肥煤自燃全过程热动力学特征参数研究

实验测定了林西矿肥煤样品30~900℃煤自燃全过程热动力学特征参数,得出:TG/DTG曲线显示煤样DTG初始临界温度45℃,干裂温度122℃,活性温度195℃,增速温度265℃,质量极大值温度342℃,着火温度465℃,最大热失重速率温度515℃和燃尽温度690℃;DSC曲线显示,煤样初始放热温度60℃、最大热释放速率温度511℃。结合TG-DTG-DSC曲线综合分析可知,煤温达到510℃左右时煤样反应最剧烈。由煤自燃标志气体测定实验系统得出:煤温130℃后CO,CO 2释放量迅速增加,210℃增加速度下降;CH 4,C 2 H 6含量变化具有规律性且两者变化相近;C 2 H 4出现温度为130℃;C 2 H 4/C 2 H 6比值在190~350℃有较强的规律性,呈上升趋势且上升速度较快;350℃之后,CH 4,C 2 H 6,C 2 H 4体积分数均开始急剧增大;C 2 H 4/CO与C 2 H 4/CO 2变化趋势大致相同,在130~350℃时缓慢增长,达到350℃后比值呈指数形式上升。经拟合曲线,得到活化能的3个突变点温度:70,180,220℃,其中180℃与交叉点温度相吻合。通过以上研究,得到了肥煤自燃全过程的热力学特征参数,为实际生产中防治煤自燃提供了理论依据。     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果，需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试，探究人体在不同环境温度下体表温度的变化，得出胸部、背部及额头为热量最高部位，并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型，对不同环境中的屏蔽服冷却效果展开研究，分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇，均可帮助人体降低体温，提高舒适度。     

Development of machine learning based prediction models for hazardous properties of chemical mixtures

Lower flammability limit (LFL), upper flammability limit (UFL), auto-ignition temperature (AIT) and flash point (FP) are crucial hazardous properties for fire and explosion hazards assessment and consequence analysis. In this study, a comprehensive prediction model set was constructed by using expanded chemical mixture databases of chemical mixture hazardous properties. Machine learning based gradient boosting quantitative structure-property relationship (GB-QSPR) method is implemented for the first time to improve the model performance and prediction accuracy. The result shows that all developed models have significantly higher accuracy than other regular QSPR models, with the 5-fold cross-validation RMSE of LFL, UFL, AIT, and FP models being 1.06, 1.14, 1.08, and 1.17, respectively. All developed QSPR models can be used to estimate reliable chemical mixture hazardous properties and provide useful guidance in chemical mixture hazard assessment and consequence analysis.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

某型机车牵引电机传动端轴承低速轻载无飞溅润滑试验研究

主要根据客户要求,在低速(1 km/h)及轻载工况下,测量传动端轴承无飞溅润滑条件下的温升等参数,而进行相关的电机试验,为某型机车牵引电机传动端轴承在低速及轻载工况下,无飞溅润滑提供试验验证及技术支撑。     

全球低碳发展评估及中国低碳发展的实现路径

低碳发展日益成为国际关注的热点问题,中国正处在快速工业化和城镇化进程当中,通过低碳发展实现经济社会转型尤为迫切。在全球大背景下正确判断中国的低碳发展水平,汲取各国有益的低碳发展经验,寻求适合中国的低碳发展路径尤为重要。从低碳发展特征指标变动出发,通过统计分析,得出全球低碳发展历史和现状水平,以及中国所处的位置。研究表明,近20年来全球碳生产力水平不断提高,近年来中国的碳生产力水平飞速提升,但是中国的碳生产力仍然远远低于全球平均水平,离先进国家的差距更大,不足法国的1/10,人均二氧化碳排放增速位居世界前列,减排压力巨大。因此,结合国内外实践经验,总结了中国低碳发展的5个实现路径,分别是调整能源结构、发展低碳产业、倡导低碳消费、建设低碳城市和加强碳汇建设。     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。     

烟气脱硫溶液中硫酸根的去除

分别采用石灰乳化学沉淀法和低温结晶法去除烟气脱硫溶液中的SO42-。实验结果表明：在室温、CaO溶液质量分数25%的条件下，石灰乳化学沉淀法对SO42-的去除率仅为59.51%，且向溶液中引入了Ca2+，产生的硫酸钙固体废物难以再生利用；采用低温结晶法处理烟气脱硫溶液，在结晶温度7 ℃、结晶时间3 h、NaOH加入量34.8 g/L的条件下，SO42-的去除率为82.04%、滤液中的ρ（Na+）为3.88 g/L。在现场工业应用试验中，采用低温结晶法去除烟气脱硫溶液中的SO42-，平均SO42-的去除率可达70.00%以上，滤液中的ρ（Na+）小于15.00 g/L。该法可有效抑制烟气脱硫溶液中SO42-含量的增加。     

厌氧膨胀床处理低浓度污水的污泥颗粒和生物活性变化

污泥的聚集形态和活性，是影响厌氧反应器处理效率的关键因素。通过对厌氧膨胀床反应器（anaerobicex—pandedblanketreactor，AEBR）处理低浓度城镇污水在启动和稳定运行期的污泥活性研究，AEBR在启动运行期内，接种颗粒污泥为适应低浓度基质条件，污泥粒径经历从大变小，再重新颗粒化粒径变大的过程。在运行期第103天，粒径小于1000μm污泥的体积比达到44．7％，平均粒径为952μm，到运行期第173天，粒径小于1000μm污泥的体积比降为28％，平均粒径达1179μm，污泥重新颗粒化完成。颗粒污泥适应新的环境后，单位重量污泥的最大比产甲烷活性（specificmetha．nogensisactivity，SMA）值和胞外聚合物含量增加，分别达到112mLCH4／（gVSS·d）和215mg／gVSS。在处理实际城镇污水的AEBR反应器内，辅酶F420含量可以有效指示污泥样品的产甲烷活性，AEBR反应器不同高度位置的污泥活性不一样，反应器底部污泥活性低于中上部区域污泥的活性。