Biosynthesis and Characterization of Laccase Catalyzed Poly(Catechol)

Enzymatic polymerization of catechol was conducted batch-wise using laccase enzyme produced by the culture Trametes versicolor (ATCC 200801). The polymerization reaction was carried out in 1:1 (v/v) aqueous-acetone solution, buffered at pH 5.0 with sodium acetate (50 mM) in a sealed, temperature-controlled reactor at 25°C. The molecular weight of the produced polymer was determined with GPC. FT-IR, DSC, and TGA were employed to investigate the structure and thermal behavior of synthesized poly(catechol). It was found that catechol units were linked together with ether bonds and thermal stability of the catechol increased in the poly(catechol) polymeric structure effectively. The number average molecular weight of poly(catechol) was found as 813 ± 3 Da with a very narrow polydispersity value of 1.17 showing selective polymerization of catechol by the enzyme.     

具有特定拓扑结构的聚烯烃高分子的合成

具有特定拓扑结构的聚合物合成一直是高分子合成化学领域的一个重要研究内容，设计和合成具有特定拓扑结构的聚烯烃高分子更是进一步发掘聚烯烃这一量大面广的通用高分子材料的性能、开拓其新的应用领域的重要手段。在催化剂和聚合方法的研究取得重要进展的基础上，近年来国际上在合成不同拓扑结构（包括嵌段、接枝、梳型和星型）的聚烯烃高分子研究方面发展也较快，所合成的部分高分子亦显示出独特的功能性。本文首先综述不同拓扑结构聚烯烃高分子合成的研究现状，然后结合近期化学所在此领域的研究进展，提出独特的以苯乙烯封端反应性聚烯烃为模块构建拓扑结构聚烯烃的新思路。     

负载型纳米TiO2光催化剂的制备及其光催化活性

采用悬浮聚合法制备粉煤灰-聚苯乙烯微珠载体，通过矿化接枝技术将水热法制备的纳米TiO2负载在粉煤灰-聚苯乙烯微珠载体上，制成负载型纳米TiO2光催化剂。用x射线衍射仪、扫描电子显微镜对负载型纳米TiO2光催化剂进行了表征；通过光催化降解甲醛实验评价了负载型纳米TiO2光催化剂的活性。实验结果表明，纳米TiO2在载体上分散良好，平均粒径为36．4nm；该催化剂活性较高，明显优于粉体纳米TiO2光催化剂，重复使用10次左右，该催化剂的活性无明显下降。     

聚(苯乙烯-甲基丙烯酸)复合磁性微球的吸附性能

以共沉淀法制备纳米Fe3O4,通过分散聚合法制备了磁性聚(苯乙烯-甲基丙烯酸)(Fe3O4@P(St-MMA))微球,采用光学显微镜、红外光谱、样品磁力振荡计和X射线衍射(XRD)对磁性微球进行了表征。考察了复合磁性微球在不同的p H、离子强度和吸附时间等条件下对其吸附性能的影响,运用吸附动力学和吸附等温线研究了磁性微球对亚甲基蓝的表面吸附机理。结果表明,制备的磁性微球粒径在100~200μm之间,表面含有羧基,饱和磁化强度为9.44 emu/g,在外加磁场的作用下能够快速分离出来。亚甲基蓝的吸附符合准二级动力学模型,在100 min内基本达到吸附平衡;25℃下,最大吸附量高达144.9 mg/g,且吸附随着p H值的升高而增加,当p H7时,吸附量基本不变;随着离子强度增加,吸附量逐渐下降;Langmuir等温线能比较好地拟合磁性微球对溶液中亚甲基蓝的吸附。     

羧甲基纤维素抑尘剂的制备及其应用研究

以羧甲基纤维素、丙烯酸丁酯、甲基丙烯酸甲酯为原料,用溶液聚合法制备出一种环保软膜抑尘剂.探讨了添加甘油、辛癸基葡糖苷对抑尘剂吸水性能、润湿性能的变化以及m(甘油):m(辛癸基葡糖苷)以不同配比加入抑尘剂后对粉尘含水率的影响.经傅里叶红外光谱、X-射线衍射仪、扫描电子显微镜、透射电子显微镜对制备的产物进行结构表征和形貌的分析.对抑尘剂的性能:耐风蚀性、温度适应性进行了测试.结果表明:当m(甘油):m(辛癸基葡糖苷)为2:3,室温时粉尘含水率达15.8%、50℃粉尘含水率仍可达11.7%;经3 h(15 m/s)风速吹扫,粉尘损失率仅为2.3%.     

