely degradated by Bi₄Nb_0.1Ta_0.9O₈I within 40 min under UV light irradiation, and the photodegradation efficiency reaches to 60% after 7 h solar irradiation. Furthermore, the photocatalytic degradation of Bisphenol A (BPA) was also investigated under visible light irradiation. It is found that 99% BPA could be mineralized by Bi₄Nb_0.1Ta_0.9O₈I after 16 h visible light irradiation. Through HPLC/MS, BOD, TOC, UV-Vis measurements, we determined possible degradation products of MO and BPA. The results indicated that MO was degradated into products which are easier to be biodegradable and innocuous treated, and BPA could be mineralized completely. Furthermore, the possibility for the photosensitization effect in the degradation process of MO under visible light irradiation has been excluded.     

微波辐照技术修复氯丹污染土壤

采用微波辐照技术修复氯丹污染土壤。以α-氯丹和γ-氯丹的去除率为评价指标，采用正交实验设计确定土壤中氯丹去除的最佳微波辐照条件。实验结果表明，当微波辐照强度为5.83W/g、微波辐照时间为20min、土壤含水率为15%时，土壤中氯丹的去除效果最好，去除率达到85%以上。微波辐照技术简单高效，易于控制，且无二次污染，具有可行性，可作为修复氯丹污染土壤的新方法。     

Influence of pH on the sonolysis of ciprofloxacin: Biodegradability, ecotoxicity and antibiotic activity of its degradation products

The presence of antibiotics in the aquatic environment has raised concerns due to the potential risk for the emergence or persistence of antibiotic resistance. Antibiotics are often poorly degraded in conventional wastewater treatment plants. In this study, sonolysis at 520 kHz and 92 W L⁻¹ was used for the degradation of the fluoroquinolone antibiotic ciprofloxacin. In a first experiment at pH 7, 57% of the ciprofloxacin (15 mg L⁻¹) was degraded after 120 min of ultrasonic irradiation at 25 °C. pH proved to be an important parameter determining the degradation rate, since the pseudo first order degradation constant increased almost fourfold when comparing treatment at pH 7 (0.0058 min⁻¹) and pH 10 (0.0069 min⁻¹) with that at pH 3 (0.021 min⁻¹). This effect can be attributed to the degree of protonation of the ciprofloxacin molecule. The BOD/COD ratio of the solutions, which is a measure for their biodegradability, increased from 0.06 to 0.60, 0.17, and 0.18 after 120 min of irradiation depending on the pH (3, 7, and 10, respectively). The solution treated at pH 3 can even be considered readily biodegradable (BOD/COD > 0.4). The antibiotic activity against Escherichia coli (G−) and Bacillus coagulans (G+) of the treated solutions also reduced after sonolysis. The highest decrease was again found when irradiated at pH 3. In contrast, ecotoxicity of the solutions to the alga Pseudokirchneriella subcapitata increased 3- to 10-fold after 20 min of treatment, suggesting the formation of toxic degradation products. The toxicity slowly diminished during further treatment.     

Cytotoxicity of gamma irradiated aflatoxin B1 and ochratoxin A

Toxicity of gamma irradiated mycotoxins aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) was investigated in vitro. AFB₁ and OTA stock solutions (50?mM, in methanol) were gamma irradiated (5 and 10 kGy) and non-irradiated and irradiated mycotoxins solutions were tested for cytotoxicity on Pk15, HepG2 and SH-SY5Y cell lines (MTT assay, 1–500?μM concentration range; 24?h exposure). Degradation of mycotoxin molecules was examined by liquid chromatography tandem mass spectrometry (HPLC-MS/MS). AFB₁ and OTA radiolytic products were less toxic than the parent mycotoxins to all of the tested cell lines. Gamma irradiation even at 5 kGy had effect on AFB₁ and OTA molecules however, this effect was dependent on chemical structure of mycotoxin. Since gamma irradiation at low dose reduced initial level of both mycotoxins, and gamma irradiated mycotoxins had lower toxicity in comparison to non-irradiated mycotoxins, it can be concluded that gamma irradiation could be used as decontamination method.     

Transesterification of hazelnut oil by ultrasonic irradiation

Ultrasonic irradiation is considered an effective way to increase mass transfer between immiscible liquid–liquid phases in a heterogeneous system leading to faster transesterification and higher yield and saving excess methanol and catalyst. In this study, the transesteri?cation of hazelnut oil with methanol and ethanol was performed in the presence of potassium hydroxide or sodium methoxide as a catalyst using two types of ultrasonic irradiation with a probe (20 kHz, 200 W) and a bath (35 kHz, 400 W); a conventional production method was also used. The reaction time, alcohol:oil molar ratio, catalyst type (KOH or NaOCH₃), and catalyst amount (wt.% of oil) were studied as experimental parameters. The highest methyl ester conversion was obtained as 98.12% by using ultrasonic probe at a 5:1 methanol:oil molar ratio with KOH 1 wt.% of oil as catalyst in 20-min reaction time at autogenous temperature. The application of ultrasonic irradiation by using a probe decreased the level of energy consumption, showing that this method may be a promising alternative compared with the conventional production method.     

某铀矿山废石场及尾砂库氡污染调查

通过对某退役铀矿山的 14个废石堆放场及 3个尾砂库氡析出率的测量及内照射剂量的估算 ,表明 ,只有一个废石场的氡析出率超过国家规定的管理限值水平 ;尾砂库的氡析出率较高 ,个别测点的氡析出率超出管理限值水平近 7倍 ;因氡析出而使当地居民额外所受的年最大有效剂量当量为 0 0 5 8mSv。指出在尾砂库表面覆盖黄土 ,可以有效降低氡析出水平 ,当覆盖厚度达 0 5m时 ,可将氡析出水平降低 84%以上。