普通防电磁辐射家居服的开发

电磁辐射随时随地不同程度地影响着人类的健康,为减少其对人们日常生活的影响,需开发普通的防电磁辐射家居服。本文介绍了普通防电磁辐射家居服的生产过程和工艺,以及生产和设计过程中应注意关键问题,生产的防电磁辐射家居服防辐射性能可达20dB,足以屏蔽电脑、微波炉等家用电器的辐射。     

气溶胶辐射效应对气象和环境影响的观测与模拟研究

选取2015年和2019年不同代表年份,结合外场观测和数值模拟,分析了天津地区不同季节不同天气(晴天、多云、霾)下,气溶胶辐射效应对整层大气透过率和地表入射太阳辐射的影响,以及这种影响在不同年份的差异.借助WRF-Chem模式模拟分析了重污染期间气溶胶辐射效应对垂直方向上气象要素廓线、边界层结构以及PM_2.5浓度的反馈机制.结果表明:霾污染可导致大气透过率明显下降,春、秋、冬不同季节,霾污染导致中午大气透过率分别下降0.09,0.11和0.09.全年平均霾污染可导致大气透过率降低约15.5%.云量的增多也可导致大气透过率明显下降,多云天气下大气透过率相比晴天减小约22.4%.霾和云对大气透过率的影响还与太阳高度角有关,当太阳高度角>60°时,霾污染导致大气透过率下降8.6%.随污染等级提高,气溶胶对太阳辐射的衰减作用也越强,天津地区空气质量分别为Ⅰ～Ⅰ级时,中午地表入射短波辐射呈稳定下降趋势,依次为484,446,439,342,328和253W/m².重污染期间,气溶胶辐射效应导致大气低层(250m以下)降温(0.8℃)增湿(3.8%...     

城市公园的冷岛效应研究——以常州市为例

在长江三角洲地区快速城市化的常州市内研究公园组成与冷岛效应的量化关系.基于Landsat 8TIRS和天地图高分辨率遥感影像提取公园指标以及冷岛效应指标.使用辐射传输方程法反演研究区的地表温度,使用ArcGIS的缓冲区分析和分段回归的方法研究每个公园的地表温度、降温范围和降温幅度作为冷岛效应指标;提取公园的周长、面积,并计算融合指数作为公园组成指标,在天地图高清遥感影像中提取公园的绿地覆盖率、水体覆盖率、不透水面覆盖率以及乔木覆盖率作为公园地表覆盖指标.通过相关性分析和回归模型研究,发现公园的面积为26hm²、周长阈值为3600m,公园的面积和周长在阈值范围内能够发挥较强的降温效率,超过阈值则降温效率下降.公园的融合指数与冷岛效应呈线性相关关系,融合指数较小的公园能获得较大的降温幅度.公园的乔木覆盖率、水体覆盖率与公园内部的地表温度呈显著相关关系,不透水面覆盖率、绿地覆盖率与公园内部的地表温度相关性不显著.公园规划设计需要结合公园的面积、周长阈值,融合指数的数值以及乔木、水体的覆盖率,充分发挥公园的冷岛效应.     

装药结构热安全性试验方法及其特点分析

目的 在装药结构的热安全性试验时选择合理的加热方法.方法 从燃料、加热速率、温度范围、温度可控性、温区可控性、对试件影响等方面对开放油池火烧、可控喷射火烧、红外辐射灯阵、电加热带、电加热箱等常用的加热方式进行对比分析.结果 对于快烤加载,红外辐射灯阵兼具开放油池火烧和可控喷射火烧的优势,能够实现温度为800～1200℃、升温速率不低于200℃/s、温度控制偏差不大于5％的模拟火烧温度稳定控制,且具备清洁环保的优势;对于慢烤加载,红外辐射灯阵兼具电加热带和电加热炉加载的优势,能够实现温升速率3.3℃/h～1.0℃/min可调节,加热温度不低于400℃,温度分区不低于4个的分区慢速烤燃温度控制,且不会给试样反应等级带来额外影响.结论 合理选择慢烤、快烤加热方式,避免对装药结构的反应等级产生影响,是装药结构的热安全性试验时需重视的一个问题.     

江苏省核辐射突发事件的预警监测体系

核辐射突发事件的监测预警体系是环境突发公共事件应急管理体系的重要组成部分,对保障核与辐射安全具有重要的意义.介绍了江苏省核辐射突发事件的监测预警体系和辐射监测网络的建设现状,通过对国际辐射预警和监测技术的广泛调研,结合江苏省实际情况,分析应对核辐射突发事件的监测预警体系存在的问题和对策,提出了相应的建设规划和建议.     

