液化天然气储罐9％镍钢焊缝相控阵AUT工艺

9％镍钢液化天然气储罐制造安装过程中,焊缝检验通常用常规射线照相（RT）进行。本文研讨用相控阵半自动超声检测（AUT）取代射线照相的工艺制定及验证方法。要领分四步：首先带缺陷专用焊接试样的制备;然后相控阵AUT工艺的编制;其次在有已知缺陷的焊接试样上,对AUTT艺作“开放性”验证试验;最后在现场对整个数据采集系统作“封闭性”操作演示和验证评定试验。验证结果表明相控阵AUT取代RT可行可靠,能凸显AUT种种优势。     

中国航油HSE管理体系建设实践

本文阐述了HSE管理体系建立的过程,对中国航油建立HSE管理体系的组织方法和质量控制措施进行了陈述,探讨了科学控制和精细化管理在企业HSE管理体系建设过程中的作用。提出适合国内石油企业的HSE管理体系建设控制方法,以最大限度的建立适宜有效的HSE管理体系。     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

Synthesis, Characterization, and Hydrolytic Degradation of Copolymers of 2-Methylene-1,3-dioxepane with Ethylene and with Styrene

2-Methylene-1,3-dioxepane (MDP) was copolymerized with ethylene (E) at a pressure of approximately 1000 psi and a temperature of approximately 70°C with AIBN as the free radical initiator. The copolymers obtained, poly(MDP-co-E), were characterized by elemental analysis, IR, ¹H-NMR and ¹³C-NMR spectroscopy, DSC, and GPC. The copolymers contained 2–15 mol% ester units. MDP was also copolymerized with styrene (S) at 120°C with di-t-butyl peroxide as the initiator to prepare the copolymer, poly(MDP-co-S). The number-average molecular weights of both types of copolymers were in the range of 6000 to 11,000, and the weight-average molecular weights were in the range of 9000 to 17,000. The melting temperatures of poly(MDP-co-E) decreased with increasing ester unit content in the copolymer. For the MDP-S copolymers, the glass transition temperatures decreased with increasing ester unit content. Both poly(MDP-co-E) and poly(MDP-co-S) were degraded by methanolysis, and their molecular weights decreased by the expected amounts based on the ester unit content.     

沉淀法回收聚苯乙烯泡沫塑料的工艺研究

研究沉淀法回收聚苯乙烯泡沫塑料(EPS)的工艺,利用石油裂解副产物为溶剂回收废旧聚苯乙烯泡沫塑料,以废治废,回收利用。溶剂低毒,对聚苯乙烯泡沫塑料溶解速度快,溶解量大,价廉易得。采用转式间歇投料并附加溶剂挥发分回收装置的工艺,溶剂回收率高,无二次污染,可循环使用。聚苯乙烯塑料(PS)回收率可达99%。     

不同停曝比对连续流亚硝化颗粒污泥运行的影响

在（25~28℃）下,接种成熟亚硝化颗粒污泥于连续流反应器,为避免通过蠕动泵的污泥回流所造成的颗粒污泥破碎,采用内置沉淀区进行内回流,调整停曝比为1：1、2：1和1：2,研究不同停曝比对连续流亚硝化颗粒污泥系统稳定性的影响.结果表明,控制停曝比为1：1和2：1,亚硝化性能良好,阶段末期亚硝酸盐积累率分别为85.2%和94.5%,控制停曝比为1：2,亚硝化性能逐渐恶化,阶段末期氨氧化率和亚硝酸盐积累率下降至64.1%和58.7%.批次试验表明,间歇曝气相对连续曝气可在一定程度上较好地抑制亚硝酸盐氧化菌（NOB）的相对活性,停曝时间越长,对NOB的活性抑制越好,但由于停曝时间过长也将导致氨氧化率降低,故在亚硝化工艺中,可采用1：1停曝比并协同其他控制条件的方式来实现连续流亚硝化工艺的长期稳定运行.污泥性能分析表明,在停曝比为1：1~1：2范围内,停曝时间越长,颗粒污泥结构越稳定,停曝时间越短,反应器内选择压较小,致使污泥沉降性能变差,部分亚硝化颗粒污泥解体,此外,胞外聚合物（EPS）化学分析及三维荧光光谱分析显示,停曝比为2：1条件下,蛋白（PN）含量较高且蛋白/多糖（PN/PS）值也较高.     

开展环评招投标 规范环评市场秩序

分析环评市场现状--利益扭曲、鱼龙混杂、机制不健全,借证环评、转包环评等现象时有发生,并论述其对环评质量所造成的危害,提出成立环评招投标机构,开展环评招投标,促进环评市场的健康发展,为环评质量的提高提供有力保证。     

不溶性淀粉黄原酸酯的制备及其处理含铬废水的研究

以玉米淀粉为原料,环氧氯丙烷为交联剂制备交联淀粉,通过正交试验优化了制备工艺条件;用交联淀粉制备不溶性淀粉黄原酸酯（ISX）,通过正交试验优化了ISX制备的工艺条件。研究表明,制备的ISX对模拟含铬废水中铬（VI）的去除率最高可达99%以上。     

关于多氯联苯测定的探讨

对PCB测定中所使用的Aroclor和单体标准品的区别、联系和使用进行了分析阐述,并对PCB测定中的气相色谱法、气相色谱质谱联用法、生物分析法、免疫分析法的优点、局限性进行了比较.对今后的PCB的测定提出了建议。     

广西发展燃料乙醇产业总体方案替代方案优选

规划环评的目的不是减小规划对环境的影响,而是通过比较,选出规划对环境影响最小的替代方案。本文运用AHP-模糊数学法,结合广西发展燃料乙醇产业总体方案,从大气环境、水环境、废弃物、资源承载力、资源能源消耗和生态环境保护等六个方面,合理选取指标,建立了方案布局合理性指标体系,并用AHP-模糊数学法对四种替代方案进行了计算,得出方案一的结果为77．44,方案二的结果为78．62,方案三的结果为78．23,方案四的结果为82．13。方案四为“零作为”方案,计算结果为环境本底参照值。论文以方案四为参照,同时结合各方案的隶属度,选出了最佳替代方案。