乙醇汽油对国六直喷汽油车排放特性的影响

选择5台国六直喷汽油车采用3种不同组分的E10乙醇汽油和1种不含含氧化合物的国VI汽油,按照国六排放标准开展了WLTC循环测试,研究乙醇和基础油组分对污染物排放的影响规律.结果表明,多数国六直喷汽油车的CO、THC和PM排放有所降低,NO_x排放无明显差异,PN排放微增,所有样车的CO、THC和PM平均排放降低为6%、7%和14%.E10乙醇汽油中的重质芳香烃含量增高时,PN排放明显增加,PN排放与PMI指数呈现较强的正相关关系.     

小型燃煤机组烟气重金属排放特征研究

100 MW以下燃煤机组呈单台容量小、总台数大的特点,是燃煤重金属污染的主要排放源之一.选择7台12 MW燃煤机组,采用美国环境保护局Method 29法现场检测燃煤机组烟气重金属排放浓度,分析烟气中Hg、Pb、Cr、As的排放特征;采集机组产生的飞灰和底灰,分析除尘技术对重金属的富集特性.结果表明:100 MW以下燃煤机组烟气中重金属经脱硝除尘脱硫装置协同控制后,ρ（Hg）为0.20~0.44 μg/m3,烟气Hg以气态形式存在,其占比为100.0%;ρ（Pb）为0.5~2.6 μg/m3,烟气Pb主要以气态形式存在,其占比为38.7%~92.1%;ρ（As）为0.6~3.0 μg/m3,烟气As主要以气态形式存在,其占比为67.8%~100.0%;ρ（Cr）为3.6~23.9 μg/m3,烟气Cr主要以颗粒态形式存在,其占比为65.8%~99.2%.飞灰富集Hg、Pb、Cr、As的能力大于底灰.重金属主要富集于飞灰中的细颗粒物中,采取除尘技术可有效协同控制烟气中的Hg、Pb、Cr、As;飞灰中重金属元素Hg、Pb相对富集系数均与煤中硫含量呈负相关,半干法脱硫+袋式除尘技术对飞灰富集Hg有促进作用.小型燃煤机组烟气重金属Hg、Pb、Cr、As的排放因子分别为0.002 2~0.005 1、5~17、42~160、7~24 mg/t.研究显示,100 MW以下燃煤机组与100 MW及以上燃煤机组烟气重金属Hg、Pb、Cr、As排放特征不同,100 MW以下燃煤机组烟气Hg排放浓度较小,二者烟气Pb、Cr、As排放浓度相近,选用湿式电除尘技术可进一步降低烟气Hg、Pb、Cr、As的排放浓度.      

我国饲料粮区域产消平衡特征及政策启示

我国饲料粮消耗量大且增长迅速,已经成为我国粮食安全的首要影响因素,准确判断我国饲料粮的区域产消平衡特征对农业相关政策的制订具有重要的现实意义。论文在详细分析各省区不同畜牧产品粮食转化系数的基础上,对区域饲料粮的产消平衡状态及其原因进行了研究。结果显示：1）近年来我国饲料粮消费量快速上升,由2000年的21 730万t增长到2015年的30 549万t,15 a间增长了8 819万t。2）2015年生猪饲料粮消耗量最大,比例达到了44.4%,占据了我国饲料消耗总量的半壁江山。其次为禽蛋与禽肉消耗,消费占比分别为15.8%与12.7%;牛肉、羊肉、牛奶与水产品的饲料粮消费量比例均在5%~9%之间。3）2015年全国饲料粮总计短缺4 276万t,区域上呈现“北余南缺”的格局,东北黑龙江、吉林、内蒙古三省（区）成为我国最重要的饲料粮供应区域。从粮食转换系数与饲养结构来看,“北粮南运”现象是粮食资源的合理配置。论文提出三点政策建议：1）转变消费结构,增加牛肉与牛奶的消费量;2）推动“以粮为纲”向“粮经饲”三元种植结构转变;3）充分利用国际市场,从全球视角保护粮食安全。     

京津冀及周边地区水泥工业大气污染控制分析

以京津冀及周边地区水泥工业为研究对象,基于产排污系数法,建立了水泥工业主要大气污染物排放计算方法,对2016年该地区水泥工业主要大气污染物排放控制水平进行了分析.结果表明：京津冀及周边地区2016年水泥工业SO₂、NO_x、PM（有组织）排放量分别达到3.2×10⁴t、23.9×10⁴t、9.7×10⁴t,较2015年分别减少24.1%、18.2%、27.2%,各项污染物大幅下降.水泥工业PM无组织排放量占PM总排放量的45.4%,仍需要采取集中收集的方式加强治理.山东、河南是水泥工业SO₂、NO_x、PM、PM₁₀、PM_2.5重点排放来源,应通过化解过剩产能降低污染排放.从各工艺来看,新型干法工艺应考虑采用高效脱氮脱硫技术、协同处置技术、高效大型袋式除尘技术等新技术,进一步降低各项污染物的排放量;粉磨站也需进一步提高污染治理水平.     

