COMPARING METHODS OF HYDROLOGIC REGIONALIZATION1

ABSTRACT: Data splitting is used to compare methods of determining “homogeneous” hydrologic regions. The methods compared use cluster analysis based on similarity of hydrologic characteristics or similarity of characteristics of a stream's drainage basin. Data for 221 stations in Arizona are used to show that the methods, which are a modification of DeCoursey's scheme for defining regions, improve the fit of estimation data to the model, but that is is necessary to have an independent measure of predictive accuracy, such as that provided by data splitting, to demonstrate improved predictive accuracy. The methods used the complete linkage algorithm for cluster analysis and computed weighted average estimates of hydrologic characteristics at ungaged sites.     

ESTIMATION OF PRE- AND POST-DEVELOPMENT NONPOINT WATER QUALITY LOADINGS1

ABSTRACT: A simple procedure for estimating pre- and post-development water quality loadings from residential communities is discussed. The procedure deals with: (a) gathering basic water quality loading numbers observed by others at several watersheds with various land uses; (b) obtaining the breakdown of proposed land uses at various phases of the community development; and (c) estimating pre- and post-development water quality loading numbers by taking the weighted average of the basic loading numbers in terms of areal coverages of different land uses at various phases of development. Results of this simplified procedure have been verified indirectly by comparing them with the estimates derived independently through a more fundamental but time-consuming approach. The procedure was used to evaluate the anticipated water quality impact of two future residential communities in South Florida by analyzing four water quality parameters: Suspended Soils (SS), Total Nitrogen (TN), Total Phosphorus (TP), and Biochemical Oxygen Demand (BOD₅). Although computation of loading numbers with mixed land uses is not an exact science at the present time, the recommended approach appears to be the best available technique to analyze quantitatively the water quality-quantity-land use interactions.     

Outlier identification and visualization for Pb concentrations in urban soils and its implications for identification of potential contaminated land

Outliers in urban soil geochemical databases may imply potential contaminated land. Different methodologies which can be easily implemented for the identification of global and spatial outliers were applied for Pb concentrations in urban soils of Galway City in Ireland. Due to its strongly skewed probability feature, a Box–Cox transformation was performed prior to further analyses. The graphic methods of histogram and box-and-whisker plot were effective in identification of global outliers at the original scale of the dataset. Spatial outliers could be identified by a local indicator of spatial association of local Moran's I, cross-validation of kriging, and a geographically weighted regression. The spatial locations of outliers were visualised using a geographical information system. Different methods showed generally consistent results, but differences existed. It is suggested that outliers identified by statistical methods should be confirmed and justified using scientific knowledge before they are properly dealt with.     

Risk factors for driving into flooded roads

Motor vehicle-related deaths account for more than half of all flood fatalities in the United States, but to date, very little is known about the risk factors associated with why people drive into flooded roads. Using data from survey questionnaires administered in Denver, CO, and Austin, TX, this paper suggests that people who do not take warnings seriously are more likely to drive through flooded roads, as are people aged 18–35, and those that do not know that motor vehicles are involved in more than half of all flood fatalities. In Denver, people who have not experienced a flood previously and those who do not know they live in flood-prone areas are also more likely to drive into flooded roads.     

关于植物中氟化物测定结果的计算

针对植物中氟化物测定时由于绘制校准曲线的标准溶液体积与分析样品的定容体积不一样而引出的结果计算时的某些问题，提出了正确的计算方法和建议。     

基于社会科学统计程序(SPSS)回归性分析的尾矿库事故预测模型

基于社会科学统计程序(SPSS)软件的分析功能,对调查研究中获取的尾矿库案例进行数据提炼和分类编码,找出相关因子并进行回归性分析。最终目的是找出尾矿库各个因素的内在联系,建立简单的尾矿库事故模型,从而可以初步预测尾矿库事故发生的可能性。该预测模型为尾矿库事故的研究提出了新方法,对于防灾减灾以及保护人民生命财产安全起到了积极作用。     

