污染物总量控制保障措施的研究

介绍了６０１所实施总量控制目标的保障措施及实践经验     

Fast Ferry Traffic as a Qualitatively New Forcing Factor of Environmental Processes in Non-Tidal Sea Areas: A Case Study in Tallinn Bay,Baltic Sea

The impact of wake wash from high-speed ferries on the coastal environment in non-tidal seas is analysed in terms of wave energy and power, and properties of the largest waves. Shown is that hydrodynamic loads caused by heavy high-speed traffic may play a decisive role not only in low-energy coasts but also in certain areas with high wind wave activity. For example, ship-generated waves form, at least, about 5–8% from the total wave energy and about 18–35% from the wave power in the coastal areas of Tallinn Bay exposed to dominating winds. The periods of wake waves from high-speed ships frequently are much larger than dominating periods of wind waves. The leading waves typically have a height of about 1 m and a period of 10–15 s. Such waves extremely seldom occur in natural conditions in many regions of semi-enclosed seas. They cause unusually high hydrodynamic loads in the deeper part of the nearshore. The fast ferry traffic thus is a qualitatively new forcing component of vital impact on the local ecosystem. It is demonstrated that wakes from high-speed ferries may trigger considerable changes of the existing balance of coastal processes. Owing to their low decay rates combined with their exceptional compactness after crossing many kilometres of the sea surface, such wakes may cause considerable remote impact of the ship traffic. This feature has to be addressed in the analysis of the impact of harbours and associated ship traffic in the neighbourhood of vulnerable areas.     

Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.     

An on-line instrument for mobile measurements of the spatial variability of hexavalent and trivalent chromium in urban air

The Steam-Jet Aerosol Collector-long Pathlength Absorbance Spectroscopy (SJAC-LPAS), an on-line continuous instrument for mobile measurements of spatial distribution of water-soluble hexavalent and trivalent chromium in ambient aerosols, has been developed and is presented here. The system collects particles with the SJAC and analyzes the collected sample on-line using the diphenycarbazide (DPC) colorimetric method. By using a Teflon AF (Amorphous Fluoropolymer) liquid core wave guide, the limit of detection has been significantly improved, allowing on-line measurements at ambient concentrations. The limit of detection for Cr(VI) is 0.2 ng m⁻³. Water-soluble Cr(III) can also be measured by oxidizing it to Cr(VI) in a parallel line using hydrogen peroxide before the detection with the DPC method. The concentration of Cr(III) is then determined as the difference between the two lines (Cr(VI) and Cr(VI) plus Cr(III)). The instrument was specifically designed to be used on a mobile platform to study spatial distribution of the pollutant within a city on a scale of 100 m. Special attention was given to the time resolution and the stability of the instrument performance under driving conditions. The time resolution of the instrument is 15 s. At a typical driving speed of 30 km h⁻¹ the instrument can detect variations in chromium concentration (“hot spots”) on the scale of about 150 m. The instrument has proven to operate reliably and capture temporal and spatial variability of Cr(VI) concentration during four mobile measurement campaigns in Wilmington, DE.     

房地产开发项目的环境污染和防治措施

随着我国房地产事业的蓬勃发展 ,建设开发过程中的环境问题日益突出 ,如果防治措施不当 ,会对环境造成一定危害。根据房地产开发项目的污染特点 ,分别采取不同的防治措施后 ,可以实现项目开发和环境保护的双赢。     

Evaluation of the International Vehicle Emission （IVE） model with on-road remote sensing measurements

Intemational Vehicle Emissions （IVE） model funded by U.S. Environmental Protection Agency （USEPA） is designed to estimate emissions from motor vehicles in developing countries. In this study, the IVE model was evaluated by utilizing a dataset available from the remote sensing measurements on a large number of vehicles at five different sites in Hangzhou, China, in 2004 and 2005. Average fuel-based emission factors derived from the remote sensing measurements were compared with corresponding emission factors derived from IVE calculations for urban, hot stabilized condition. The results show a good agreement between the two methods for gasoline passenger cars＇ HC emission for all 1VE subsectors and technology classes. In the case of CO emissions, the modeled results were reasonably good, although systematically underestimate the emissions by almost 12%-50% for different technology classes. However, the model totally overestimated NOx emissions. The IVE NOx emission factors were 1.5-3.5 times of the remote sensing measured ones. The IVE model was also evaluated for light duty gasoline truck, heavy duty gasoline vehicles and motor cycles. A notable result was observed that the decrease in emissions from technology class State II to State I were overestimated by the IVE model compared to remote sensing measurements for all the three pollutants. Finally, in order to improve emission estimation, the adjusted base emission factors from local studies are strongly recommended to be used in the IVE model.     

Towards eliminating systematic errors caused by the experimental conditions in Biochemical Methane Potential (BMP) tests

The Biochemical Methane Potential (BMP) test is increasingly recognised as a tool for selecting and pricing biomass material for production of biogas. However, the results for the same substrate often differ between laboratories and much work to standardise such tests is still needed. In the current study, the effects from four environmental factors (i.e. ambient temperature and pressure, water vapour content and initial gas composition of the reactor headspace) on the degradation kinetics and the determined methane potential were evaluated with a 2⁴ full factorial design. Four substrates, with different biodegradation profiles, were investigated and the ambient temperature was found to be the most significant contributor to errors in the methane potential. Concerning the kinetics of the process, the environmental factors’ impact on the calculated rate constants was negligible. The impact of the environmental factors on the kinetic parameters and methane potential from performing a BMP test at different geographical locations around the world was simulated by adjusting the data according to the ambient temperature and pressure of some chosen model sites. The largest effect on the methane potential was registered from tests performed at high altitudes due to a low ambient pressure. The results from this study illustrate the importance of considering the environmental factors’ influence on volumetric gas measurement in BMP tests. This is essential to achieve trustworthy and standardised results that can be used by researchers and end users from all over the world.     

Radon mapping by retrospective measurements - an approach based on CDs/DVDs

This article points out the ability to map retrospective ²²²Rn concentrations by home stored CDs/DVDs. The method employs the high radon absorption ability of the polycarbonate material of CDs and DVDs and their track-etch properties. The principle steps for the application of the method are addressed. The possibility for individual a posteriori calibration is studied, demonstrating that better than 10% accuracy in retrospective measurements is potentially achievable. Results from retrospective measurements in three different regions are shown, demonstrating the potential of the method for large-scale radon mapping. Comparison with independently evaluated retrospective ²²²Rn concentrations in places with known radon history was made and very good correspondence was observed. The experience indicates that the method can be used for large scale retrospective radon mapping and its applications can be expanded towards mapping of radon concentrations in water and soil gas.     

AN AUTOMATED RECORDING SYSTEM FOR EVAPORATION PANS1

ABSTRACT: ABSTRACT: An automated recording system for evaporation pans was developed to allow continuous analog type recording of pan evaporation. The system incorporates a water reservoir to supply water to the pan and can be left unattended for long periods of time. The system performed well, with very little maintenance, in a field test in northern Utah.