高压脉冲放电等离子体处理活性红X-3B染料废水

采用高压脉冲放电等离子体技术对活性红X-3B染料废水进行处理,考察了废水电导率、脉冲电压、脉冲频率、针板间距以及曝气量对处理效果的影响。实验结果表明,当废水电导率为200μS/cm、脉冲电压为34kV、脉冲频率为60Hz、针板间距为15mm、曝气量为12L/h、处理时间为60m in时,活性红X-3B染料废水脱色率能达到98.6%。     

无线电引信电磁辐射能量耦合路径研究

目的为了确定外界电磁能量究竟如何进入到引信电路内部,针对无线电引信的电磁能量耦合路径进行系统研究。方法通过对多种引信进行不同形式的连续波、强电磁脉冲电磁辐照效应试验,对比引信天线、孔缝、弹体、电源模块等部位的能量耦合可能性。分析连续波、强电磁脉冲电磁环境对无线电引信作用的耦合规律。结果确定了电磁信号类型和引信接地结构是影响电磁能量耦合通道的关键因素,揭示了前门耦合是连续波电磁辐射环境的最主要方式。结论弹体或引信前端与电路共地的金属部件是强电磁脉冲辐射环境的主要能量路径,从而为无线电引信抗电磁性能加固的实施提供了有益参考。     

液相高压放电降解RB5染料废水的试验研究

随着印染工艺不断更新,大量化学分子结构复杂的化工染料应用到印染行业,使得常规的水处理工艺难以降解印染废水中的染料。本文以活性黑（RB5）染料为研究对象,采用液相高压放电产生强氧化性自由基来降解染料废水,考察反应时间、初始浓度和气体流量对RB5降解的影响,研究结果表明：在外部功率相同的情况下,浓度高染料其降解率相对较低;通入氧气量增加,产生的活性自由基和活性物质数量也增加,RB5的降解率也增大,但气流量不宜过大;高压放电产生的各种活性物质容易破坏染料发色基团的分子链,使其脱色。     

Bitter coil design methodology for electromagnetic pulse metal processing techniques

Electromagnetic pulse metal processing techniques (EPMPT) such as welding, forming and cutting have proven to be an effective solution to specific manufacturing problems. A high pulse magnetic field coil is a critical part of these technologies and its design is a challenging task. This paper describes a Bitter coil design using a newly developed methodology for a simplified analytical calculation of the coil and complementary finite element models (FE) of different complexity. Based on the methodology a Belgian Welding Institute (BWI) Bitter coil has been designed and tested by means of short circuit experiments, impedance and B-field measurements. A good agreement between the calculated and the experimental design parameters was found.     

三相电力有源滤波器（APF）控制策略的研究

介绍了有源电力滤波器控制策略,提出了PWM控制技术在电网电压畸变情况下对电网中滤波电流进行连续动态补偿。建立了PWM控制的逆变系统模型并进行仿真研究,结果验证了该控制策略能有效补偿谐波电流。     

脉冲电解法预处理酸性染料废水

研究了脉冲电解法预处理酸性偶氮类染料废水的处理效果,考察了不同工艺条件对废水COD去除率、脱色率和可生化性的影响。结果表明,脉冲电源峰值电压12 V,频率600 Hz,占空比50%的条件下电解40 min后,COD去除率可达59%,废水脱色率达91.4%,BOD5/COD由0.09提高至0.34。在相同条件下,脉冲电解法的电流效率是直流电解法的2倍左右。与现行常用的铁/碳反应床相比,脉冲电解法在成本上也具有一定的优势,应用前景较好。     

火电厂电除尘器电控系统的节能改造

电除尘器是火力发电厂的高能耗设备,从细节入手,挖掘电除尘器节能潜力,利用原有设备进行改造,采用简易脉冲供电方式和临界反电晕供电方式可以提高电除尘器电能的利用率,大幅度地降低电除尘器的能耗,实现节能。通过对电除尘器电控系统改造实例的前后电场参数进行比较,说明这种改造方法是可行的,实现了经济、节能与环保三者的兼顾与统一。     

浅析XLDM型脉冲袋式除尘器在CFB锅炉上的应用

介绍了兖矿国宏化工公司2台160 t/h CFB锅炉配套XLDM-5700型袋式除尘器的实际运行情况,从除尘效率、喷吹方式、运行能耗等方面分析了袋式除尘器的性能,并总结出XLDM型袋式除尘器最佳运行方式。     

“电改袋”技术在130t／h煤粉炉烟气除尘系统改造中的应用

介绍了“电改袋”除尘系统的工艺特征，分析了130t／h煤粉炉烟气除尘器系统改造为长袋低压脉冲袋式除尘器的技术方案。改造后，除尘器已经稳定运行1年多，各项技术指标均达到设计要求，环境效益与经济效益显著。     

Simultaneous determination of three herbicides by differential pulse voltammetry and chemometrics

A novel differential pulse voltammetry method (DPV) was researched and developed for the simultaneous determination of Pendimethalin, Dinoseb and sodium 5-nitroguaiacolate (5NG) with the aid of chemometrics. The voltammograms of these three compounds overlapped significantly, and to facilitate the simultaneous determination of the three analytes, chemometrics methods were applied. These included classical least squares (CLS), principal component regression (PCR), partial least squares (PLS) and radial basis function-artificial neural networks (RBF-ANN). A separately prepared verification data set was used to confirm the calibrations, which were built from the original and first derivative data matrices of the voltammograms. On the basis relative prediction errors and recoveries of the analytes, the RBF-ANN and the DPLS (D – first derivative spectra) models performed best and are particularly recommended for application. The DPLS calibration model was applied satisfactorily for the prediction of the three analytes from market vegetables and lake water samples.