中国省际能源效率差异及其影响因素分析

我国省际能源效率存在较大的差异.要进一步促进能源综合利用,需要在区域层面对能源效率差异形成的因素作更加全面深入的研究,以寻求更加合理有效的促进宏观能源效率改进的理论与方法.本文基于2007年的截面数据,运用能很好地消除各因素间多重共线性的偏最小二乘回归建模,选取了14个变量来代表经济发展水平、产业结构、工业结构、能源消费结构、对外开放程度、投资水平、政府影响力、制度因素、能源价格和地理因素这10个因素,分析了各因素对能源效率地区差异的影响方向和影响程度.研究结果表明,各地区固定资产投资中外商投资比重、工业增加值中高耗能产业比重以及煤炭消费比重的差异是造成能源效率地区差异显著的主要原因.这说明投资水平、工业结构和能源消费结构是造成能源效率地区差异显著的主要因素.要在短期内缩小地区间的能源效率差距,必须严格限制某些地区高耗能行业的过快发展,加强高耗能行业的结构调整,加快淘汰落后产能,大力提升煤炭的使用效率.     

室内甲醛污染影响因素的多元回归分析

本文在室内甲醛质量守恒定律基本公式合理推导的基础上，对影响甲醛浓度的主要因素做了正交实验。对实验数据进行多元回归分析，建立室内甲醛浓度预测模型。对模型做检验，检验结果表明，本文的预测模型能较好地预测室内空气中的甲醛浓度。     

Estimated Injury Risk for Specific Injuries and Body Regions in Frontal Motor Vehicle Crashes

Objective: Injury risk curves estimate motor vehicle crash (MVC) occupant injury risk from vehicle, crash, and/or occupant factors. Many vehicles are equipped with event data recorders (EDRs) that collect data including the crash speed and restraint status during a MVC. This study's goal was to use regulation-required data elements for EDRs to compute occupant injury risk for (1) specific injuries and (2) specific body regions in frontal MVCs from weighted NASS-CDS data.

Methods: Logistic regression analysis of NASS-CDS single-impact frontal MVCs involving front seat occupants with frontal airbag deployment was used to produce 23 risk curves for specific injuries and 17 risk curves for Abbreviated Injury Scale (AIS) 2+ to 5+ body region injuries. Risk curves were produced for the following body regions: head and thorax (AIS 2+, 3+, 4+, 5+), face (AIS 2+), abdomen, spine, upper extremity, and lower extremity (AIS 2+, 3+). Injury risk with 95% confidence intervals was estimated for 15–105 km/h longitudinal delta-Vs and belt status was adjusted for as a covariate.

Results: Overall, belted occupants had lower estimated risks compared to unbelted occupants and the risk of injury increased as longitudinal delta-V increased. Belt status was a significant predictor for 13 specific injuries and all body region injuries with the exception of AIS 2+ and 3+ spine injuries. Specific injuries and body region injuries that occurred more frequently in NASS-CDS also tended to carry higher risks when evaluated at a 56 km/h longitudinal delta-V. In the belted population, injury risks that ranked in the top 33% included 4 upper extremity fractures (ulna, radius, clavicle, carpus/metacarpus), 2 lower extremity fractures (fibula, metatarsal/tarsal), and a knee sprain (2.4–4.6% risk). Unbelted injury risks ranked in the top 33% included 4 lower extremity fractures (femur, fibula, metatarsal/tarsal, patella), 2 head injuries with less than one hour or unspecified prior unconsciousness, and a lung contusion (4.6–9.9% risk). The 6 body region curves with the highest risks were for AIS 2+ lower extremity, upper extremity, thorax, and head injury and AIS 3+ lower extremity and thorax injury (15.9–43.8% risk).

Conclusions: These injury risk curves can be implemented into advanced automatic crash notification (AACN) algorithms that utilize vehicle EDR measurements to predict occupant injury immediately following a MVC. Through integration with AACN, these injury risk curves can provide emergency medical services (EMS) and other patient care providers with information on suspected occupant injuries to improve injury detection and patient triage.