赤泥碱性调控研究进展

赤泥是氧化铝工业生产过程产生的强碱性固体废弃物,资源化利用难、环境风险高,严重制约了氧化铝行业的可持续发展.赤泥土壤化是实现规模化处置赤泥的一种可行方法,而碱性调控则是赤泥土壤化的关键环节.论文在综述氧化铝生产过程碱性物质形成过程的基础上,从可溶性碱和化学结合碱角度分析了赤泥碱性物质的赋存状态,阐述了国内外化学调碱法和生物调碱法的研究进展和碱性转化机制,剖析了赤泥碱性调控方面存在的问题,提出了赤泥碱性调控研究的发展方向.这将为赤泥规模化处置和堆场生态重建、保障氧化铝工业的健康发展提供科学参考.     

蜂窝煤灰渣对酸性和石灰性污染土壤中重金属的稳定研究

本研究的目的是探讨不同洗涤蜂窝煤灰渣在不同酸碱性土壤中对重金属的稳定效果.在酸性的淳安土壤(铅、镉、铜、锌污染)和石灰性的济源土壤(铅、镉污染)中以4%用量加入灰渣,培养60 d后测定土壤性质.结果表明,灰渣对淳安土壤pH和EC值的增加效果要大于对济源土壤的影响.原灰渣、硫酸洗灰渣和盐酸洗灰渣加入淳安土壤均可显著降低土壤DTPA提取态铅、镉、铜和锌的含量(p0.05),灰渣对济源土壤DTPA提取态重金属的含量影响较小.对于济源土壤,硫酸洗和盐酸洗灰渣与磷酸盐结合施用后土壤DTPA-Pb含量分别下降20.9%和33.1%.对于淳安土壤,加入3类灰渣后土壤DTPA-Pb含量下降26.8%~41.8%;对于淳安土壤,不论是单独施用还是与磷酸盐结合施用,硫酸洗灰渣对铜、锌稳定效果均强于盐酸洗灰渣.以上结果说明,蜂窝煤灰渣在酸性土壤中对重金属有更强的稳定作用,硫酸洗灰渣和盐酸洗灰渣对土壤重金属的稳定作用存在差异.     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.     

催化裂解法处理有机硅高沸物

采用催化裂解法处理有机硅高沸物,解决高沸物储存过程中的安全、环保问题。研究了催化剂种类、HCl加入量和精馏高沸物加入量对高沸物转化率的影响。实验结果表明:在以N,N-二丁基-1-丁胺为催化剂、合成高沸物为原料、HCl加入量为13%(w)的条件下,高沸物转化率为83.10%,二甲基二氯硅烷收率为23.78%;合成高沸物中精馏高沸物加入量为9.0%(w)时,高沸物转化率最高,为85.58%。     

Batch sorption dynamics and equilibrium for the removal of lead ions from aqueous phase using activated carbon developed from coffee residue activated with zinc chloride

Lignocellulosic materials are good precursors for the production of activated carbon. In this work, coffee residue has been used as raw material in the preparation of powder activated carbon by the method of chemical activation with zinc chloride for the sorption of Pb(II) from dilute aqueous solutions.The influence of impregnation ratio (ZnCl₂/coffee residue) on the physical and chemical properties of the prepared carbons was studied in order to optimize this parameter. The optimum experimental condition for preparing predominantly microporous activated carbons with high pore surface area (890 m²/g) and micropore volume (0.772 cm³/g) is an impregnation ratio of 100%. The developed activated carbon shows substantial capability to sorb lead(II) ions from aqueous solutions and for relative impregnation ratios of 75 and 100%, the maximum uptake is practically the same. Thus, 75% represents the optimal impregnation ratio.Batch experiments were conducted to study the effects of the main parameters such as contact time, initial concentration of Pb(II), solution pH, ionic strength and temperature. The maximum uptake of lead(II) at 25 °C was about 63 mg/g of adsorbent at pH 5.8, initial Pb(II) concentration of 10 mg/L, agitation speed of 200 rpm and ionic strength of 0.005 M. The kinetic data were fitted to the models of pseudo-first order and pseudo-second order, and follow closely the pseudo-second order model. Equilibrium sorption isotherms of Pb(II) were analyzed by the Langmuir, Freundlich and Temkin isotherm models. The Freundlich model gives a better fit than the others.Results from this study suggest that activated carbon produced from coffee residue is an effective adsorbent for the removal of lead from aqueous solutions and that ZnCl₂ is a suitable activating agent for the preparation of high-porosity carbons.     

Development of an analytical method for analysis of flubendiamide,des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v^?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v^?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg^?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare^?1 were 0.83 and 1.68 mg kg^?1,respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha^?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha^?1 were below detectable level (BDL, < 0.01 mg kg^?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical–chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal.     

气相色谱法测定苯酚生产废水中芳香族化合物

建立了用气相色谱法同时测定苯酚生产废水中异丙苯、α-甲基苯乙烯、α-甲基苯甲醇、2-苯基-2-丙醇、苯酚、苯乙酮、2-苯基丙醛等7种芳香族有毒有机污染物的定量分析方法。采用二氯甲烷对水样进行萃取后进行分析测定,气相色谱条件:DB-WAX型色谱柱,FID检测器,程序升温,进样量1μL。方法的检出限、精密度、回收率实验表明,该方法对苯酚生产废水中各污染物组分具有较好的分离效果,对7种物质的检测限均低于0.05 mg/L,5次测定的相对标准偏差小于5%,实际水样的加标回收率大于97%。     

基于石墨烯构建的电化学传感器在环境监测中的应用

综述了基于石墨烯构建的电化学传感器在重金属、有毒气体、农药残留、酚类有机污染物等对环境造成一定危害的物质检测中的应用,并展望了石墨烯电化学传感器在环境监测领域中的发展。     

污水污泥裂解及其性能的研究

以碘吸附值为裂解残渣吸附性能的指标，通过单因素实验和正交实验，确定了制备裂解残渣的最佳工艺条件，并对残渣的表面元素组成、孔结构组成、晶相组成和吸附性能等性质进行了表征。结果显示：以浓度均为5 mol/L的ZnCl₂和H₂SO₄作活化剂、复配比2∶1、活化温度600℃、活化时间1 h、固液比1∶2.5，制得的裂解残渣酸洗后碘值平均值可达892.8 mg/g；用制备的裂解残渣对苯酚废水进行处理，室温下振荡5 min，苯酚去除率即可达到87.9%，且符合Langmuir吸附等温线方程和Freundlich吸附等温线方程。