Graphical strategies for design of evaporation crystallization networks for environmental wastewater applications

This paper introduces graphical strategies for the design of an evaporation/crystallization network for ternary wastewater environmental applications. Sources, sinks and other streams are located on a ternary composition diagram. While a source is any wastewater stream that has the potential to be recycled, a sink is any unit in the process that can accept sources. The proposed methodology is extremely simple to understand and implement, as it only requires basic solid-liquid phase equilibria data and uses lever arm principles to generate alternative process designs. Geometric constructions are carried out on the ternary composition diagram and the respective lever arms are used to determine intermediate flow rates in the evaporation/crystallization network. The relative locations and flow rates of the sources and sinks under consideration, as well as the unique shape of the solid-liquid equilibrium, drive the design of the separation (via evaporation/crystallization) network. Some generic structures are proposed for a typical evaporation and crystallization network. Once the general problem statement has been defined, special cases consisting of a single source-single sink, single source-two sinks and two sources-single sink are described. These special cases are representative of commonly occurring industrial wastewater design problems. Several graphical insights are listed that allow one to represent evaporation and crystallization operations on a ternary triangular composition diagram and avoid mathematical complexity. The possibility of bypassing a part of the initial feed streams is also considered. Certain feasible composition regions are identified on the ternary composition diagram for cases dealing with multiple sources and sinks. The methodology is useful in pre-screening and eliminating certain sources/sinks and is readily applicable to cases with lower number of sources and sinks. A case study involving the ammonium nitrate manufacturing process is included to demonstrate the broad applicability and value of the proposed approach.     

利用粉煤灰制备高纯超细氧化铝粉体的研究

利用粉煤灰为原料制备高纯超细氧化铝粉体。给出了采用硅酸二钙晶相转变自粉化、高效分散剂———碳化法从粉煤灰中制备氧化铝方法的工艺路线 ,确定了从粉煤灰制备高纯超细氧化铝粉体的最佳工艺条件 ,为粉煤灰的高价值利用开辟了一条新途径     

聚合铝的凝聚絮凝特征及作用机理

采用不同碱化度B(OH/Al)值的聚合铝和AlCl_3对高岭土悬浊液进行凝聚絮凝实验,同时测定电泳度及表面吸附特征,结合不同铝盐的化学形态分布,探讨聚合铝的高效凝聚作用原理.并求得表面吸附覆盖率,电位变化与形态分布间的定量关系,绘出聚合铝的凝聚区域图,对阐明聚合铝的作用机理提供了实验依据.     

基于主逻辑图的安全风险建模研究

概率风险评估已成为研究复杂系统安全风险较为成熟的方法 ,其风险模型的建立是基于故障树/事件树的 ,风险分析具有众多的静态特性。然而 ,大的复杂系统往往存在诸多动态因素 ,在风险研究需要考虑这些动态因素的情况下 ,基于传统故障树 /事件树的模型则难以提供支持。笔者对此进行了分析 ,提出了基于主逻辑图的安全风险建模 ;主要介绍了主逻辑图的概念及其建模方法 ,并对模型进行了分析 ;在此基础上 ,基于主逻辑图分析事故场景 ,对场景风险的量化评估进行了简要介绍 ,并结合某核反应堆例子进行了分析。     

循环流化床锅炉床温控制方法

就目前电厂循环流化床锅炉运行中存在的床温波动问题，讨论了导致床温波动的因素，并针对性地提出了控制床温的一些措施。     

Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

安庆石化热电厂正压浓相气力输灰系统

详细介绍了安庆石化热电厂正压浓相气力输灰系统的组成、特点及运行情况。该系统自投运以来，运行情况良好。     

事故前期发展过程浅析

任何事故发生之前都有一段发展演变的过程.当失误不断积累,超过系统或组织自身的自适应能力以后,一旦激发事件出现,就有可能导致事故的发生.本文在分析事故致灾条件的基础上,将其前期发展过程分为了7个阶段,得出了事故前期发展过程流程图.     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。     

树脂相分光光度法测定水中痕量苦味酸

建立了树脂相分光光度法测定水中痕量苦味酸的新方法。该法灵敏度高,表观摩尔吸光系数为1.08×105L/(mol·cm);精密度理想(测定苦味酸质量浓度为5μg/mL的实验5次,相对标准偏差为1.0%);线性范围为0～7.0μg/mL;以3σ衡量,检出限为0.14μg/mL;加标回收率为97%～103%。采用该法直接测定水样中的苦味酸、间接测定烟草中的烟碱,结果令人满意。