利用烧结炼铁工艺环保处理铬渣

论述了铬渣的产生、组成、特性,利用冶金生产中的烧结炼铁生产工艺对其进行解毒的机理、配加处理铬渣的工艺流程、配加比例和对烧结矿生产工艺参数的影响情况,利用该法对其解毒处理的优势,及解毒处理中防止二次污染和个人防护措施.     

Arsenic stabilization by zero-valent iron,bauxite residue,and zeolite at a contaminated site planting Panax notoginseng

Panax notoginseng (Burk.) F.H. Chen, a rare traditional Chinese medicinal herb, is a widely used phytomedicine used all over the world. In recent years, the arsenic contamination of the herb and its relative products becomes a serious problem due to elevated soil As concentration. This study aimed to evaluate the effects of different types and dosages of amendments on As stabilization in soil and its uptake by P. notoginseng. Results showed that comparing to control treatment, the As concentrations of P. notoginseng declined by 49–63%, 43–61% and 52–66% in 0.25% zero-valent iron (Fe(0)), 0.5% bauxite residue, and 1% zeolite treatment, respectively; whereas the biomasses were elevated by 62–116%, 45–152% and 114–265%, respectively. The As(III) proportions of P. notoginseng increased by 8%, 9%, and 8%, and the transfer factors of As from root to shoot increased by 37%, 42% and 84% in the optimal treatments of Fe(0), bauxite residue, and zeolite. For soil As, all the three amendments could transform the non-specifically adsorbed As fraction to hydrous oxides Fe/Al fractions (by Fe(0) and red mud) or specifically adsorbed As fraction (by zeolite), therefore reduced the bioavailability of soil As. With a comprehensive consideration of stabilization efficiency, plant growth, environmental influence, and cost, Fe(0) appeared to be the best amendment, and zeolite could also be a good choice. In conclusion, this study was of significance in developing As contamination control in P. notoginseng planting areas, and even other areas for medicinal herb growing.     

高分子量高纯度阳离子聚丙烯酰胺的合成

以丙烯酰胺与丙烯酰氧乙基三甲基氯化铵为单体,在复合引发剂的作用下,选择水溶液共聚法合成高分子量与高纯度阳离子型聚丙烯酰胺(CPAM)。实验表明,有机偶氮引发剂A用量0.5‰、氧化还原引发剂用量0.45‰、还原剂与氧化剂摩尔比2∶1、反应体系pH为4与反应时间5 h条件下,CPAM分子量为1 042万,且溶解性好。通过对聚合物残单含量影响因素添加剂用量、反应时间的研究,结果表明,添加剂EDTA和增溶剂D对残留AM含量影响小,而苯甲酸钠对聚合物残留AM的含量影响显著;延长反应时间至7 h,残单含量可降低至0.27%,CPAM的纯度高。通过与国内外3种同类型产品进行对比,结果表明,自制产品的分子量明显高于其他产品,且残单含量比国内产品降低了50%～75%。     

微量元素对牛粪低温厌氧发酵的影响

为考察较低温度(<17℃)条件下添加微量金属元素对厌氧发酵产气量的影响,在发酵底物TS(含固率)为10%下采用10 L玻璃瓶作反应器,以牛粪为原料,向厌氧生物反应器中分别添加MnSO4、FeSO4·7H2O、电解锰渣,分析了厌氧消化系统运行过程中的产气量、COD(化学需氧量)和pH的变化。结果表明,锰元素能促进低温下牛粪的厌氧发酵,加速反应启动。当添加6 g MnSO4、100 g电解锰渣时,单位质量VS产气率分别为0.26 mL/g和0.64 mL/g,添加6 g FeSO4·7H2O与空白对照组均未见明显产气。     

生活小区供暖系统的问题及对策

针对神龙襄樊生活小区的供暖现状,结合襄樊基地供热管网的运行情况,就小区普遍存在的供暖个别单体不热、冷暖不均、管网失调、系统存气等问题,作了具体分析,并提出解决办法以供探讨.     

典型铬渣简易掩埋场铬渣及土壤铬污染特征和处置分析

通过钻孔采样分析,研究了典型铬渣简易掩埋场地下铬渣及土壤铬中Cr6 、总Cr的分布特征和污染状况,结果表明,铬渣简易掩埋场铬污染程度严重,引起了周边和地下深部较大面积的土壤污染,深度达到了地下的基岩.铬含量在土壤层剖面中分布呈现规律性变化,即随土壤深度增加,Cr6 、总Cr含量逐渐下降,但绝大多数超过了危险废物毒性鉴别标准.从铬污染程度上看,总体上存在铬渣>土壤>人工填土.在此基础上,提出了铬渣及污染土壤的处置方式,为铬渣污染治理和资源化利用提供科学依据.     

