三氯卡班可以影响肾小管上皮细胞的屏障功能

三氯卡班(TCC)是一种被广泛应用于个人护理用品中的广谱型亲脂性杀菌剂,已在多种环境介质和生物体中检出。因其潜在的环境蓄积、生物累积和生物毒性效应,日益受到学者们的关注。借助TCC对NRK-52E(大鼠肾小管上皮细胞)的毒性暴露实验,通过检测细胞活力、以及与跨膜电阻和紧密连接相关的连接黏附分子1(JAM~(-1),junctional adhesion molecule 1)的蛋白表达水平,研究了TCC潜在的肾脏毒性效应。结果显示,10μmol·L~(-1)TCC处理48 h时培养细胞呈现不规则的集落;10μmol·L~(-1)和20μmol·L~(-1)TCC处理NRK-52E 24 h、48 h和72 h后可以显著抑制细胞生长;3.57μmol·L~(-1)TCC(生长抑制的48 hIC20)处理NRK-52E 48 h可以显著抑制细胞间紧密连接蛋白JAM~(-1)的表达量,并降低跨膜电阻,影响肾脏的屏障功能。本研究的结果能够为进一步揭示TCC对动物的毒害机制、评估其对动物的健康风险提供数据支持。     

微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收，但存在污染物去除种类有限及产能效率低的局限，近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状，对该技术现有的耦合形式进行分类，并对各种形式的耦合机理进行详细的阐释，最后对其未来的发展进行了展望。     

Identifying and modeling key trade-offs between hydrogen fuel cell and electric vehicles

Through a sensitivity analysis, the trade-off between vehicle range and CO₂ emissions is investigated as a function of electric emissions coefficient. Various powertrains were analysed for use in a small crossover sport utility vehicle. Gasoline, gasoline electric hybrid, diesel, fuel cell and battery electric vehicles (BEVs) were considered. Using various upstream fuel pathways and a model for vehicle performance, emissions and energy use were estimated. The hydrogen fuel cell vehicle was found preferable to BEVs under conditions of high CO₂ emissions per kW-hr and a high vehicle range requirement. The BEV was preferable for all other conditions.     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

Performance evaluation of reverse logistics enterprise – an agent-based simulation approach

Reverse logistics (RL) has been applied in many industries and sectors since its conception. Unlike forward logistics, retracing consumer goods from the point of consumption to the point of inception is not a well-studied process. It involves many uncertainties such as time, quality and quantity of returns. The returned products can be remanufactured, have parts harvested, or be disposed safely. It is important to implement these activities in a cost-effective manner. The aim of this research is to measure the performance of the RL enterprise with the help of an agent-based simulation model. The major entities in the RL network are considered as Agents that can act independently. There are several different agents: collector agent, sorting-cum-reuse agent, remanufacturing agent, recycler agent, supplier agent and distributor agent. The individual performances of the agents are measured and recommendations are given to improve their performance, leading to the enhancement of the total performance of the RL enterprise. The approach is applied to a case study involving cell phone remanufacturing.     

3种镉超富集植物毛状根体系对镉胁迫响应的比较

近年来,转基因毛状根组织被越来越多地应用于重金属和有机污染物的植物修复技术研究中,已成为进行污染物毒性响应机制研究的便捷的实验室工具。为了探究龙葵、油菜、芥菜3种镉(cadmium,Cd)超富集植物对Cd毒性胁迫响应的差异,以诱导出的3种植物毛状根为研究材料,从毛状根的生长状态、富集Cd的能力、根组织细胞的凋亡程度和抗氧化酶活性等方面进行了探讨。结果表明:Cd浓度为0~50μmol·L-1时,龙葵、油菜、芥菜毛状根受Cd毒害的影响都不明显;Cd浓度为75~100μmol·L-1时,龙葵、油菜、芥菜毛状根均表现出对Cd胁迫的防御响应。在较高的Cd浓度(100μmol·L-1)下,龙葵毛状根的生物量受Cd毒害的影响最小,芥菜次之,油菜受影响最大;同时龙葵毛状根富集的Cd含量最高(745.0μg·g-1),芥菜次之(681.4μg·g-1),油菜最差(505.2μg·g-1)。龙葵、油菜、芥菜毛状根在Cd胁迫下的细胞凋亡水平均随Cd浓度的升高而升高,当Cd浓度为100μmol·L-1时,龙葵毛状根比油菜和芥菜毛状根的细胞凋亡程度均低。同时3种植物毛状根在不同浓度Cd处理下抗氧化酶活性的变化有一定差异。从上述结果综合来看,龙葵毛状根受Cd毒害的影响最小、富集Cd的能力最好,是进一步开展Cd超富集植物转基因改造研究的较好的实验室载体。     

直接投菌法在城市重污染河流治理中的应用研究

在无截污和清除内源的情况下,对深圳市甘坑河采用梅花式接种法将本源微生物菌剂分两次直接接入河流水体及底泥中。结果表明,第1次接种后的4 d内各项水质指标都不稳定,4 d后,悬浮物、COD、TP和NH3-N等浓度下降,水质明显改善;但从第8天开始,COD、NH3-N和TP的去除率同时下降,本源微生物的处理效率开始降低,需进行第2次接种;第2次接种后,DO浓度提升至2.0 mg/L以上,COD、TP和NH3-N的去除率分别保持在40%、30%和40%以上。结果表明,直接投菌法在城市重污染河道治理中可以初步消除河道的黑臭现象,修复水质。     

重金属Cr(Ⅵ)、Pb及Cu胁迫对双齿围沙蚕体腔细胞的DNA损伤

为探讨重金属Cr(Ⅵ)、Pb以及Cu对沙蚕体腔细胞DNA的毒性效应,以双齿围沙蚕为受试动物,重金属按不同剂量水平,Cr(Ⅵ):10、100和200 mg· L-1,Pb:5、50和100 mg·L-1,Cu:1、10和20 mg· L-1,分别胁迫沙蚕24 h,以不加任何重金属离子的海水为对照,采用单细胞凝胶电泳技术,检测其体腔细胞DNA损伤程度.结果表明,与空白对照组相比,3种重金属离子的各浓度组都能引起沙蚕体腔细胞DNA损伤,且3种重金属胁迫浓度与细胞DNA损伤程度之间存在显著的剂量-效应关系.双齿围沙蚕可以作为单细胞凝胶电泳的实验材料用于重金属所致环境污染的生物监测指示生物.     

甲苯对UASB反应器中溶解性微生物产物的影响

以乙酸钠为外加碳源,考察了UASB反应器内甲苯对可溶性微生物产物（SMP）的影响。实验结果表明：低质量浓度（20~70 mg/L）的甲苯对微生物有刺激作用,使得污泥增殖速率变小,SMP的质量浓度也逐渐减少,经过一段时间的驯化后,系统COD和TOC的去除率分别达到93%和94%以上,下降趋势较小；较高质量浓度（70~200 mg/L）的甲苯对微生物有抑制作用,污泥活性下降,反应器运行状况开始恶化,SMP的质量浓度也逐渐增大,经过一段时间的驯化后,系统COD和TOC的去除率分别维持在81%和83%以上；当甲苯质量浓度超过200 mg/L时,表现为污泥活性严重下降,对COD的去除效果极差。     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.