烟气脱硫(FGD)工程设计框架

在国家实施“总量控制”和“两控区”的重要环境保护政策下,烟气脱硫（ＦＧＤ）工程提到了可持续发展的议事日程,实施ＦＧＤ工程是投资大、直接经济效益不显著的环境工程。因此在全面论述实施ＦＧＤ工程的设计框架,即各设计阶段应考虑的几个重大因素和必须遵循的一系列规则基础上,着重对目前国内外主要的ＦＧＤ工艺进行了技术经济分析评述,提出选择ＦＧＤ工艺的８条重要原则。供重大决策参考和推动环境目标的实现。     

喷雾干燥法烟气脱硫过程的模拟试验研究

本文模拟试验研究了喷雾干燥法烟气脱硫中脱硫渣再循环利用、气体参数（ＳＯ２浓度、气速、气温）及浆液参数等对脱硫过程的影响，并分析了喷雾干燥塔内传热传质过程。本文结果将有助于改进喷雾脱硫塔的设计和操作。     

涕灭威在植物和土壤中的移动与分布

报道了涕灭威在花生、棉花、柑橘和土壤中的吸收、运转和分布。结果表明，涕灭威及其代谢物在柑橘叶子中的残留４０ｄ达到最高峰（３．４４９ｐｐｍ），可食部位的残留范围为０－０．０８９ｐｐｍ，低于美国ＥＰＡ规定的ＭＲＬ。涕灭威在土壤中降解较快，半衰期约１周。收获时土壤中的检出范围为０－０．１５７ｐｐｍ。涕灭威及其代谢物水溶性很强，且具有渗透和扩散性，因此使用不当可能造成地下水污染。     

一种新型烟气除尘脱硫脱氮一体化装置

提出了一种新型高效烟气除尘脱硫脱氮一体化装置,该装置将三种先进的技术有机结合,取得了相得益彰的效果:采用独特溢流装置的自激式除尘器进行除尘和脱硫脱氮,采用球面筛板塔进行二次除尘和脱硫脱氮,采用结构新颖的汽水分离器进行进一步除尘和脱硫脱氮。该装置不仅实现烟气的高效脱硫脱氮,而且可实现有用细微粉尘即稀有金属的回收。此类装置还可应用于矿山、化工和建材等领域中的湿法除尘。     

处理含锌铅钢铁厂粉尘的Inmetco工艺

Ｉｎｍｅｔｃｏ工艺是处理含锌铅钢铁厂粉尘的重要方法。本文在实验的基础上，对该工艺处理我国含锌铅钢铁厂粉尘的可行性和合理性作了论述。     

次级燃料还原燃烧产物内NOx的动力学特性研究

提出了在燃煤电站锅炉炉膛内添加次级燃料建立ＮＯｘ的还原区，以控制ＮＯｘ的排放，建立了描述ＮＯｘ还原动态过程的数学模型和化学动力学模型，对计算值和实测值作了比较分析。     

植物根系对镉毒害的防御及其代谢

本文采用植物根系生物量、根系内活性氧清除酶活性变化和植物表观中毒症状作指标 ,研究了 Cd毒害对草坪植物的毒性作用、根系应激反应。结果表明 ,当土壤溶液中 Cd浓度达 1.5× 10 - 3mol· dm- 3时 ,植物体内活性氧代谢、生长状况将出现异常 ,甚至出现明显的表观中毒症状。 Cd对植物体内清除酶活性的毒性强度为 CAT>SOD>POD。匍匐翦股颖 (Agrostis stolonifera)根系对 Cd毒害的抵抗作用强于多年生黑麦草 (L olium perernne)。     

云南中小型水电工程的环境保护

西部大开发为云南省中小型水电工程建设创造了条件,但目前中小型水电工程环境保护工作与国家对建设项目环境保护工作的要求存在一定的差距,必须严抓重管,切实保护西部地区的生态环境.     

昆明市城市污水处理厂现状调查和分析

对昆明市城市污水处理厂处理规模、处理工艺、纳污范围和污染物去除率、排放量、排放达标情况等进行了调查分析,提出需要解决的问题.     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.