Heavy metals' content of automotive shredder residues (ASR): evaluation of environmental risk

Every year between 8 and 9 millions of vehicles in the European Union arrive to their end of life. Car wastes can have a very high metal content, falling into hazardous waste class. A preliminary evaluation of these wastes could be made by metals' leaching test runs which is the main objective of the present study. Evaluation of the total metal content was carried out by X-ray fluorescence and the mobility of these metals using two simple standardized extractions such as the TCLP (Toxicity Characterisation Leaching Procedure) of the US EPA and the German leaching test DIN 38414-S4. Additionally, an extraction test with acetone was performed in order to recognise metals bounded to organic matter. The results show that the total metal content of the ASR can overpass the established values for inert residues. Lead and zinc contents are fairly well correlated with grain-size, whilst other metals' contents do not exhibit clear grain-size dependence.     

甲烷氧化菌在填埋场覆盖层中的工程应用(Ⅱ):基质选择性及长效性

针对已筛选获得的甲烷氧化混合菌,选取填埋场覆盖土(LCS)、矿化垃圾(AR)和塘渣(TZ)3种填埋场周边易得的材料为供试生存基质,从基质选择性及长效性角度进行了甲烷减排应用条件的探究及使用效能评估.结果表明,在TZ、LCS、AR、TZ-AR和LCS-AR这5种生存基质中,TZ-AR最适合甲烷氧化混合菌的生长,且TZ与AR的复配比例以5∶5为最佳.甲烷氧化混合菌在TZ-AR的粒径≤4 mm和含水率为20%时具有最高甲烷氧化能力.一次性接种甲烷氧化混合菌在静态体系中的最佳使用有效期为31 d.其在接种量为0.08、0.16、0.20 m L·g-1和0.25m L·g-1时甲烷氧化速率无明显差异,从工程应用角度而言,8%的接种量为最佳.     

多年连续种植转基因Bt汕优63稻田水体和土壤中Cry1Ab/c蛋白残留调查

以湖北武汉、随州、武穴和孝感以及山东德州5个多年转基因水稻种植区为试验地,在水稻生育期采集转cry1 Ab/c基因水稻Bt汕优63(Bt-SY63)和对照非转基因汕优63(SY63)稻田水体和土壤,使用酶联免疫吸附测定(ELISA)方法对稻田水体和土壤Cry1 Ab/c蛋白残留量进行动态监测.结果显示,与SY63稻田相比,连续种植2～4 a后,不同生育期Bt-SY63稻田水体Cry1Ab/c蛋白残留量大多与同一生育期SY63样品间差异未达显著水平(P＞0.05),最高残留量为0.373 ng· mL-1.与水体Cry1Ab/c蛋白残留情况相似,不同生育期Bt-SY63稻田土壤Cry 1Ab/c蛋白残留量大都低于试剂盒检测限(0.25 ng·g-1),仅随州苗期、德州拔节期和开花期样品有微量残留,鲜土残留量分别为0.261、0.540和0.361 ng·g-1,并分别与SY63样品间差异显著(P＜0.05).另外,多年连续种植Bt-SY63水稻后,2、3和4a种植年限的Bt-SY63稻田水体和土壤中Cry1Ab/c蛋白残留量之间大都没有显著差异(P＞0.05).认为连续种植2、3和4a的Bt-SY63水稻稻田水体和土壤仅存在微量Cry1Ab/c蛋白残留,不会造成Cry1Ab/c蛋白在稻田水体和土壤中的累积.     

Importance of information on tillage practices in the modelling of environmental processes and in the use of environmental indicators

Tillage has been and will always be integral to crop production. Tillage can result in the degradation of soil, water, and air quality. Of all farm management practices, tillage may have the greatest impact on the environment. A wide variety of tillage equipment, practices and systems are available to farmers, providing opportunities to enhance environmental performance. These opportunities have made tillage a popular focus of environmental policies and programs such as environmental indicators for agriculture. This paper provides a very brief examination of the role of tillage in crop production, its effect on biophysical processes and, therefore, its impact on the environment. Models of biophysical processes are briefly examined to demonstrate the importance of tillage relative to other farm management practices and to demonstrate the detail of tillage data that these models can demand. The focus of this paper is an examination of the use of information on tillage in Canada's agri-environmental indicators initiative, National Agri-environmental Health Analysis and Reporting Program (NAHARP). Information on tillage is required for several of the indicators in NAHARP. The type of data used, its source, and its quality are discussed. Recommendations regarding the collection of tillage data and use of tillage information are presented.