应用CAMEO软件包预测聚合反应器丙烯泄漏影响范围

为了能够准确地预测聚合反应器发生泄漏时丙烯的扩散分布,提高应急救援工作效率,应用CAMEO软件包进行预测,通过该软件包中ALOHA、MARPLOT软件连用,解决了量化和图形显示问题。     

Performances of biological aerated filter employing hollow fiber membrane segments of surface-improved poly （sulfone） as biofilm carriers

Using the surface of poly （sulfone） hollow fiber membrane segments as grafted layer, the hydrophilic acrylamide chain was grafted on by UV-photoinduced grafting polymerization. The gained improvement of surface wettability for the modified membrane was tested by measuring the contact-angle as well as FTIR spectra. Then correlation between the hydrophilic ability of support material and the biofilm adherence ability was demonstrated by comparing the pollutant removal rates from urban wastewater via two identical lab-scale up-flow biological aerated filters, one employed the surface wettability modified poly （sulfone） hollow fiber membrane segment as biofilm carder and the other employed unmodified membrane segment as biofilm carder. The experimental results showed that under the conditions of influent flux 5 L/h, hydraulic retention time 9 h and gas to liquid ratio （G/L） 10： 1, the removal rates of chemical oxygen demand （COD） and ammonium nitrogen （NH4^＋-N） for the modified packing filter and the unmodified packing filter was averaged at 83.64% and 96.25%, respectively, with the former filter being 5%-20% more than the latter. The effluent concentration of COD, NH4^＋-N and turbidity for the modified packing filter was 25.25 mg/L, 2 mg/L and 8 NTU, respectively. Moreover, the ammonium nitrogen removal performance of the filter packing the modified PSF was compared with the other bioreactor packing of an efficient floating medium. The biomass test indicated that the modified membrane matrixes provided better specific adhesion （3310-5653 mg TSS/L support）, which gave a mean of 1000 mg TSS/L more than the unmodified membrane did. In addition, the phenomenon of simultaneous denitrification on the inner surface of the support and nitrification on the outer surface was found in this work.     

Beijing Tong Ren Tang Company Limited Scientific Research Institute, Beijing 100011, China

By dynamic method under UV irradiation,commercial melt-blown polypropylene(PPMB)filter element was modified with acrylamide(AAm)using benzophenone(BP)as initiator.Attenuated total reflection-Fourier transform infrared spectroscopy and scanning electron microscope verified that polyacrylamide chain was grafted on the fiber surface of PPMB filter element.Elemental content analysis with energy dispersive X-ray of fibers revealed that the polymerization content in the inner part of filter element was relatively higher than that in the outer.Degree of grafting changed with initiator concentration,monomer concentration,reaction temperature and reached 2.6% at the reaction condition:C_(BP)=0.06 mol/L,C_(AAm)=2.0 mol/L,irradiation time:80 min,temperature: 60℃.Relative water flux altered with the hydrophilicity and pore size of filter element.In the antifouling test,the modified filter gave greater flux recovery(approximately 70%)after filtration of the water extract of Liuweidihuang,suggesting that the fouling layer was more easily reversible due to the hydrophilic nature of the modified filter.     

磁性离子印迹聚合物的制备及其对水中Pb(Ⅱ)的吸附

以铅离子为模板离子、乙二醇二甲基丙烯酸酯和偶氮二异丁腈为交联剂和引发剂、稀盐酸为洗脱剂,采用微波辅助反相乳液悬浮聚合法,制备了磁性离子印迹聚合物(MIIP),通过SEM、FTIR、XRD和BET技术对其进行了表征,并将其用于水中Pb(Ⅱ)的吸附.在初始质量浓度60 mg/L、溶液pH 6、吸附温度303 K、吸附时间6...     

悬浮法氯乙烯聚合工艺的风险分析及安全技术

悬浮法聚合氯乙烯生产过程的主要风险是氯乙烯的"暴聚"事故和氯乙烯泄漏事故.聚合反应散热不足,温度过高导致"暴聚"事故.易燃易爆有毒的氯乙烯泄漏可能引发氯乙烯蒸汽云爆炸和火球(BLEVE)事故.以某PVC化工厂氯乙烯聚合釜生产为例,定量计算氯乙烯小孔泄漏量、蒸汽云及BLEVE火球的事故伤害与破坏后果.提出避免导致"暴聚"事故3种安全技术措施:良好的聚合釜反应散热降温;足够的搅拌强度和防止"粘釜"等.防止引发氯乙烯泄漏的3种途径为反应釜轴封、超压泄压时跑料和压力容器及管道的防泄漏技术.