基于高精度清单的京津冀机动车控污政策研究

为研究京津冀机动车污染控制政策对CO、HC、NO_x、PM_2.5、PM₁₀等污染物的减排效果,建立了2014年高精度机动车排放清单,选取过去已经实施,未来规划实施及优化/劣化后的若干政策,设置4类共13种政策情景,与实际清单基准情景进行对比,识别各政策情景的排放变化,并对其中由政府给予补贴的政策进行成本收益核算.结果显示,淘汰低排放标准机动车带来的污染减排效果最好,在天津和河北对CO和HC的排放削减分别为53.19%,49.75%和51.28%,50.87%,达半数及以上;升级机动车发动机和燃油标准也能显著削减排放,在天津和河北对PM_2.5、PM₁₀的削减分别为17.01%,17.00%和21.95%,21.93%.政府补贴政策存在明显边际效应特征,排放标准高,重污染车少的北京单位成本的减排收益明显低于天津和河北,.河北和天津在考虑成本因素的基础上,应当逐步采纳北京的高标准减排政策;北京则可在一定条件下,将一部分低效的政府补贴通过合理方式转移支付给天津和河北,以提高政府投入的减排效率.     

上海市机动车污染实时排放预警系统设计与应用

研究上海市机动车污染的动态排放测算和网格化动态排放清单构建,在实时的交通数据和交通环境监测数据的基础上,结合交通模型、机动车排放清单模型等业务模型和算法,依托大数据存储、可视化和GIS等技术,开发了上海市机动车污染物实时排放预警系统,实现了上海市全市道路的机动车动态排放测算、交通环境政策实施情景模拟和网格化排放清单,更新频率为每30 min一次,包含PM、NOx、CO、SO2、VOCs等污染物和9种车型。系统建成后直接服务于首届中国国际进口博览会,为大气污染排放实时总量跟踪评估、污染源管控措施分析及监测成因分析等提供了有力的实时数据和技术支撑。     

Incorporating natural capital into economy-wide impact analysis: a case study from Alberta

Traditionally, decision-makers have relied on economic impactestimates derived from conventional economy-wide models. Conventional models lack the environmental linkages necessary for examining environmental stewardship and economic sustainability, and in particular the ability to assess the impact of policies on natural capital. This study investigatesenvironmentally extended economic impact estimation on a regionalscale using a case study region in the province of Alberta knownas the Foothills Model Forest (FMF). Conventional economic impactmodels are environmentally extended in pursuit of enhancingpolicy analysis and local decision-making. It is found that theflexibility of the computable general equilibrium (CGE) modelingapproach offers potential for environmental extension, with a solid grounding in economic theory. The CGE approach may be the tool of the future for more complete integrated environment andeconomic impact assessment.     

Macroinvertebrate Regionalisation for use in the Management of Aquatic Ecosystems in Victoria, Australia

The development of a broader, more holistic approach to aquaticecosystem management has been called for in recent years. Physical and chemical objectives alone are no longer consideredsufficient for the protection of aquatic ecosystems and shouldbe supplemented with biological objectives. The ubiquitousand sedentary nature of macroinvertebrates, combined with theirmeasurable response to environmental conditions, favour their use as important indicators in environmental policies. To establish biological objectives, there is a need for a regionalframework to limit the variability between ecosystems. Past studies have demonstrated that an a posteriori regionalisationapproach may be more useful than an a priori approach in explaining single component (e.g. macroinvertebrates) patternsacross ecosystems. This is particularly important as aquaticresource management agencies often focus on one or twocomponents of the ecosystem to assess environmental health. This study uses an a posteriori method to delineate and describebiological regions based on edge and riffle macroinvertebrate data. The regionalisation will provide a framework for settingbiological objectives, based on the range of reference conditionsmeasured within each separate region. The objectives will includeregional checklists for taxa and biotic indices. Predictive modelling in the style of RIVPACS or AUSRIVAS will also be usedwithin each region to develop objectives, incorporating local, regional and systematic features as predictor variables.     

Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.     

炉排型城市生活垃圾焚烧炉排气中二

选择四种规模不同的炉排型生活垃圾焚烧炉,分别对其排放烟气中的二