首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   294篇
  免费   48篇
  国内免费   140篇
安全科学   29篇
废物处理   56篇
环保管理   26篇
综合类   221篇
基础理论   43篇
污染及防治   92篇
评价与监测   14篇
社会与环境   1篇
  2023年   8篇
  2022年   8篇
  2021年   8篇
  2020年   10篇
  2019年   6篇
  2018年   10篇
  2017年   12篇
  2016年   22篇
  2015年   21篇
  2014年   23篇
  2013年   37篇
  2012年   46篇
  2011年   33篇
  2010年   27篇
  2009年   26篇
  2008年   20篇
  2007年   13篇
  2006年   31篇
  2005年   16篇
  2004年   19篇
  2003年   22篇
  2002年   11篇
  2001年   7篇
  2000年   7篇
  1999年   9篇
  1998年   8篇
  1997年   5篇
  1996年   7篇
  1995年   3篇
  1994年   4篇
  1991年   1篇
  1986年   2篇
排序方式: 共有482条查询结果,搜索用时 53 毫秒
11.
树脂固载纳米铁对偶氮染料直接湖蓝5B的脱色性能研究   总被引:4,自引:1,他引:3  
以FeSO4和NaBH4水溶液为前驱溶剂,以聚苯乙烯型阳离子交换树脂为载体,制备了树脂固载的纳米铁,室温下用于对偶氮染料直接湖蓝5B水溶液进行脱色研究。研究结果发现,脱色反应遵循准一级反应动力学,在初始pH为3~10的范围内,反应进行14 m in时,50 mg/L的染料溶液脱色率均能达到83%以上。固载的纳米铁材料可多次重复利用,溶液中释放的铁离子浓度不超过0.1 mg/L。  相似文献   
12.
采用HZ-16型大孔树脂对含三(三溴苯氧基)三嗪(RDT-8)废水进行吸附及脱附处理。实验结果表明:在废水流量为4.0 BV/h的条件下,树脂最佳吸附工艺条件为出水体积88.0 BV,此条件下出水COD小于291 mg/L,挥发酚质量浓度小于0.08 mg/L;在脱附液流量为0.5 BV/h的条件下,树脂最佳脱附工艺条件为脱附液体积3.0 BV,此条件下脱附液中挥发酚质量浓度为30.6 mg/L,挥发酚脱附率高达76.4%。在最佳吸附-脱附工艺条件下,连续进行10次动态吸附-脱附实验,吸附出水中COD为137~294 mg/L,COD去除率为72.5%~89.1%,挥发酚质量浓度稳定在0.05 mg/L以下,挥发酚去除率为99.8%~100%,说明HZ-16型大孔树脂的吸附-脱附性能稳定。  相似文献   
13.
氨化松香基交联聚合树脂对水中诺氟沙星的吸附性能   总被引:2,自引:1,他引:1  
将松香基功能高分子进行胺基化得到氨化松香基交联聚合树脂(aminated rosin-based resin,ARBR),采用扫描电镜(SEM)、红外光谱(FTIR)和比表面分析(BET)对ARBR进行了表征.利用ARBR树脂对水中诺氟沙星(NOR)吸附去除,系统研究了树脂投加量、pH值、接触时间、离子强度和温度等因素对NOR吸附性能的影响.结果表明,pH在2.0~6.0范围内,ABRA对NOR的去除效果随着溶液pH值的增加而升高,在8~10之间则呈现下降趋势;共存离子溶液的存在对ARBR去除NOR的行为总体上表现为促进作用.ARBR对水中诺氟沙星的吸附动力学过程符合准二级动力学模型.Langmuir等温吸附模型可较好地描述ARBR对水中NOR的吸附过程,理论最大吸附量为30.29 mg·g~(-1)(pH 6.0、20℃).吸附热力学分析表明,ARBR对水中诺氟沙星的吸附是自发吸热的过程,属于物理吸附,其吸附机制主要为氢键与静电作用.脱附再生实验发现,0.1 mol·L~(-1)HCl溶液效果明显优于其它脱附液,进一步确证了氢键在吸附中的主导作用;经过5次吸附-脱附循环后,对NOR仍具有稳定的吸附性能,可再生循环使用.对比了不同类型商品化树脂,ARBR具有较好的吸附效果.该研究结果拓展了松香高值化的应用研究领域,对开发松香在环境微污染控制中的应用具有理论指导意义.  相似文献   
14.
Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.  相似文献   
15.
N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.  相似文献   
16.
利用表面负载的方法将有机化磁性凹土与苯乙烯、二乙烯苯等制备磁性凹土树脂;对磁性凹土树脂进行氯甲基化改性,制备出氯化磁性凹土树脂.表征了样品的形貌、结构以及表面积,研究了树脂对天然有机物(腐殖酸)的吸附性能.结果表明:氯化后的磁性凹土树脂的比表面积是原有的1.9倍,对附腐殖酸的饱和吸附能力也从原有的41.84 mg/g提高到了51.02 mg/g,这表明改性后的树脂增强了其对腐殖酸的去除能力.  相似文献   
17.
针对原有用于铜、铁、锌同位素分析的提纯步骤方法,我们专门对锌的提纯进行了改进,即在1mol/LHCl的介质条件下,采用200~400目AGMP-1M树脂提纯锌,大大简化了锌的提纯方法。在改进的实验条件下,地质样品的回收率接近100%;标准溶液在离子交换分离前后同位素组成一致,表明分离前后无Zn同位素分馏;全流程Zn的空白小于0.7ng/mL。此法可作为用于高精度Zn同位素分析的前处理方法。  相似文献   
18.
Characterizing natural organic matter (NOM), particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon (GAC) filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant (HPAC) was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.  相似文献   
19.
The adsorption behavior of p-aminobenzoic acid and o-aminobenzoic acid onto the different polymeric adsorbents was systematically investigated as a function of the solution concentration and temperature.Experimental results indicated that the equilibrium adsorption data of the four polymeric adsorbents fitted well in the Freundlich isotherm.The adsorption capacity of multi-functional polymeric adsorbent NJ-99 was the highest,which might be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of aminobenzoic acid.The adsorption capacity of o-aminobenzoic acid onto any adsorbent was higher than p-aminobenzoic acid.Thermodynamic studies suggested the exothermic,spontaneous physical adsorption process.Adsorption kinetics results showed that the adsorption followed the pseudo-second-order kinetics model and the intraparticle mass transfer process was the rate-controlling step.  相似文献   
20.
树脂基固态胺吸附剂室温下对低浓度CO2的吸附性能研究   总被引:2,自引:1,他引:1  
以大孔甲基丙烯酸酯吸附树脂为载体,聚乙烯亚胺(PEI)为有机胺,采用液相浸渍法制备出固态胺吸附剂,并研究了其在室温下对低浓度CO2的吸附行为.同时,利用氮气吸附、热重分析和扫描电镜表征了材料的物理化学性质,并采用热重法和固定床吸附法考察了材料的CO2吸附性能.结果表明,大孔树脂担载50%PEI(质量分数)时吸附性能最佳,对纯CO2的最大吸附量为175 mg·g-1;CO2的吸附行为由扩散动力学与吸附热力学共同决定,低温有利于提高吸附容量;吸附剂对400 ppm~15%浓度的CO2都具有优异的动态吸附性能,其中对400 ppm CO2的吸附量达到86 mg·g-1,对15%CO2的吸附量达到150 mg·g-1;湿度对吸附起促进作用,相对湿度为10%时,对400 ppm CO2的吸附量提高至139mg·g-1;吸附剂具有优异的循环性能,具有直接空气捕集CO2的潜力.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号