泉州市电离辐射环境跟踪研究

2016—2020年在泉州市设置9个环境γ辐射空气吸收累积剂量监测点位、1个气溶胶（2018—2020年）、1个土壤和4个水体监测点位,定量分析电离辐射环境变化趋势。结果表明,5 a来泉州市电离辐射环境变化稳定,未出现异常情况;气溶胶中7Be、210Pb活度浓度呈现春秋高、夏季低的变化规律。     

移动电话的电磁辐射对人体伤害及其预防措施的探讨

随着移动电话的迅速普及 ,由其产生的电磁辐射对人体健康的影响已成为人们关心的热门话题。笔者就移动电话的电磁辐射对人体的伤害及其有关预防措施进行探讨。旨在提醒人们正确使用手机 ,尽量减少手机辐射对人体健康的影响 ,起到宣传教育和指导作用     

Effect of Pretreatment with UV Radiation on Physical and Mechanical Properties of Photocured Jute Yarn with 1,6-Hexanediol Diacrylate (HDDA)

Jute yarns were grafted with a single impregnating monomer 1,6-hexanediol diacrylate (HDDA) in order to improve the physicomechanical properties. Jute yarns soaked for different soaking times (3, 5, 10, and 30 minutes) in HDDA+MeOH solutions at different proportions (1–10% HDDA in MeOH [v/v] along with photoinitiator Darocur-1664 [3%]) were cured under UV lamp at different UV radiation intensities (two, four, six, and eight passes). Concentration of monomer, soaking time, and intensity of UV radiation were optimized with extent of mechanical properties such as tensile strength, elongation at break, and modulus. Enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) were achieved with 5% HDDA concentration, 5-minute soaking time, fourth pass of UV radiation. To further improve the mechanical properties, the jute yarns were pretreated with UV radiation (5, 10, 15, 30, and 50 passes) and treated with optimized monomer concentration (5%). UV-pretreated samples showed the enhanced properties. The tensile strength and modulus increase up to 84% and 132%, respectively, than that of virgin jute yarn. An experiment involving water absorption capacity shows that water uptake by treated samples was much lower than that of the untreated samples. During the weathering test, treated yarns exhibited less loss of mechanical properties than untreated yarns.     

CHEMIFOG_V – A Model to Simulate Radiation Fogs and their Interaction with Vegetation and Chemistry

Radiation fog is an important modifier of atmosphericcompounds in the planetary boundary layer. In vegetated areas effects are especially pronounced due to the enlarged surface area. Besides affectingthe lower boundary of atmospheric models fog acts as amulti-phase reaction chamber leading to acid deposition. Here we present the 1-dimensional radiation fog modelCHEMIFOG_V to simulate regional radiation fogevents. The key feature of the fog model is thedetailed microphysics, where the aerosol/dropletspectrum is describedwith a joint 2-dimensional distribution, but also thedynamics, thermodynamics, and radiative transfer are calculated. Toinvestigate the interaction between fog and the biosphere amulti-layer vegetation module, including a soil module as well as a drydeposition module were coupled. Vegetation influences thedynamics, thermodynamics, and the radiation field of the lowestatmospheric layers. With CHEMIFOG_V, numerical case studieson dry and moist deposition processes on vegetation surfaces wereperformed. Hereby multi-phase chemistry and the processing of aerosolswere considered. The results show that the chemical composition of thedeposited fog droplets is mainly determined by the aerosol composition. Dry deposition fluxes are dependent on the incoming radiation and the leaves' surface conditions with respect to water coverage.Due to chemical aerosol processing and deposition, the aerosol spectrumis significantly modified in the planetary boundary layer.     

不同波段紫外光在TiO2悬浊液中的消光特点

为确定TiO₂催化剂悬浊液对不同波段紫外光的消光规律,本试验以4-CBA-Na为模型污染物,针对催化剂/污染物悬浊液体系在不同催化剂投加量下,对UVA、UVB和UVC波段光子的消光效果进行了测定.结果表明,各悬浮体系对各波段紫外光的消光基本上符合比耳定律,即随着入射光程的增加,光强呈现负指数衰减;紫外光在催化剂悬浊液中的消光系数随催化剂投加量的增大而增加,其增加规律可以用二次多项式表示;污染物溶液本身对UVB和UVC紫外光有吸收,UVB和UVC紫外光在催化剂-污染物悬浮体系中的消光系数可视为污染物与催化剂颗粒的消光系数之叠加.催化剂悬浊液对紫外光的消光系数随紫外光波长的减小而增大,这意味着使用短波长的UVC作为光催化降解光源可以提高能量利用效率.