混凝土结构施工中人因差错的模拟

以施工现场人因差错真实准确的调查实测数据为依据,笔者采用人的可靠性分析方法建立了混凝土结构施工中人因差错发生及其对混凝土强度影响规律的数学模型,并编制了相应的模拟计算程序。将该模拟计算程序所得的考虑人因差错的混凝土强度模拟计算结果与实测的混凝土强度调查结果进行比较,二者具有很好的一致性,说明该数学模型和模拟计算程序是比较符合实际的,也是比较合理的。上述模拟计算结果为考虑人因差错的结构安全性分析以及人因差错的有效控制措施研究提供了参考依据。     

基于灰预测模型的大跨度预应力混凝土桥梁施工监测

运用灰色系统理论,建立大跨度预应力砼刚构-连续组合梁桥悬臂浇筑施工梁段立模标高预测的GM(1,1)模型,并用残差的GM(1,1)模型对其进行修正;同时把该预测模型应用于松原龙华松花江特大桥实际工程;其结果表明梁段立模标高预测精度较高,完全能够满足工程的需要,为同类桥梁的施工监测提供参考。     

考虑人因差错影响的结构可靠度计算方法

通过对单个或任意多个人因差错影响下构件截面失效概率计算方法的分析讨论,推导出在理想已知条件下的数学解析求解公式;在考虑人因差错对结构参数影响程度的空间离散化后,得出了相应的简化计算方法;并以一个单筋梁的正截面为例进行了失效概率计算和人因差错影响程度分析.在目前人因差错的发生及其影响规律的研究不完善、缺乏必要的数学模型的现实条件下,该方法对人因差错影响下构件截面失效概率的分析计算有一定的实用价值.     

植被混凝土无侧限抗压强度的室内试验初探

通过对植被混凝土室内试验结果的归纳和分析,研究了水泥掺入比、龄期和浸水条件对植被混凝土无侧限抗压强度的影响。     

SRHSC梁主要设计参数损伤敏感度分析

以型钢高强混凝土(SRHSC)梁为研究对象,结合SRHSC梁受力机理及承载能力的试验研究成果,提出了极限状态下的承载能力是评价梁力学性能的关键指标,将损伤前后梁正截面抗弯承载力之比和斜截面抗剪承载力之比的均值作为自变量,给出了SRHSC梁损伤表征函数,并借助"预定损伤法",揭示了主要设计参数对SRHSC梁损伤演化的影响规律。研究成果将为建立地震激励下SRHSC框架结构楼层损伤模型提供理论和数据支持。     

AHP based life cycle sustainability assessment (LCSA) framework: a case study of six storey wood frame and concrete frame buildings in Vancouver

Construction and building industry is in dire need for developing sustainability assessment frameworks that can evaluate and integrate related environmental and socioeconomic impacts. This paper discusses an analytic hierarchy process (AHP) based sustainability evaluation framework for mid-rise residential buildings based on a broad range of environmental and socioeconomic criteria. A cradle to grave life cycle assessment technique was applied to identify, classify, and assess triple bottom line (TBL) sustainability performance indicators of buildings. Then, the AHP was applied to aggregate the impacts into a unified sustainability index. The framework is demonstrated through a case study to investigate two six storey structural systems (i.e. concrete and wood) in Vancouver, Canada. The results of this paper show that the environmental performance of a building in Canada, even in regions with milder weather such as Vancouver, is highly dependent on service life energy, rather than structural materials.     

Chloride Released from Three Permeable Pavement Surfaces after Winter Salt Application

Few studies exist on how chloride from chloride‐based deicers is transported in infiltration‐based stormwater control measures. In 2009, the U.S. Environmental Protection Agency (USEPA) constructed a 0.4 ha parking lot in Edison, New Jersey, that was surfaced with permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA). Each surface type has four equally sized, lined sections that direct all infiltrate to separate 5.7 m³ collection tanks. The USEPA acute criterion for aquatic life (860 mg/l) was exceeded in events immediately following a snow event. Concentrations of the infiltrate exceeded the detection limit (5 mg/l) year round but did not exceed the USEPA chronic toxicity (230 mg/l) after April. The chloride concentration decreased with cumulative rainfall since previous snow event, and a power regression described this relationship. In the power regression, the coefficient (b) described the initial concentration following a snow event, and the exponent (m) described the rate in which chloride was flushed through the system with infiltrating water. PC had the largest coefficient (5,664) and largest absolute exponent (?0.92), followed closely by PICP (b = 4,943 and m = ?0.87), and distantly by PA (b = 2,907 and m = ?0.67). The differences in release rate were proportional to the measured surface infiltration rates of 4,000; 2,400; and 200 cm/h for PC, PICP, and PA, respectively. These results will assist those who manage or regulate stormwater where receiving waters are chloride impaired.     

爆炸荷载作用下钢筋混凝土防爆墙动力响应研究

为了研究钢筋混凝土防爆墙的抗爆能力,采用有限元分析方法对不同纵向配筋率、不同高跨比、不同厚度的墙体在爆炸动态荷载作用下的动力响应进行研究,对各种不同设置的钢筋混凝土防爆墙的抗爆性能进行评估。结果表明:减小高跨比对提高钢筋混凝土防爆墙的抗爆能力最为重要,提高纵向配筋率,增加厚度都能增加防爆墙的抗爆能力。     

废弃混凝土对C_3S形成动力学的影响

废弃混凝土中石灰石的含量比较稳定,适合取代天然石灰石作为钙质原料配制水泥生料,并含有少量的SiO2,可以起部分硅质原料的作用。硬化的水泥浆体在高温下脱水形成氧化钙、氧化铝和氧化铁等氧化物,都是制造水泥所必须的氧化物。实验室利用20%和40%的废弃混凝土代替部分石灰石制备水泥熟料。研究了废弃混凝土对硅酸盐水泥熟料形成动力学的影响。用快速滴定法测定了不同熟料中f-CaO含量,根据文章提出CaO反应生成C3S的转化率,并用Amhenius公式计算了熟料中C3S形成反应的表观活化能。研究表明:废弃混凝土能改善生料的易烧性,并能降低熟料的烧成温度。     

Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications

Biocomposites were made by a novel high volume processing technique named biocomposite sheet molding compound panel (BCSMCP) manufacturing process. This process design was inspired by the commercial glass fiber–polyester resin composite fabrication method called sheet molding compounding (SMC). This process yields continuous production of biocomposites on a large scale, and thus can be easily adopted in industries. A unique fiber dispersion method, which enabled uniform distribution of natural fibers, was used in this process. Consistency of the process was tested by evaluating the repeatability of the resultant materials mechanical properties. The low cost biocomposites produced as a result of the processing will be used for various panel applications such as housing and transportation. The molded samples were tested for various mechanical and thermal properties, in accordance with ASTM procedures. The biocomposites were made with various natural fibers including, big blue stem grass, jute, and industrial hemp. By combining different natural fibers in varying mass fractions, hybrid biocomposites were made using this process. Grass fiber reinforced polyester biocomposites processed by the SMC line showed very promising results.